Amplifiers / Head Units / Processors / Electrical

http://cgi.ebay.com/Clarion-Pro-Audio-DRZ9...1QQcmdZViewItem

i read what i could find on what makes an amp what class but nothing on how each performs. why i'm wondering is i'm considering using an ab amp bridged for my sub. i'm trying for what i would imagine is described as LSQ.

ok here it is I think that I'll be going with either the opti 6000 or the VFL 500.1 any input on which one would be greatly helpfull. Also if there are any others in the same price (1500-2000) feel free to post them. Thanks

i have a Kicker KQ5 i picked up for 50 bux. i had it posted for sale, 2 people are interested, but i think i wanna keep it now becuase its black, and lights up green or amber, and amber lights match my interior perfect. i was gonna get the clarion 7 band one i think it was for like 80 new, but it only lights up blue which would be the only blue, and stand out horribly. my amps im getting (MTX) will even light up amber to match! (my nakamichi cd-400 does too) any other EQ's that have amber lighting?

I have a 2000 Chevy Blazer(s10) I was wonderin if anyone could tell me what size alt. I need I will be runnin around 2400rms thankx for any help

alright, i got 2 kinetik 1800s. I was originally just going to take out the stock battery and put one under the hood and the other in the back. But i just want to ask a few more knowledgeable people first, should i just leave the stock battery under my hood in the tundra and put both kinetiks in the back? thanks

I have a 12" kicker l7 2ohm dvc sub needs 750watts rms i would like to get the kicker 750.1 but i cant wire it to 2ohms to get 750watts so i have to go with something like this. Also are hifonics amps any good? # No. OF CHANNELS: 2 # OUTPUT (watts):RMS @ 4 Ohms 220x2 # RMS @ 2 Ohms 380x2 # RMS @ 4 Ohm Mono 760x1 # T.H.D.: 0.02% # FREQ. RESPONSE (Hz): 10 - 30k # SIGNAL TO NOISE RATIO: >97dB # DAMPING FACTOR: >200 # INPUT SENSITVITY: 0.5 - 4.0V # CROSOVER SLOPES: 12dB # CROSSOVER FREQUENCY: High-Pass(Hz) 50 - 600 # Low-Pass(Hz) 50 - 150 # SUBWOFFER EQ: 0 - 18dB 0 # SUBWOOFER EQ FREQ. (Hz) : 40 - 120 # DIMENSIONS (INCHES): 9.5x2.5x20.0 # Fully regulated MOSFET power s…

cause I dont want to but another rca cable NOW when im just going to get a couple inst. kits later down the line. I have my my 4channel amp running only the fronts right now with a rca cable and no inputs to the rear soooo its ok if I hook up all the wiring to the high input harness and leave out the fronts input?

Looking for an amp that is at least 750watts rms for a kicker L7. What brand is better Hifonics or Soundstream? The amps that i am looking at from the 2 company's SOUNDSTREAM PCA2.760 2 CHANNEL 760 WATT AMPLIFIER NEW AND HIFONICS TXi7506 750W MONO AMPLIFIER AMP TITAN TXi 7506

yeah, i know, not the best amp by far, but my cousin's truck go broken into, and his audison srx3 will be out of the picture for a little while. we have a powerbass asa 400.4 sitting around, and want to use it until we can get a new audison. now, for the big question... does anyone know if the powerbass in tri-mode capable/stable? we want to use channels 1 and 2 for the comps, and bridge 3 and 4 for a sub. a 15" dayton titanic mk III will replace the 12" type r that was in there, although a type r will be back again... probably. full system rundown 2000 chevy s10 ext cab clarion dxz775usb hu audison srx3... now gone diamond d6 comps in the doors, textile tweets, +3 to…

I've heard a lot of people complain about the same problem, but what do I do to solve it? If, I need to reground something, which wire/s go where? I'm not too knowledgeable about this nor did I install this on my own. My truck is an 06 Silverado

Hey Im thinking of selling my sony xm-5046's but have no clue as to how much theyre worth now. I was wondering whats a reasonable price. anyones opinion with prior knowledge of these amps would be greatly appreciated.

Hey I was wondering what good cheaper amps (around 300) would run two SSD 10s with copper coils. I have two in the mail right. Do I need to give each 800 watts to be decently loud? Also wondering if will likely need to do any changes to my electrical system. I've tried to see what amperage my alternator puts out but cant find info, so if you know what an '06 Rav4 without tow package does that would help a lot. Otherwise I think I'm gonna call the dealer. Thanks for any help!

Well, I was planning on running two 15 or 18 Fi audio Q/Bl/Btl. On on a orion 2500D. but found a RF T30001 BD for like $750, seems like a good upgrade for not much more...right? opinions..?

Are there any good non D class amps that can push my twin RE SE 12s

My girlfriend keeps getting shocked when she gets out of the car and touches the door Could a bad ground cause this?

does anyone make a 4ch amp this big?

Hi Thomas! The surface mounted board has been damaged on your unit. They do not make this part anymore.. This is going require patience in locating another usable surface mounted board at about $75. to $100. extra plus the $119.95 already quoted. Do you want to authorize us to proceed? or at this point a $35.00 fee plus shipping is applied. (evaluation estimate fee). Please let us know your wishes on this repair. A repair time of two to four weeks is estimated after your authorization to proceed. arsehos quoted me 100$ Wrong So theres 60$ shipping $119.95 + 100 for parts. fudge i could have just bought another orion 2500D

I am looking at an amp for my pioneer premiere ts-c720prs speakers and came across a refurbished usx2080 for $50 plus shipping... It does 80rms at 4 ohms and is made by zed audio... Just wondering if anyone knows anything about these? Here is a link to them on the ebay page... http://cgi.ebay.com/US-Acoustics-USX...d=p16 38.m118 I was also wondering about a us acoustics usa2100.... Can't seem to find much specs on this amp... I think i can get it pretty cheap though.... I have found some things that say 100x2 at 4 ohms... I am also wondering how these compare to a zx250.2 or a kz250.2 cause i can get refurbed of both of those for 65-80 plus shipping... Also, what is the d…

Okay guys, My wife has been beggin me to get her new truck (2007) silverado Crew to sound similar to my old S-10. In the S-10 I had a downfiring box with Solobaric S10D's 4ohm running mono on a US 1000X Some might say it was a little overkill but I had it turned down and was probaly one of the cleanest systems that I had herd (Yes I know just my preference) I also had MB Quart Q's for mids and Highs running off a PPI PCX280 which I still have the Quarts and the PPI. Okay you might be wondering where I am going with this. I am looking for a little help for powering these subs, and keeping the SQ good. The sq was amazing with my US amp and it pounded at the same tim…

I'm in the market for a new processor, and I'm hoping a new one came out, or got updated. Any news?

ta92001. anyone messed with this amp? rated 3k @ 1 ohm, birthsheets supposedly read around 3.8k @ 14.4v true? good amps? looking to get one to be run @ 1 ohm on an 18" mt. also looking at getting the ta91002 (750w x 2 @ 1 ohm) and the ta7402 (i think thats it) discuss.

I was looking for a 1000 watts RMS amplifier at either 2 or 1 ohm... I am gonna put it to a 12" Fi SSD... Also, how much of a difference in sound will there be between 750rms and 1000rms? I was looking at a zx1000.1 but was wondering if there is anything as good for cheaper... I figured if i got it at 1 ohm it would be cheaper for the wattage vs. 2 ohm 1000 watts...

lol :shock: sorry would have got more pics but that damn thing is heavy lol....... let me know what ya guys think

Im looking @ getting a amp for my SE and dont know which way to go. Im kinda on a budget but im open to all ideas. Want to feed it as close to 600 rms as i can. off topic: Hi to all, im new here