Amplifiers / Head Units / Processors / Electrical

Hello! I really am looking forward to upgrading my car audio but have run into "crossroads". I would love to go the raw driver option, but I do not know or think I'm inclined enough to get an active crossover.. in your opinions, is it difficult? Or does it just take a lot of patience..I only ask because I have my eye on a Focal K2 Power 130 which would have it's passive crossover. Also have my eyes on jbl 670 GTIS component set.

http://caraudiomag.com/articles/copper-wire-vs-copper-clad-aluminum-wire-wire-warnings

i just ordered the new fosgate t1500x1 and was wondering if anyone could tell me what the birth sheet says for the total output?

4 channel amplifier with bandpass capabilities ... 150w x 4 @ 14v.... More info http://www.phoenixgold.com/products/amplifiers/Elite/product.php?productID=75 Each click on the crossover dial has a set point??? WTF?!?!?!?! clicks amazing!!!

I got this from the12volt.com---hope it helps.

Here is my power for '05. A nice little pair of CC-d2400's on a CSX 18. Sounds like a winner to me!

Have you guys heard anything bad about the Pioneer DEX-P99RS? It would be perfect for my three way front stage. I love the idea of having a processor and HU all in one unit. It is expensive compared to other HU's but if you look at the price of a processor plus an HU then the price of the P99RS isn't so bad.

Looked around for a bit and decided to go with this dual rectifier alt from alternatorparts.com . I ran it via specs of their website ( BTW i got the Quicktifier210 with a 220 amp denso alt). Guy told me it would do full output at 1200rpm( 120 i think at Idle). I upgraded the big three and ran it all with 1/0 Knu Koncept Kolossus wire. I am not running much, Double din JVC HU and a lightning audio 600.2 on a single W0 10. Gain is set to half. Optima Red top batt. My ordeal is, that the moment I put it in gear everything dims. And, if i have a few things on ( IE. air, turn sigs, headlights) things seem to get a bit worse. I took the gauge cluster out and cleaned everythi…

Hey guys, I'm pretty new to the forum, I've been lurking for awhile trying to learn as much as I can. Anyways, I've had a 15" Memphis sub and a Memphis Power Reference P200.2 two channel amp for awhile. Lately my sub started to sound like it was fixing to go. I found someone selling two Memphis 12s in a box on Craigslist. I went and met the guy and hooked up the speakers, and they sounded good, so I paid the guy and started to get on my way. The speaker wires this guy had for the 12s were crimped and part of the metal was exposed. I went to push the box the rest of the way into my Explorer, and like an idiot, I let the exposed metal on the speaker wires make contact. Smok…

I'm seein if i can save money but if i cant oh well.... This is for 2 AQ2200ds(200A per) and a sundown 100.4(90A rated about 65A used) Here are choices - Kinetik (i might go with powermaster but prices are bout the same so this is just the sake of kinetik) setup 1- 1 HC2400 (128aH) 2 HC800s (72aH total) Price - $632 setup 2- 3 HC1400s (180aH total) Price - $695 setup 3- 1 HC2400 (128aH) 2 HC1400s (120aH total) Price - $799 Kinetik has told me that their HC800 will give more impact than their batts above that model number meaning quicker discharge, like a cap. A while back, i emailed them requesting their suggestion for a 3,000w setup but obviously i've gone bigger, heh…

I'm currently in the process of designing/setting up my first system. I currently have a pioneer deh-p690ub head unit but haven't been able to figure out all of its features yet. Can i have an active front stage with this headunit? I have a set of focal 6.5 V2 polyglass components, not installed, but i'm thinking about returning them to tweeter because after browsing through the threads here I'm sure i can get a better front stage for the money. Any input would be helpful, thanks.

I currently have a Kenwood Excelon 891 hu and have been happy until now. I'm looking for another clean 24 bit dac, cd, mp3 player. This one is under warrenty getting fixed and thinking about another. I just want a clean sounding quality cd player that can play ipod and sirius. I want sound quality over anything. Any suggestions I'm at a loss on where to go what brand and such. Thinking about Alpine 9887, what do you guys think?

hello right now i have a jl 1000/1 powering a 18" bl..i'm thinking about switching to a kicker zx1500.1 what do you guys think? i was impressed with the jl but i feel it could use more power, plus the jl chit out on me after a couple months so i kinda wanna sell it after it gets fixed/replaced under warranty...what do you guys think?

SparkFun Electronics - DSO Nano - Pocket-Sized Digital Oscilloscope seems pretty decent, not sure if it covers the ranges needed to detect clipping from HU and also to set my gains properly...Any input? Thanks.

http://www.dealercostcaraudio.com/P1000.1.aspx Crunch, isn't that the same brand as hifonics? 1 Channel operation RMS Power @ 1 Ohm: 1000W x 1 RMS Power @ 2 Ohm: 500W x 1 RMS Power @ 4 Ohm: 250W x 1 Mono-Block A/B class amplifier topography MOSFET outputs Illuminated Crunch logo PWM digital power supply Fully adjustable crossovers, Hi-Pass and Low-Pass Silver RCA line inputs & outputs - permit amplifier daisy-chaining Silver power connections for $149.00

i was looking around on the net i saw this amp audiopipe 30001d its 30inch long wow has anyone used them? you can get them for cheap 400 also has anyone used the 2 channel and for channel amps?

okay, I got my Mach 5 15's and i love them. But until i get the money to get the Sundown amp, I need to figure out which amp I need to use in the mean time. So I have two amps, obviously. I just need to know which amp would be better off for me. I am looking for accurate punchy bass more than I am loudness. So please help me out and let me know which is better. Thanks Guys ~MadroX

Going through some stuff I had in the attic and I ran across a Hifonics Thor Series VII amp Hooked it up in my truck and it works great. Only rated at 250 watts but running it bridged with a kicker 10" truck box and it pounds! Anyone know much about this relic? and of course I find it a month after buying a kicker zx400.1 amp for my Trans Am...would of used it and saved some cash.

I was just wondering what are you guys's thoughs on the following brands of amps. US Acoustic Memphis Hifonics MA Audio Infinity And wich one would you trust the most.

First DIY battery bank for my daily 2ssa evil 18 taramp md8k 320amp alt. This bank will be dedicated for the audio ONLY.. My question is had anybody had any luck or first hand experience with these?

Just wonseeing if anyone had experience with or had heard thoughts on an Orion XTR-3 crossover

i plan on doing some competing in dbdrag next year and i wanted to hear any experiences any of you have had with this amp. al

So I've been pondering the idea for a while, but now I've started to putting it in real sense. I would like to take all my audio/video source into one media source. Now, I'm aware of people placing "Carputer"s into their vehicle, I guess in a sense, this is what I would like to do, but not 100%. I would still like to keep a 7" DVD unit as the headunit and the brains of my vehicle. Currently, I have the Pioneer 4300DVD, but I also have my eye on the Clarion NX702. Either system supports many ways to go about extending its media source. So currently, I've been using my ipod for the most of my music, and music videos. Then I would use the the cd/dvd slot for watching movies…

Picking up one from a friend as part of a great package deal in a few days and i am trying to get a little feedback from anyone who is familiar with them. It should suffice for now until i have time and $$$ to build something better. I'm picking up the amp, a Rockford T210d2 sub, a sealed box thats basically useless but still, and a 0 awg wire kit for 350 dollars. Basically i just wanna know if the amp or the sub are the weaker link and which i should replace first. and also if you guys think that it will run an icon 12 ok until i get my sundown? and then hopefully an Xcon insides look fairly beefy

so ive been looking for headunits lately since i sold my audiovox flip out. ive been looking for something with a nice high voltage preout and the best i can find around here is the clarion DXZ785USB with a 6 volt pre out. overall i like the look of the unit jsut wondering what peopel thought of this unit as far as features, sound quality, durability ect go? thanks