Amplifiers / Head Units / Processors / Electrical

Can anyone recommend a good working EQ. I used to have an old PPI unit with my old set up, but I don't think it works anymore. I plan to get a SS RL-p 12, either the USAmps 2080 or 2100, CDT CL-62 and I already have a Diamond Audio 1200.1 for the sub. Are their any that I should stay away from?

yea i have this old PG XS4600 i bought a few months ago, and this guy said it workd. apparently it didnt. powered on and everything, but it blew the set of CDT's it was connected to. it sounded like the speaker was bein hooked up to a wall socket, like pure power. Whats wrong with it? heres a pic of the guts. looks fine:

so i fried something in the amp, i think they are called the output transistors. i have pics if any one is intersted i can send a pm. here's the story: so tonight, i am finally exited to get my subs into the car and start wangin. let me tell you what happened before tonight though. about a week or so ago, i already had my box completed (not finished though) me and my bro went out to test it with the nine.1. we tried it facing up first and it was working fine, then we decided to test it facing the rear and it still no problems. then I wanted to try facing up one more time. this time, I heard something pop as soon as I turned it on and then all four 30 amps blew. one more t…

i've got a crossfire vr2000d thats supposedly been modded to be .5 ohm stable and handle high voltage. it has 2 hookups each for power, remote, and ground. these all need to be hooked up right? how can i test the amp beforehand to see if i can run it daily at 1 ohm? it should do around 2800x1 @ 1 ohm, and i'll be using 1800-2kw of that for my 12's, so it wont be running full tilt but about 2/3. anything else i need to know before firing up this beast?

I need to get 2 12v fans (one in, one out) for my enclosed amprack, but I'm a little confused as to which to get. Some have 3 wires coming out of them, some have 4. My amps already have outputs to power up external fans, which consists of a positive and negative (http://www.dls.se/images/highres/A5_F.jpg). So I'm just wondering which fans you guys have used and which you liked. Thanks yall.

Well... I reciently bought a Pioneer DEH-P940MP. I was planning to run the front speakers acvive and the rears passive. However, I didnt see in the manual that you can do this. I NEED rear fill, burbs are huge inside, components up front arent going to be able to be heard way in the back. I do carry passengers. I had 2 ideas on how to accomplish this. Run a LOC off the H/U's rear speaker outputs to the amp for the back speakers. Thats if the signal is not seperate (trebel/midrange). I dont know if the internal amp even works in this mode. It cant be shut off so its definetly on. Or... Get 4 Y splitters. Use the output RCA's on the amp and " blend" the treble and mid range…

Dave Navone says that you should use a -10dB tone to set your amps gains for a 3:1 ratio overlap. Should I do that? I've been using the 0dB tones. Switch?

so yea before i start buying and end up with tons of stuff that i can't use, i want your all's opinions. The setup i'm going to have is... avalanche sub (dvc both coils ran to terminals on box) orion 1200d amp running @ 1 ohm, but want capable of running at 1/2 (in case i get another ava) so i'm guessing 1/0 power wire instead of my 4ga Pioneer 35w X 2 @4ohm (has scoshe kit running to it now, looks like 10g power wire)...going to run it to my tweets eventually cadence z1200c (best info i can find says 250W X 2 @ 4ohm) going to run comps off this eventually) soo, here's my ideas so far, i'm wanting to go with knukonceptz unless someone knows a better brand that is less e…

I lost my Leadtek program with all different wire colors. I would appreciate if someone could host it for me, or just tell me what color the wire for accessories are on a 2003 chevy malibu. Pretty sure its brown but i am just making sure. thanks. al

http://www.profilecaraudio.com/crossovers.htm i just need something to cross over my subs with, nothing fancy. what are yall opinions on this?

hey... i was wondering... if you paint an amp, will it hinder the cooling process of the heatsink? i wanna paint a Profile CA400 black to match the dual EU box.

this is a WHOLE new world for me. this is what i have come up with... ID CD1Pro's Some nice midbass Drivers...hoping to run them at 2 ohms if possible for 100w. any suggestions? and an EQ/crossover type thing, im really confused on how that works. Do i hook all my amps to a single EQ? do i need to run any wires to my HU? i want a cheap one, just enough to get by. i was thinking about just using my HU's crossovers to mess with everything, or should i buy xternal ones? but im really lacking in the EQ part... i dont think a 3-band would cut it with the horns all of this is going to be thru one 4 channel amp. any suggestions and advice would be greatly appreciated

I know that there are some good amp companies out there, i need a suggestion for, a single 3way comp set up front and 2 15" SI Mag D2s. Comp watts needed 400 total, 2 channel. Sub watts needed 2.5K-3K total mono/ or 2 mono d block amps. Any suggestions for these wattages... moneys not the issue but i dont wana spend alot. I want quality stuff. But not over the top. any suggestions welcome.

Anyone ever used one? Thoughts? I'm thinking about picking up a couple, for future uses.

Well, I got this HU brand new last year. I love it (but im gonna be gettin a DEH-P860MP when I can afford it), but for now this thing will work. However, when I turn it off, then turn it back on, it takes 13 seconds to load the CD and resume play, on an MP3 CD. I know that may not sound like a long time, but it really is. Anywayz, when I stick in a regular CD, the resume time is 3 seconds or a little less. It used to load my MP3 CD's just as fast as it does regular CD's. It started doin this for some reason for a while, then I hit it or sumthin, and it started workin fine again. But now, since I loaded a regular CD in, it started loadin my MP3 CD slowly again. I cant get …

A buddy had a Nitro 2000W Amp hooked up to 2 10 inch Rockford HX2's (2210 Model) and I sayed I dont even think those subs felt the amp at all but he says its 2-Ohm stable and so I looked up the AMP on E-Bay and u can grab this amp for about a 125.00 bucks w/shipping! I say its garbage! Anyone else had experience with this amp? Thanks

Could I use power wire to power my subs? I was thinking about using this stuff... http://www.knukonceptz.com/productDetail.cfm?prodID=KOL8BL

Is MA Audio any good? I think they are but haven't heard any myself. Thanks a lot.

http://cgi.ebay.com/SONY-ELECTRONIC-CROSSO...1QQcmdZViewItem Anyone know where I can find more specs on it?

I'm looking at a Sherwood A100X4 for $80. Are they any good? I can't find much info about any of their newer stuff.

This has been bugging me so help! For my daily driver SQ system I need to power: 12" Soundsplinter Rl-p --sealed 7" Seas W18e0001 -- IB in custom kicks Alpine F1 Status Tweet D2904/61001 on a pillars Old School Amplifiers I have already--power listed at 4 ohms: PG zx475ti -- 75x4 , 250x2 PG M44 -- 55x4, 160x2 Alpine 3032 -- 30x2 Sony XM-3520 -- 35x2 Pioneer GM-2000 -- 50x2 My current setup has the zx475 running the Rl-p with 250w on ea coil and the M44 bridged running my front stage passive. I plan on using the setup as is but going active and using one of my other amps for powering the tweeters. My concern with the Alpine is the lack of gains and its size. The other…

I'm considering buying a used Avionixx AXA440.4 for around $100. Any opinions? They're rated at 85x4 W RMS @ 4 ohm but are supposed to put out around 100W. Any info would be great.

I need to order 3 pair of RCA's before the SWVA TeamSSAudio meet, wanting to install 8053, anyway, I have not bought high end RCA's in a while, and I am not going to buy monster cable, I have bought mostly decent RCA's for normal needs. For this install, hopefuly for SQ competition, if not just for high end SQ in my car. I would like to stay under $50ish. I am considering the Knukonceptz Krystal Cable, RF, and maybe the Tara labs cable that Nick Lemons reffered to. Any help in this would be nice, hope to order asap.

http://forum.elitecaraudio.com/showthread....18&pagenumber=1 (for those too lazy to click the link) Boys, Zed just informed me that he needs 50 buyers for each amps and the production will take place. Price for Kronos: $700 Price for Leviathan: $1200 Deposit: $350 and $600 respectively. Who's in? http://zedaudio.com/Products/New-Amplifiers.htm KRONOS: This is a 175w x 4 at 4 ohms or 350w x 4 at 2 ohms four channel amplifier. It has identical front panel features as Draconia. There are pairs of switches added to the rear panel which allow the pairs of channels to be switched into a high current mode. This will change the above specifications to 2 and 1 ohm respectively…

Alright, so i'm going to be ordering two 12" 2 ohm DVC RL-ps soon. Any suggestions on an amp to run them with? I would like to run them at around 700-800 watts each.