Amplifiers / Head Units / Processors / Electrical

Hi, I have juste received an aliante 12si and i'm trying to figure out what amp would cope with it. I don't want mono one but a 2channels... i have a ground zero 4125SQ for the front which is a Focal KRX3. But i'm trying to find other 4-6ch to compare them (Zapco DC, Zed, Mosconi, McIntosh,...) I'm just saying this because i'd like the "project" (not build yet) to stay aesthetic so i will probably stay in the same brand for he amps. Thanks for your help

I am going to run 2 Fully Loaded Btl 18" s dual 1ohm coils and I was wondering if anyone had some ideas for an amp or amps to run. electrical is upgraded and I was wanting to atleast give them a true 4k RMS. Also I am wanting to stay under $800. Thanks, Brock

I am looking for an amp between 150-200RMS x 2 at 4ohms for CDT ef-61 components. I am looking to spend under $200. Which of the following would you recomend? I am open to other recomendations. Thanks for the help. Power Acoustik OV2-820 http://www.poweracoustik.com/gothicseries.html 4 Ohm RMS: 180 x 2 Watts Kenwood KAC-7252 170W X 2 RMS (4 Ohms, <1% THD+N) MA AUDIO HK798 http://www.maaudio.com/productview.cfm?pid=2369228 2 x 200W RMS @ 4 Ohm Profile AP1200 http://www.profileusa.com/products_amps_ap.cfm RMS Output Power(4 Ohms)-200 Watts x 2

I was looking at the Alpine PDX 2.150 to run the Clarus 61-2 comps. I talked with Scott and he says that the PDX is not a really good SQ amp. He did mention the new JL HD amps. I'm looking for a amp like these that are small, don't get hot because it will be located in the cargo compartment in my Trailblazer.

Im debating on purchasing either the AQ2200D or the IA 20.1 amp to run a pair of ICON 10s. Which amp would you recommend? Which is better?

Im looking for an amp to push two ICON 10s. Im on a budget so I really dont want to spend more than $450. Any recommendations would be appreciated.

This is my first build so I only know what I have researched, I will be buying a Fi BL 12 subwoofer to put in my Ford Ranger XLT. I am not sure what amp to buy and please no used ones.

I ordered an Fi Q15 with BP Power option. Would a Sundown Audio SAE-1000D be a good match for this sub?

Amp for Hybrid Audio L61-2 set? L6 - 4 ohms; L1 - 8 ohms L1 max : 100w L6 max : 250w

I am gonna be running 2 sets of kicker ks 6.5 component sets,i believe they are 100 watts rms.i am looking for a decent amp to run them,my budget is up to about 200$.any suggestions?

http://www.soundsolutionsaudio.com/store/products/Incriminator-Audio-I-Series-6.5%22-Components.html So I bought a set of these. Just wondering what peoples opinions would be on a amp thats roughly 75x2 (figured that cus it seems like it'd be more common that 85x2). Size isn't really a problem. Looking to spend 50-100$. Know thats not that much but really just want something better than running them off the head unit. So what do you guys think?

Ok here we i just bought the mach5 6.5 i bought a saz 3000 and a 18btl with an enclosure design by hexibase. Now my question is what would be a good amp to push the 6.5 i know the saz 100.4 but my budget is getting low so any other sugestion thanks.

I don't know a ton about car audio and was wondering if maybe someone could recommend an Amp for the Mag 15" that I just purchased

I need to pick out an amp for my front stage. As of right now the vehicle is bone stock..I've purchased a set of 6.5 components (fosgate power t1's). I plan to run them using the supplied passive crossovers in stock locations. Have no plans to run an active setup anytime soon but who knows what will happen in the future. I would like to spend under $250 but could possibly spend more if there is a good reason too. Looking for about 100x4 @ 4ohms and bridgable. I have a MB quart dsc4125 in another vehicle and its OK but want something else for this vehicle. What's out there that's worth a crap?

Im looking @ getting a amp for my SE and dont know which way to go. Im kinda on a budget but im open to all ideas. Want to feed it as close to 600 rms as i can. off topic: Hi to all, im new here

Sup guys quick question, What do you think would be the best amp to accommodate a sundown audio sa8. The sub would be in a ported enclosure around .8 cubic ft tuned about 31-32 hz. I want use for daily driver not spl. I know it's rated at 400rms but do you guys think it can handle more? For amps I like rf kicker jl I've owned all three, never had problems. It's just very hard to choose the correct amp. Usually I have the same brand for both sub and aml but sundown doesn't have a amp around 400rms (at least not in my price range) I mean I wouldn't wanna spend the extra dollars for something like sae1000. Sure there will be headroom but I don't plan on upgrading this is g…

i havnt bought the subs so it can be either for a dual 1 or dual 2? they rms 2000 each so something around that was looking to spend about $1000 for amp would be better if its like $750 but dont think thats possible for a good new amp. thank you in advance

I think im leaning towards two level 4XL 15's whats a good amp to push those animals? I want something between $550-$650

Trying to decide on an amp for 2 RE audio SR10s. They're rated at about 350rms. Each will be going in a .88 ft^3 ported enclosure. Trying to stay under $350. Alpine pdx 1.600 Kicker zx750.1 Cadence DCA-1000 Haven't ordered subs yet so any wiring configuration is an options. And i'm open to any other options or suggestions.(except something directly available from the manufacturer. This is replacing stolen equipment so I'm dealing with AJRS, awesome company btw.) Thanks

I have decided to get 2 10 inch FI SSD subs for my Toyo Camry. Im looking for a cost effective amp to push them close to there rms. I see it is rated 1000w rms but if I can save a few bucks and only get about 600w-800w to each I'd be happy

what would be a good choice for an amp for type r. im not to sure what im going to go with yet. either two 12"s or one 15". any suggestions? thanks.

I need a amp for a set of alpine type r component speakers price not a factor, someone please point me to the right amp.

Hey i have a xcon 10 in my trailblazer and i am looking to put more power to it. I am currently running a cadence a7hc but the sub can handle a lot more power and i would like to be louder. I have it in a 1.1 box at 35 hz. I guess i need 1800-2000+ watts and would like to keep it under 400. Any ideas on a good amp?

Ok so I tried using the search engine (not working for me). But what is the specific duty of the gain on the amp? How should I adjust it? I heard I am supposed to match the volts with my head unit preout volts? I bump the system daily. Also if you need more info on my setup its in my sig.

At one point in time there was a link to a calculator someone had made to just plug in your rms and impedance and get what the voltage ac you should see when setting the gain on your amp. anybody know where that is i wanna bookmark it to my computer. and yes i have already read the sticky on how to set gain. im just trying to get this as a bookmark. thanks