Amplifiers / Head Units / Processors / Electrical

ive been told that this is a good amp for the money im not sure if this has been posted yet or not haven't seen it. but i here its just about the same as the saz 3000d but cheaper. ive called the place and they said a couple people that have fi subs bought this amp and have good reviews on it. i mean the amp looks good he told me its just as the saz 3000d they don't believe in charging a lot of money on their amps it comes with a two year warranty whether i have it or i give it to someone else i just wanna know if anybody here has had any experience with it personally?? thank you Crescendo Audio :: Amplifers :: 3KWP Monoblock Amplifier

I've seen that some amps have a wired remote controller and my question is what does it do. Does it control the gain or bass boost because both of these are controlled by knobs on the amp so whats the point of having the remote? I don't know if this was posted before but i couldn't find anything on it.

Woot. Tight effin fit. I had t spend soem time on the grinder with the brackets so they wouldnt touch my external rectifers and it was supposed to be a drop in but I had to reclock it. new oem deka up fromt

Hey guys could someone help me as to how to go about setting the bass boost on my amplifer? Is it bad to use it? SAZ-3000D

i was woundering if you guys can give me some input will i tell a difference between using 12 gauge or 8 gauge for wireing my sub to my amp i have a 12" btl w/cooling daily d2ohm ans i got a saz 2000d going to wire it down to one ohm wow just realized i cant spell !!

I'm looking for an aftermarket processor for my factory system. I've been looking at the JL Clean sweep, MTX Bass ResQ, RF 360.2, and finally the AudioControl. I need a Processor that can handle possibly active set up, 2-4 Channels for mids and highs and lastly a subwoofer output. I like the Clean sweep and 360.2 so i can get a good feel for automatically Eqing ( I know it's not the best but it's a start ). The car is a 2011 Ford mustang With factory everything and stock system. The speakers I will be using are the Bravox CF 6.5's, the amps will probably either be Stetsom or Sundown audio, my budget is at most 600. Essentially i'm looking for the best bang for the buck, E…

I am currently on my third high output alternator in this car. Both my yellow top under the hood and xp3000 in the trunk have been tested for bad cells etc. they are each fine. There is no indication of belt slip occurring whatsoever not even silent. Big three upgrade is in place. The alt charges perfectly fine for a week or so then just stops putting out amperage as if its a regulator gone bad or rectifier bridge that's somehow over worked itself. Besides mounting it there is a run of positive to the battery from the charging stud and a one-wire charge lead that I splice into a 12v connection for the regulator to operate off of so I don't understand where the issue is co…

Could someone recommend a good amp for two SSA ICON 12's....please?

Memphis 1000.1 or a JL 1000.1 which is a better amp i was going with the JL

i was wondering if the audiopipe ap30001d can run at 1 ohm stable??

Hey People....I will soon be the proud owner of the SAZ 1500D!! I am wanting to get your advice on how to properly power the amp. I currently have a car with the stock 105 amp alternator. I've done the BIG 3 with 4 gauge wire. I also have 4 gauge running to my trunk.....It then goes into a capicator and then to a distro block where I have it going to a 2 channel 300 Watt Denon amp and also what will now be the SAZ 1500D.....I'm pretty sure that I will be starving the amp for power....SO...My question is mainly budget related. How can I give the SAZ enough power the cheapest way??? Can I run another 8 guage power wire and just use it for my 2 channel and leave the 4 g…

Just wanted to hear everyones experience with the two companies. They both offer pretty much the same alternator for my car at the same price. I'm just trying to decide which to go with

Well it took me forever but i got my 250 amp Mechman alt in this weekend, had to get a different size belt to run it... well problem is my car is sitting at 11 - 11.3 volts!!!! even with the stock alt it would hit 14... i dropped a pretty penny on this, and its way worse than my stock. i have had the big 3 on for 6 months. is this bad for my car? i have a long road trip coming up ion a couple weeks and this needs to be fixed. whats my problem????

I don't want to use any of the wiring that comes from my truck. How would I run new wire and what wires would I have to include? I don't need speaker wires because my amp powers my speakers Head Unit is http://www.kenwoodusa.com/Car_Entertainment/In-Dash_CD_n_DVD_Receivers/1-DIN_CD_Receiver/KDC-MP342U Truck in sig.

Hey guys ok my situation is this i have replace my stock battery with a kinetik 2400 and i also have a 800 my lights still dim badly i am running a hifoniks brutus bxi 2608 im running the full 2600 on 1 ohm on my cascade designs omega 15. Since i have a dodge charger my batterys are in the trunk only and the stock cable going to the battery form the alt is i believe 2 awg i forget. my alt is 140 amps. and the cable going batt to batt is 1/0 and the ground is 1/0. my idea is this i will mount another kinetik hc800 under my hood right by the alternator and run 1/0 to it from the alt +. then run 1/0 off the + of the battery to the 2 batteries in the trunk will this solve m…

Lately more and more... its seems that my subs have been losing power. checked amp grounds, re-did em' and sanded well. tightend terminals on rear battery; a Kinetik 2400HC. still nothing... hard to explain, I think my kinetik is shot...but it really isnt that old, nor have I been that hard on it. to help; -230A alt. -yellow top up front - 1/0 wire under hood, and back to rear bat. with 300A breaker. - 1/0 to 300A breaker, to distro, to orion 2500d. it was loud a few weeks ago... so much, it blew the light off the ceiling, and a grill of of my MB Quart's of front in the doors.... it was kinda an of and on thing, so I thought it might be a bad ground/connection, but l…

The subs I'm most likely getting are the Mach 5 IXL-12.2.2...two of them, and they are only Dual 2. With the Orion, I'd need to run it @ 0.5 ohm. With the Directed, I can run it @ 2 ohm. With the Directed, it has to come across the border. Which would you get? I can get both for the same price, but the Directed has to come across the border..

I got a brand new aq1200d and after i wired everything up the amp has power and has plenty of it, getting almost 14 volts while the car is running, but there is no signal getting sent out from the amp. Ive tested it with a known good rca cable and even used an ipod to eliminate the head unit but still no sound. I don't know what to check now. The amp is not going into protected mode. Going to call audioque 2night after class and see if they have any input. any advise before i go crazy lol

I have 2 sets of re xxx 6.5 components ... i was thinking about going active but i do not know what the benefits would be and if it would be worth me spending the extra money for another amp ... would these speakers do well with an active setup? they are rated at 150 rms each (mid+twwet combined) ... how much power should i put to each mid and each tweeter? the ohm rating on the set is 2 ohm but will that change each speakers impedence?

it will be my first time buying a high output alternator what else would i need other than a deepcycle battery and voltmeter thank you

ok i got 2 RE HC' 12's, and im looking for opinions on amp(s) to get, so far denim has helped me out alot, he has recomended the following: 2 kx800.4 2 dei 1100 1 pg tantrum 1200.1 1 us amp 2000 and many more so what would you recommend. It dont have to be one of them can be anything. thanx, Rob

I will be running a 15" SI Mag in a 3.5cuft box tuned to 30hz and should be running a set of Hybrid Audio Technology Clarus C61-2 components. I'm trying to achieve a nice SQ oriented set-up that can still deliver a nice little kick. I have it narrowed to either: The Audison LRX 1.400 for the Mag and the Audison LRX 2.250 for the components. http://www.woofersetc.com/index.cfm?fuseac...Product_ID=4224 http://www.woofersetc.com/index.cfm?fuseac...Product_ID=4287 Or The Focal FP1.800 for the Mag and the Focal FP2.150 for the components. http://www.woofersetc.com/index.cfm?fuseac...Product_ID=4481 http://www.woofersetc.com/index.cfm?fuseac...Product_ID=4480 Can anyone help…

Hi Guys, I need a good head unit for spl, so what you got. I have a Alpine cda-7995 receiver rigth now, it is the one with no internal amplifier. It is good for SQ for sucks for SPL. So what will be a good head unit?

Looking for a new amp under 300$? Any good suggestions?

I was looking at ssa and found this amp the amp I was wondering what ya think about it