Amplifiers / Head Units / Processors / Electrical

Here's my dilema... I've got a few soundstream class a amps all of which are 2 channel amps with a seperate gain for each channel. I recently picked up a rubicon 555 5 channel amp and could use the 4 channels to run my front actively. I've got a class a 6.0 going to my fronts now. Would I really be able to tell the difference??? This is just for personal use and not competition.

I'm not familiar with them, I see some are JBL also. Someone has a reference 2x75rms that is pretty new and wondering if they suck, so on a scale of 1 to 10 how good are they? Or should I say scale of Pyramid power booster to McIntosh...lol. I just need in the middle or better.

Last time i knew the majority of JL Audio amps were made in China with the slash series being made in Korea has this changed? The reason is on another forum there are people that are convinced they are made in miramar florida.

I know that the older amps they made were amazing but I was wondering if any has tried their new amps and if they are high quality or not. Input would be much appreciated since I looking to purchase a new amp. Thanks in advance Sincerely, Matthew

A buddy had a Nitro 2000W Amp hooked up to 2 10 inch Rockford HX2's (2210 Model) and I sayed I dont even think those subs felt the amp at all but he says its 2-Ohm stable and so I looked up the AMP on E-Bay and u can grab this amp for about a 125.00 bucks w/shipping! I say its garbage! Anyone else had experience with this amp? Thanks

will a Planet Audio Ac4000.1d amp have enough power to power up An Fi Audio SSD 12 Subwoofer

Amp warranty at .5 ohms?

Are these any good? the amp I'm getting, an AQ2200d requires a 200 amp fuse, and im using 2/0 welding cable so i figure il ljust get five, best bang for my buck and in case any pop i'll have an extra http://cgi.ebay.com/Tsunami-200-Amp-ANL-Fu...bayphotohosting And for a fuse block/holder, should I use the typical screw down the cable, or should I get the ones that you use a wire terminal on each end and just touch the fuse together? Have any suggestions on some? I need 2 affordable ones, but 3 if they are REALLY affordable.. I'm not trying to cheap out, but I just don't think its necessary to spend 75$ on three fuses... (since I'm using 2/0 thats why I'm wondering becaus…

http://www.sonicelectronix.com/item_11795_...+KAC-9104D.html

I just got an ASI equalizer for 25$ from my friend. Is it a good processing unit? Anyone know any info about this company? Its the ASIPE 1 7 band equalizer.Here

It's an Atomic 3000.1 2 FI BLs @2ohms 1200 XS power battery in the rear 2 runs of 0 gauge wiring stock alternator/front battery Has been playing fine the past week or so, but as of yesterday, any time the volume gets turned up around halfway, nothing ridiculously maxed out, the subs make a funny noise and the amp goes into protection mode. I've already checked that the ground is good, no loose wires or anything touching metal, the usual routine checks.. Not sure if it is getting starved for power or what's wrong at all. I'm not 100% audio savey but I know bits and pieces here and there. The amp is an older model that was damaged when I bought it, but I sent it back to…

Just curious if the Atomic 5000.1 can do .5 ohms daily with the proper electrical and how much power it will put out at 13-14volts..

Atomic AT 1600.1D vs Sundown SAZ 1500D. In terms of quality, components used, heatsink which amp is better? I know they are both Zenon boards so the circuity looks identical but overall which has a heavier heatsink and is better? Thanks

im picking up 2 12 loaded btl's soon... i just got my atomic 5000.1d now im trying to work every thing out on power.....i need a little help. heres a little story for you lol first i was going to go with 2 13w7 and 2 1000/1v2 amps i bought the amps brand new.so then it was time for me to do the big 3. i bought a 180 amp alt put it in and did every thing i needed to do...when it was time for me to buy the subs...well i found some one on ebay selling 2 brand new 13w7's i was like.... ''damn very thing is going good for me'' i bought them for $816 and i got ripped off (it was a fake listing) it took some time but i got $750 back and i did not get any help throw paypal. i …

seen there was a guy with a blazer that had one and i got a blazer how bad does it draw current?how big of alt you got and batteries?

so... i was at BestBuy the other day. just looking. and came across the cda-117. ive always liked the look of the unit and the fact that it has 4v pre-outs... well, i looked at the price and it said $177 clearance. (this means once they are out... they're out) so get it while you can! i was like WHAT!?! so i bought it on an impulse buy. lol. its about #50 from Crutchfield. and lowest i can find is about @285 from an UN-authorized dealer. http://www.crutchfield.com/s_500CDA117/Alpine-CDA-117.html?search=cda-117&skipvs=T SO... if you guys are looking for a nice HU on the cheap, go snatch this up! i was honestly gonna buy the other 2 they had when i got my paycheck and r…

Whats up yall. Its been a while sence ive been around, but im back with another question... I got a sundown scv 4000d, got everything hooked up no problems. once i turn the key and let the power get to it, theres an audible click sound, almost a pop. Im wondering what it is. i did notice i hear the sound at the same time the blue power light comes on the amp, but i just want to be sure thats what it is. Thanks in advance!

i was adjusting things on my treo ssx250.2 amp and noticed their is an audible noise coming from the amp. sounded almost as if the internals were squeaking to the music. thing is i don't htink it' s the amp i replaced the treo temporally with a us amps amp and it did it also . i'v enever seen or heard this in the past anybody know what the problem could be?

hey guys im in the market for xover, whats everyones opinion on this $150 epicenter? i remember in my old system i had one i just cant remember if it was this model..but i loved it..

hey whats up im thinking about getting a complete audio control set-up has anyone used them how is good stuff, any pro's or cons id like to hear thanks

just looking to see if anyone has any hands-on with the 3.1 i jsut got one from a buddy perfect shape and i want to know if it will be worth it to use with my 2 sets of RF T162s 6.5 comps

i was looking at epicenters and crossovers and i ran across this model which i think may be what im looking for..it give me the capabilities of a crossover and it also gives me the bass control knob where i can raise and lower the bass from the drivers seat which is what i was wanting from the epicenter..what do you guys think? http://www.woofersetc.com/index.cfm?fuseac...Product_ID=1254

opinions?

Was wondering if anyone has one and how accurate is the db meter? Is it worth playing around with. I seen that they made a couple of different models with the spl meter.

Anyone use either of these to intigrate a system to their factory HU. I have a new truck (2004 FX4) and want to keep the factory indash 6 disk cd player but want to install my Arsenal 10 CDT comp set and ppi amps. I just don't think that the factory bass treble is going to cut it for tuning though. Any thoughts (hopefully from others with a similar situation) thanx in advance