Amplifiers / Head Units / Processors / Electrical

I will be installing this tomorrow.

im looking for mono, 1, 2, chanel amp that @ 4ohm is rated at 600x1 or 300x2 but i need TRU RMS @1,0.5,0.25 ohm to be 1200+ kinda like the saz1500d thanks God bless Samuel

I have a DD M3a and when I see set ups on youtube or forums they have 3k or 2.5k or 4500Ds I want to know if my amp is around the same as the ones they use. So my question is what is the DD M3a similar too in output, their site says 2200 at 1 ohm, but everyone says they are underrated and get to 5k at .5. And lets assume my electrical is good enough for a .5 load. What amps would be very similar? SAZ-3500D? DC 3.5k?

OK I got an LED rocker switch from O'reillys to turn h/u on and off on the powerwheels like an ignition. If I hook up the wire from my fuse block to the hot side and the load wire to either other post I get the led but no h/u. If I hook up all 3 posts (pos,load,neg) I blow a fuse as soon as I flip the switch. I don't know if running the red and yellow wire together causes to much draw, or if the ground isnt really a ground? But I'm confused and slightly annoyed...

So I download a lot of mixtapes from sites like DatPiff and so on. They sound alright. I DLed on my Game's old songs today and it was amazingly loud and clear, like hurting my ears while playing. Music usually doesn't get that loud in my ride. I believe there is too much variance in mp3s. I don't remember this with CDs. Always loud and clear. Anybody here still bump with CDs? And what are some good high quality strictly CD players, if you can still get them?

Got a 34/78 under the hood and a 9a31 in the trunk.. Do the batteries have to be unhooked for charging?

So i tried to play a youtube video and then one i recorded on the iphone. Neither worked. What could be wrong? I have the proper cable from pioneer. Its an Iphone 4 on iOS 5.0

when my car is on and my alternator charges the battery to whatever volts, do the max amp or watts have an effect on performance. or do these numbers only apply to when you play the stereo with the engine off? im thinking of getting more audio equipment and want to keep light dimming to a bare minimum. right now on jsut a 1200 watt amp for my sub and the stock JBL amp i only get .1-.2v voltage drops. i dont plan to upgrade the stock 80amp alternator anytime soon but am thinking of getting an XS or Kinetik under the hood since my interstate keeps losing its charge after about every 6 months give or take. also i have the big three done

So i just put a new battery on my wifes yukon like 6 months ago...and i turn it on now and the voltage drops very rapidly..i turn on just the switch with the truck off and the voltage goes from 12.3 down to 10.6v is it the battery or is my alternator not charging it right? Its the stock 160a alt...

I read around a bit and read a whole thread in here and went out and bought 35 feet of 3/0 for my car. This stuffs freakin huge. It looks like a black garden hose and makes my stinger expert look like a spaghetti noodle :-(

Howzit guys, Anyone have suggestions for a decently priced amp that does around 800watts at 2ohms? Its gonna be powering a single skar vvx-10 in a 1.5ft^3 ported box tuned around 32hz

I always hate these "either-or" scenarios but I'd like some ideas for 2,000 to just below 3,000rms. I'd like to run 2 10" SSA ICON's which run at 1250rms a piece ... The amplifier needs to run at 1ohm or above, not below. I have 2 JL 1000/1's I can run. Takes up a lot of room to run 2 but I know it will be stable power at 2,000rms. 100A Fuse Per Amplifier. To make things look nice, I'm considering selling the 2 amplifiers to buy a Rockford T2500-1bdCP - 2,500rms. 300A Fuse I just want someone to agree with me and say yes, you're nuts and go for it. OR Someone to say "No, don't do that, you have amazing amps already, RF is downgrading" etc etc ... It's hard to find this i…

I have all green led lights in my truck and i know that a lot of companys make amps with blue lighted logos but i want a green lighted logo. I need an amp that is 600 rms at 4 ohms. For my FI x12. Or if any one knows of one thats closer to 1000rms at 4 ohms but still cheap that would be great. I know my budget is really low but its about 150... Thanks for any help

Is it ok to mount the amps on the sub enclosure?

Is it ok to mount the amps on the sub enclosure?Why double post?

I'm helping a friend put together his system. This has to be such a rookie question but its something I've never had to deal with, all my systems I buy decks with enough RCA outputs. He refuses to spend money on a deck. He has a few laying around but only have 1 set of outputs on each deck. He plans to use 2 amps in his system (highs amp and sub amp) what's the best method to do this as far as running the rca's.

So does this really put out 600rms at 4 ohms? Or would i be better off with my power bass 400.2? Im hoping to sell my power bass to a friend and buy the ssl for $130 Coments Please!

would it be a benifit for to use a huge distro block to tie all my electrical together? heres what i need to tie in 6-8 runs from alternators 6 batteries and 8 runs to the amps. i cant use buss bars because of how my batteries are arranged. could i just route everything to a big block and run power from there to my amps? i may not have explained that well... it makes sence in my head.

music was playing then it stopped i go back and check everything and i notice this what cause this ???

I didn't know what category would fit sorry if this is in the wrong section. This guy on ebay is selling a skar audio sk 1500.1 for $61.00 shipped. Idk if its a scam or not, he claims he needs money for college. Should I jump on the deal? lol. http://www.ebay.com/itm/SKAR-Audio-SK-1500-1-Class-D-1680W-1-Ohm-Mono-Block-Amplifier-BRAND-NEW-/300674164552?pt=Car_Amplifiers&hash=item460193a748

ok im in for 2 sundown sa-8v2 i have a few ideas of the amp i want to run but i want to know some of your opions on which amp i should run?

I'm currently using a RF T600-4 to run my RF T1652-S door and rear deck speakers. I've started to notice when turning on my radio after the car has set for a while the front left speaker doesn't turn on until I turn the volume up a bit. Once it kicks on I can run forever at low or high volumes without it cutting out. Just wondering if anyone knows the internals in a amp that could cause this.

i email dc sound lab and they have been really slow at getting back with me. im looken for the price of one of their 2k amps. does any one know their prices?

I have a 1998 gmc jimmy. I have 2 sundown sa15's in the back with an mtx thunder 81001. Gets very loud only problem is when i turn it up to loud the battery dies. So i'm wondering what kind of battery i should get. Right now i'm looking at an optima yellow top but i'm always open to suggestions in the same price range. I do have the big 3 done, and the alternator is stock but i have no idea how big it is. Any help would be nice because this is a very annoying problem. Thanks!

Im gonan run 2 batts. Im gettign ready to pick them up in a few minutes here and wanna make sure I get the right ones. 34/78 under the hood and a 3100 in the rear?