Amplifiers / Head Units / Processors / Electrical

I just picked up a Alpine MRD-M1000 mono block for $100 today and need help setting it up. I downloaded the manual offline but its not very help full. Its pushing 2 Earthquake DBX10 in a ported box. Each dbx is in a 1.75cu.ft tuned at 33 hertz. Some of the setting I did today are: input 2ch gain +6db LPF 80 hertz SUB 25 hertz I have been looking online for answers but having a hard time finding anything helpful. Any help would be great, thanks.

hey guyz.. having a little problem with my 4200 avh pioneer. I pulled it out doing some little maitnence and then when i put the wire plug to the back of the deck and started it it wouldnt turn on. I drive a 06 escalade and i have to use a wire harness with a interface on it. so what i did was make sure nothing grounded and re connected the power ground and constant yellow and still nothing. then when i unplugged the interface and plugged back in it turned on for about 5 seconds and then shut off again. Could this be a bad interface? or what could it be? please help. thanks

I've seen several topics on this forum and other forums selling the Sundown 4500D for $900-1100 in just opened or unopened condition. Last I remember, they MSRPed for over $1800. I've been away from car audio for a while and I was wondering if there is a big scam out, or the 4500D just isn't what its crack up to be, or whats going on with that?

Finally listened to you all and got a cheap charger at Walmart, 6A charge maintainer, microprocessor controlled, 72W 6amp fast charge 4A medium and 2amp slow 6V/12V automatic. Hooked it up and let it sit over night. In the AM the remote unlock didnt work so I knew it wasnt charged. Looked at the charger and it said full charge. I unplugged it and tried to start it, dead. Reconnected, put back to fast charge, it started...the fan revved higher and higher then shut off. I unplugged and reset, put on slow charge, fan stayed low reve so I left it for 2 hours. Came back, said full charge, but was dead. Gonna take the cheapie back today

hey everyone, i am looking for a alternator for my 02' f150 5.4 v8. atleast 220amp output. i was at my local shop and he told me to check out power bastards alternators. i did and they have nothing but good reviews on them and there very good on price. my question is if anyone here has every used one before.. i really only have $325 to spend (and thats if and only if my alt. from my ranger ever sells..) i will have my AQ3500.1 running at 2 ohms (2600 watts) to a zcon 15 so i really only need around 2200 watts. i will have all 0 gauge wiring and as of now, no extra batteries. if anyone knows of a better deal on a alternator for the same amout of output or better. please lm…

Just placed my order for the 330 max 200+ at idle alternator that Mike Singer makes. Has anybody tried these out before? I'll be sure to post up a review when it comes in!

Audio Savings - Deal of the Day Nice little deal for a head unit!

The other day I was driving and I smelt a wire heating up and starting to burn so I turned the music down and then my sub stopped working. I assumed my ground was bad but none of my wires are melted, my amp isn't in protect mode, no blown fuses and the sub wasn't blown. I can't seem to locate the location of wires burning and need some suggestions of things to do. I have 1 12" Q @ 1 ohm with 1000 watt Brutus amp powering it all.

I am looking at these there.All three are around the same price. Going to be pushing a Dcon 10 in a sealed box.Seems like they all get some decent ratings.Not sure If would really need the power of the Brutus for the Dcon though. 1.Hifonics BRZ1200.1D 2.Alpine MRP-M650 3.Alpine MRP-M500

I would like to compare it against a new PPI class d 4 channel to see if all the time they spent on it produced results or just junk. I can't find squat for user reviews of the vlx4150

Is there really any advantage to running this amp on a sub. I know alot of sound quality guys love this amp to use on tweeters and mids. I was under the impression that once this amp pushes out a certain amount of watts it switches from class a mode to an a/b amp. The only advantage i see is that its stable down to .25 ohms. Anybody that knows about this amp please comment

So I’m in the process of upgrading my cars electrical system, I’ve just done the big 3 and would now like to move on to the alternator. One problem thou, i know nothing about them or what kind i would need. Any info on them would be greatly appreciated. I have two amplifiers one a Kicker ZX350.4 and the other a Hifonics Brutus BRZ2400.1D all together they = about 300 amps, idk if this info will help but here it is lol

i have a kenwood h.u. that ive had for about 2 years not sure the model name(can get if needed) but it has the 2 preouts in back and usb and aux in the front. I was playing my ipod yesterday and all of a sudden it just stopped , so i unplugged it and tried it again and all it says is reading . i have tried both my ipods and that is not the problem, the aux works fine . any suggestions on how or what i can do to fix it?

Alright iv ran into a bit of a problem. I have two amps one a Kicker ZX350.4 which accepts 8 AWG wire and the other a Hifonics Brutus BRZ2400.1D which accepts 1/0 AWG. Im runing 0 AWG wire from the battery to my trunk, i cant find a dist. block that will work with these wires. any ideas? Any help would be greatly appreciated.

Hey guys I'm upgrading my system and I'm buying a 12" Fi SSD. I have been researching amps but I'm not sure what to buy. I don't want to break the bank with this amp. What amp have would you guys recommend? By the way I need to be able to fit 0 gauge in it. Thanks in advance, Matt

http://www.parts-express.com/pe/pshowdetl.cfm?&Partnumber=263-683&scqty=10 Does anyone have experiance with these? And how secure are they? And is there anyone that makes buss bars on here. I think I remember someone a few years ago ofeering this service but I could be wrong.

i recently bought a fi bl 15 dual 1 ohm sub and in desperate need of an amp with 0 guage connectors

How would you figure this out? Ac/dc / ac/dc? Running a mmats D300hc in a 2 cu. Sealed enclosure. Not supposed to run the mmats below 1 for daily driving, so want to know how I'm doing so, is this the cheater amp its made to be? Drawing lots of current lol, voltage drop. Don't want to dmg the amp, rewiring it to 4 and making a larger ported I guess.

Hey guyz, i heard 2 pops about 2 seconds apart then hit play on my iphone and silence. Ive had 2 different amps on my door speakers. ONe was an alpline mrp300.4 or something like that and now i have phoenix gold octane 9.0.1. both are 5 channel and i used only the 4 channels for my door speakers. I have pioneer 5800mp headunit, the pico fuse is blown so i catch a goodbit of alt whine and noise. which leads me to think that has something to do with the amps blowing? Could that have an effect on the amp if the fuse is blown? I checked all fuses and connections. It wasnt playin music when it happened either, which is weird to me. Please help me fix what im doing wro…

I have an AudioQue 1200 running my single fully loaded 10" FI Q. Wednesday omw to school, my amp cut out. I took the inline fuse out (which looked perfectly fine) and replaced it (i use 100A fuses). Thankfully my amp started working again. Thursday omw to school same thing happened. my amp cut out. This fuse was definitely blown. I immediatly ordered a circuit breaker because I was tired of replacing the fuses (the audio shop where i got the stuff installed at charges me $5 for a fuse). I went to Advanced Auto Parts store and bought a 50A fuse hoping it will hold me untill i get my circuit breaker. When i put the fuse in the fuse holder, the power light on the bass…

So I plug in the ground and it fine. Then I plug in the power and it starts to fry. The same thing happens in vise versa. What could becausing this? He has a 99 camry, his amp is a Hifonics Titan 750.2.

I currently have a Kenwood KDC-248u head unit and I think I want to upgrade it to something a lot better. Not exactly sure what hu I want so I am looking for some suggestions. Budget is $400 but I definitely would like to get something cheaper if I can. Thanks -JP

Planet Audio AP3000D or Audiopipe 1800.1D? Specs on Planet Audio amp are higher than the Audiopipe. This is to push a 12" JL Audio w7. Any suggestions?

I have an Alpine headunit not sure of the model at the moment. I have all 4 ohm speakers hooked up rite now. If i were to hook up in exaple two 8 ohm speakers.. Would i mess up my headunit fom the diferent impeadences? Maybe a noobish question but i've never tried it. Thanks for the help.

So this may be a noob question but i need to learn car 08 grand prix gxp with mechman 270 2 xcon 12's in 4th order bandpass I can purchase two amps vibe blackbox bass 5 that put out (each amp) 1500rms @2ohms I can get both $750 total Or I can purchase one amp sundown 3500d that puts out 1750 rms @2ohms for $800 Would I benefit from getting the two amps and having one to each woofer or would the single amp be my best thing to do?