Amplifiers / Head Units / Processors / Electrical

Hey all, I'm looking for a 1.5 DIN bluetooth capable deck. I haven't been able to find anything online, my local shop said they have them but I would rather get a nice internet deal first. At this point I'm open to any company as long as it is a decent functioning deck and won't look bad in the truck. Thanks a lot for any info, -Rob

I was just wondering. How much or what differnce does the volt rating of a HU make? I know the higher the volt that comes out of the HU, the louder the music plays. But I will like to get a professional response out of this. I.E. If I had an ideal system, lets say one 5-channel amp with all aftermarket speakers and sub. Will the system sound louder if I had an HU with 5v rating, or one with an 8v rating? I'm assuming that the quality build of the HU overall will make the difference at the end. Because with personnal experience, I had an Eclipse HU, that was made in 99 or maybe 98 lol, but the volt rating was 5, thats why I picked it up, but later installed an sony HU, tha…

I found two mmats for sale on cl in my area guy wants 700.00 for them they are 1400.1 @1ohm. looked them up online really couldnt find any reviews on them. was woundering if anyone had any insight on these amps. Are the under rated, the reason i ask is i have two fi d2 fwfl bl 15s. would these be good amps to push these subs i figure to run one one each. Any help would be great. thanks doogie

Im looking into getting the 10" FI Bl sub fully loaded with a 1cuft (or maybe slightly bigger if i can) ported. Theres a site im sure a few of you guys have heard of that sells them refurbished. well anways. on this site they have the... SAE-1200Dv1 SAE-1200Dv2 SAZ-1500D ... these three are listed right now and im curious which one would fit me better. i dont want to run an extra battery if possible just due to the hassle. any help would be greatly appreciated!! Thanks!!

My buddy wants a cheap system installed in his car. He already has a deck and speakers, just wants a little amp and a little bit of bass. His HU in an intro line Pioneer, bout a year old. It doesn't have a seperate sub out, but only has one pair of outputs. I know he wont have subwoofer control, but could you hook up the one pair of line outs (front) to the sub amp? I don't really see any reason why not, I've just never had to think about it before. Always had 3 sets of outputs. I know its probably a stupid question, but any help would be appreciated. Thanks

Hey all. I'm at a loss right now. I'm preparing for a build replacing my subwoofer. I will be using around 2500 watts of bass plus 250 watts of highs. I'll have one battery, but I rarely play the system with the car off. Anyways... Nathan (from Excessive Amperage) seems like a great guy and super nice, but I'll be paying $25 more for 20A less. The Power Bastards alt is 220A and the Excessive alt is 200A. Any recommendations? Comments/experience on build quality? Both come with an overdrive pully and a one year warranty. Thanks.

Ok , This is the question at hand say someone is looking to sell a amp, what would be a fair price to ask for a Soundstream 500/1 rubicon old school blue case??? I ask cause I have been holding on to 3 of them for use. But have decided to see what they may be worth and move on.. Thanks for any replies in advance from the people of this great forum.... Hawk

H.U. >>>>>>>>>>>>Eclipse AV8533, installed ~ 2 months ago, new in box before that. I'm the original owner. Mid bass speakers>>>>Peerless sls (830946) 4 of them. Mid bass amp>>>>>> Sundown sax 125.2, installed ~ 2 months ago, I'm the original owner. A couple of days ago I thought I heard my midbass speakers fade out, then come back on in a second or two. I wasn't sure if I heard it or not, so I dismissed it. Today I got in my truck and got on the E-way (I'm 2 min. from the E-way) and my midbass speakers faded out again. I don't think this is a wiring issue, it happens like clockwork, they play for ~6 second…

I have a 110amp alternator and I hope to get a sundown 2500d amp. If I were to get http://www.soundsolutionsaudio.com/store/products/XS-Power-D6500-Battery.html would I get by? Im willing to get two of them if necessary. I have a 2011 Chevy Cruze and idk if there is any alternators on the market for this car. So would simply upgrading battery's allow me to run this amp fine?

I tried searching but couldnt find a definitive answer. If I wire three dual 4ohm subwoofers to my one ohm stable amp it will see a final ohm load of approximately 2.67ohms. Specs of my amp are as follows: 600@2 ohm and 1000@1 ohm. So at 2.67 the subs would see less than 600 watts right? I was hoping to get closer to the 1000 watts but Im not sure it will be possible. And to explain my situation a little, I got excited one night and order two 10" Black Fiday subs before I realized they were dual four ohms. Thanks for any help too.

This was all caused by a loose connection. I had a shunt in between the battery and the amp so I could watch the current draw at all times. The connection on the amp side of the shunt got a little loose, and well it pretty much melted the wire into one big strand. I didn't shoot a picture of the connection, but you could tell it got hot. I know that the piece looks like Solder, but I assure you 110% it was CCA KNU wire. This time I'll tighten it up a little more And I cut another 3/4 inch further, I don't know what temperature it got to, but it made it to whatever temperature turns a copper ring terminal black with green and white corrosion.

I have a 2005 Cadillac Escalade with Pioneer AVH-P4200 deck and need advice on the interface for the factory steering wheels controls. I purchased the ASWI-PS had Bestbuy install it and have had nothing but trouble with it. Can someone with some experience please recommend a different model? Thanks in advance

Please someone correct me if i am wrong, i am going to strap my Sundown Audio 3500Ds and this will be my first time strapping amps, so i need to see if i am thinking correctly. The Master amp gets the input from the head-unit and a mono RCA from "BR Out" connected. The Slave amp ONLY gets "BR In" connected from the Master amp, leave the Gain and other Filters on the Slave amp set to 0. Each amp gets its own remote wire coming from the head-unit. Each amp gets its own Power and Ground. Connect NEG terminals of both amps together using 8AWG wires Wire my subs like so; Then take the POS wire from my sub and put it in the Master amps (far left) positive terminal, then take t…

Checked under the hood today and saw this... So pissed. Looks like I won't have my truck for a day or two. Getting it towed to the dealership tomorrow. Hopefully they don't try to screw me, as they installed it in the first place...Wondering what's preventing it from happening again too... :suicide-santa: :suicide-santa:

I have an 06 KIA SPECTRA SX and it has an 80 amp alternator. I have a High Output alternator told by Dave DC Electric it is 160 amp but got it tested at the local alternator shop over here and they told me it does 150 amp but can pull up to 200 amp. I have noticed a lot of people have High Output alternators and two batteries. One up front and one in the rear for the audio system as they say. Why do they have two batteries and high output alternator if you doing a SQ build? Also anyone knows the magic formula on how to calculate how much amperage I need my alternator to be. Someone told me add all the amps that amplifiers combine and that is how much amperage you nee…

Gonna power a BTL N2. Opinions? Powered by a 200 amp alt and just 1 battery.

So the speakers I am getting are the Lanzar MX8124, I will be getting two pairs, but I need help choosing the right amp for them. Any help is greatly appreciated.

i was installing a voltmeter today and i ran a power wire for it from the front battery threw the firewall and up to around where my headunit is the wire was 8g so i just hooked everything up to see if it was working everything worked fine then i moved the headunit and that power wire touch the back off my headunit it sparked and now the hu wont work i dont know how that could break it it touched the part in the back that looks like a heat sink idk what that part is for its liek ridges any way it made this terrible smell so i guess its broke i didnt like that hu anyway it was a soundstream touch screen one so for my new hu im looking for one with just buttons and volume …

Is this a good hu for a system I got an aq2200 and btl n2 18 does anyone have one that could have some input or could anyone tell me the pros and cons.

I have been looking at 2 DIN head units on and off for a few months now. I will be using a external processor so on board processing is of no concern to me. My budget is flexible but I couldn't see spending over $600ish for a HU with the features I need. The features the HU must have are.. - IPod controls- MUST have a good ipod interface. - DVD - XM capability - USB port Other features that would be great to have are.. -SD card slot -Video out -Blue tooth The HU that has had my attention the most during my search is the Pioneer AVH-P4200DVD.The best price i have found is $330 new on Amazon. I already have a older Pioneer XM add on unit that was installed by the PO. The…

Sooo... I took advantage of the black today sale and I ordered a xcon18" D2. And I can either get the new sundown 1500D ($400 shipped NEW). Or find a new 2000D ($? Used/refurb). What would you recomend? (Based solely on either 250 over or under...) im not to worried about the little price difference if there is one. I think that im leaning towards the 2000d . Just because 250 more watts on a 1750watt sub doesn't seem like that much more. Problem is finding one. Db-r doesn't have any now. Will be ordering it in december some time. Just want opinions. I guess ill go ahead and let you guys know this is my very first system. And install of any kind(never have even installeda …

So I have had my 12" Icon all but a month now and I feel like its time to get it an amplifier that will make it happy. Right now it is being powered from a JL Audio 500/1 and it seems to take it with pleasure. So far it has made a great addition to my Toyota Camry. What I will be doing is upgrading the power for the Icon and re-doing the front stage hopefully in the spring. Basically in the end of my other thread I mentioned a particular amplifier I am interested in and was hoping to maybe get some suggestions along the same lines as that one. The particular amplifier in question is a Boston Acoustics GT-2300. Seems to fit my needs and then some. What I am looking for in…

how big of an alternator's ? how many batteries , etc etc , would i need to run 2 Saz-3500d's 'safely' on my truck? they would be @ 1 ohm , just for daily..

Hey all, So the other day i was listening to my music when all of a sudden, my FI Q starts starts going in on itself. It was playing a completely separate beat from the music and instead of flexing out, it was flexing in. I turned down the music but that did nothing, i turned down the remote gain but that did nothing so i ripped out the speaker cable from the amp to stop any further damage to the sub. The amp is a MTX JH1200. I'm only running 4 ga to it and I have the big three upgrade. I checked the fuse on the 0 ga running to the batt and it was blown so i will be replacing that shortly. The wiring on the sub is all right. so its the amp thats broken. The amp makes a c…

Would it be better to run 0 gauge from the ground of the amp straight to the negative terminal of the battery instead of hooking it to a bolt under a seat?