Home Audio

I am using a home amplifier than does not have filters in it. So what happens is it send the full frequency range to my subwoofer. It has been working that way for a very long time with no problem, but it's messing up my image. It's playing frequencies it is not suppose to and instead of only feeling the bass I can hear higher notes coming from it too, and that's annoying the least setting the stage in another direction. I know most of you won't approve this but I have the subwoofer at the left channel and the original speakers I bought with it, two of them for 4 ohm load, at the right channel. The speakers are positioned fairly good and If I play only them there is no do…

This is a two story house, so we thought the plastic conduit would be the best route to hide the wires. Here is where we are at so far with it....

OK guys, need osme help. I plan on eventually getting a pretty kick a$$ set up for the house. To help get me started, my dad graciously gave me a Toshiba 5 channel (plus subwoofer, so 6) home system...minus receiver. The receiver crapped out. I'd like to get a receiver for these speakers that will also be fine for when the time comes to get a nice pair of Klipsch or B&W's. This system looks identical to this: Except the center channel is rectangular instead of more square like the satelite speakers. Here the specs for the speakers: Satellite Speaker Center Speaker Passive Subwoofer Type: 2 Way 2 Speaker 2 Way 2 Speaker …

Alright, so I have been without any real tunes for quite a while lately and I think it is really starting to kill me. So starting this weekend I'm going to get the music on my Ext HD's straightened out and start this build... Zaph Audio - Slimline Wall Mounted Speaker - Part 1 Zaph Audio - Slimline Wall Mounted Speaker - Part 2 To power it I will be using a reciever off an old "surround" setup that I have. Plans are to also add 1 (maybe 2) MLI-65's for sub duty probably up to 80-90Hz ish (Sorry Sean). First Questions.... Where do I order parts for the crossover? Want to order them and the speakers as soon as possible with hopes of it getting in by this weekend. I know th…

so i bought a big ass shed, something i have always wanted, half of it is my "home gym" and the other half is my work shop , my first though for music was to do a standard audio receiver , but after looking around on parts express im thiking hell why not do something small compact and different . goals, good full sound,stereo with a sub, bluetooth would be cool but not a must. i was looking at the new Lepai LP-2020TI but the Lepai LP-168HA 2.1 has a sub channel if i run the LP 168HA am i lookiing a running an inline passive cross over of sorts>?

Here is my 720 rms Sony sound system in action. The volume is on 10 of 30 so it can get much louder than what the video shows, this is just a quick over view of the system.

I am looking for an amp for my room, a 5.1 amp/receiver, with a sub rca out for sure. I don't need a huge amount of sq, i just require it to sound good enough for a party, i.e. doesnt clip out at medium volumes up. I need it to get loud. My franken speakers are odd, in the sense that they take power very well, and sound much better than i think they should for $20 walmart speakers. I'd post a pic, but I don't feel like getting laughed at anymore. I don't care about it doing rated power (ie a pyle pro can claim 2,000w, but put out 800w), i just need at least a solid 75-125w per channel, actual output. EQ would be a cool option, not necessary. Budget is $200. Alternativel…

How much of a difference is designing a home audio sub enclosure than a ported car enclosure ... Never built a home sub box befor only car... Any info?

So here's the deal, my roomates and I host get togethers at out apartment a lot and what we are really lacking is a a stereo in our downtairs kitchen/living room area and thats where we do most of out partying. In the coming month or so, we are going to construct a bar and I am planning on integrating the sound system into the bar. I want to keep as much space as possible underneath so I do not want to construct enclosures within the front of the bar, rather I'd like to have an open baffle type of alignment. The goals are to have it be somewhat efficient and party proof. By party proof I mean I want it to take abuse. I was thinking multiple 6.5" or 8" woofers on ea…

Consists of a 12" Dayton Titanic mk III and a Dayton HPSA500 for power. Box will be around 3.5 cubes tuned to 25 Hz with 3 4" aero ports. Should sound pretty good hopefully. I will try to get some pics of the build but in the mean time, thoughts/input?

Due to the purchase of my first real TV, I am venturing into digital to digital signal. The TV has no RCA outs, so my Dayton 2.1 plate amp couldn't directly mate up with my TV. With some help of Neal and SDY, there was an option for a converter or amp replacement. Due to potential latency issues with the signal conversion and possible effect on the quality of the sound, I opted for a new little amp. So I just ordered the SMSL Q5 PRO as it has optical in, a remote, and RCA out. https://www.parts-express.com/smsl-q5-pro-stereo-amplifier-usb-optical-coaxial-dac-with-subwoofer-output-2x40w--230-210 This gives me the ability to still use the plate amp for just subwo…

Looking for a nice little setup for a cousins patio. I have never done anything like this, so looking for suggestions. Needing a receiver and 4 speakers that are not flush mounted. Prefer to order from PartsExpress, but not limited to that. Price range of 4-600 bucks. Shop for me fellas!

Here is a little list of the equipment I am looking at getting. Reciever: Yamaha Rx-v661 Dvd: Yamaha DVD-C750 Speakers: 3 pairs of Axiom Audio M3v2 bookshelves Axiom Audio Vp-100v2 center Substage Amp: Behringer EP2500 The woofer(s) is still undecided, but that is ok, because this will be next years project. Leaning towards a single TC sounds 3000 (15") or a Fi Q (18")

Without sounding like a complete douche and "Oh, I have so much audio equipment ..." I think everyone knows there's a lot of good pieces out there on the used market. I've got JL w7's and my share of 4-channel amplifiers. My question is about the w7, but any car audio equipment for that matter ... I know next to nothing about home audio, other than I like it and I'm sure I'll go down this route as I get older (mature / family). In this situation, is it worth holding onto these pieces and trying to make something of it? Or just go on as I would and purchase proper home audio pieces when the time comes? The only reason I ask is it would be silly to spend $500 on a 300w h…

I bought a pair of the 1000w Parts Express sub amps and posted some pictures of the guts on Forceaudio if anyone wants to see what they look like before taking the plunge. Enjoy..... http://www.forceaudio.com/showthread.php?p=3404#post3404

So guys, i'm frustrated with my system to a certain degree, i currently have my mains as a cerwin vega e-312 pair...they're ok but the enclosure is mostly sub -tiny midrange and a tweeter. It feels like my entire ht is subsonic lol- coupled with the 2 15's subwoofers covering the lfe channel. I want more midrange and midbass particularly for music - i want to hear actual bass timbre from a guitar like a cab. I'm thinking about the eminence beta 8a's which are readily available in my country. I wanna pair em with a soft dome-dayton probably -crossed at 3k maybe. I'm not sure how to model this, I've thrown it into winisd and i'm not too sure if i trust it. But any enclosu…

Talk to me about the theory behind them. Designs etc... Would the mach 5 mli's be a good driver to use for a line array project. I'm curious and my room is rather short but lets say I have 6 feet to work with unless I built them for my living room. Which because of the layout would have to be a 2.1 system.

Hello all and thank you in advance for your help. This will be my first build and I'd like to build a new subwoofer for my home audio system. I'm flexible, but would like somewhere around 800-1000W to drive a 12" sub in a ported box, and to do this I plan to spend somewhere around $500 or so. I don't have a great idea of what a realistic budget is, so I'm flexible, just would like to keep costs down. I need some help figuring out where to start. Could someone please point me in the direction of some good resources regarding amplifier selection specifically? Thank you all. Quick edit: I'm using an optical connection from my computer to a Yamaha RX-V67…

Hey hows everybody doin? well I moved out and next year once im out of residence my parents decided they would give me the 7 year old 56" projection tv plus all the lazy boys in the house. I thought it would be genius to have a decent (awesome sounding first setup) setup. So what i have planned is mostly coming from partsexpress. The towers will be a MTM setup with 2 8" Dayton references (4ohm) and a Vifa D27TG-05 1" silk dome tweeter (8ohm). The crossovers are going to be the dayton 2 ways crossed over at 2kHz. The problems im having since im new to this is what should i set the crossover point to, i dont know how to build one so i have an option of 2 - 4.5kHz in 500Hz i…

looking to add a nice home theater setup along with a sub, im into good lows and very powerful bass in movies and music what would be a good driver+amp combo? im guessing i would have to buy a amp, no receiver would put out enough power i wouldn't think

i want to hook this up to my computer http://www.amazon.com/dp/B0002KVQBA/ref=asc_df_B0002KVQBA1401408?smid=ATVPDKIKX0DER&linkCode=asn&creative=395093&creativeASIN=B0002KVQBA&tag=cnet-3769-20

Is there any merit to this? http://shop.mapleshadestore.com/departments.asp?dept=96

Both are around .75ft^3 @ 35hz One has 1.25" Port The other has a 1" Port BOX 1: single sa8v2 @35Hz: Enclosure Specifications: Fb = 35.3 Hz Vb = 0.72 ft^3 External Height = 10 in External Width = 22 in External Depth = 12 in Port Width = 1 1/4 in BOX 2:

I have been reading, but still don't understand. Is there a difference between home subwoofers and car subwoofers? Would i have a problem hooking up a Fi Q to a plate amp? And the speakers. Is it not possible to hook up lets say some JL ZR650-CSi speakers to a receiver. Would this not work?

I need a pre-amp and pretty quick. It doesn't need a phono stage, just a volume knob. Passive would be fine and perhaps even preferred. I don't plan on keeping it very long or if I do it will be relegated to office/bedroom/garage duty. Something that is already depreciated so I wouldn't lose on buying it would be perfect. So if anyone has any recommendations or anything for sale let me know. I am open to about anything. I would prefer to spend less than $300 but don't want something super disposable either. If there was a cheap solution, in particular that was portable that could be sweet too. The current application is just as a source (single) for the whole hou…