Ascendant Audio

Anyone know what would cause this, or is it just a bad surround?

Well its the title... Any info on what size boxes these new subs will like?

The - terminal on my xt-25 came completely out when i was disassembling my towers. Didnt have a problem with the + terminal or either on the other towers tweet. I wouldnt think it would be very difficult to pop the back cover off and re-solder it, but upon further inspection theres what looks to be little spots of ca preventing the back cover to come loose from the key-way...should i send it in? ..and is there any possibility i can get ahold of anymore 6.5"s, xt-25's, and these x-over parts anymore? thanks

I don't know if you guys lost the paypal invoice that I paid for the two XT25 tweet replacements or not. Lemme know where you stand; I sent an email to the contact email I had that now comes back with permanent fatal errors. I replied to the paypal invoice email with no response. I sent a pm to you here with no response yet. At least let me know you're working on it. I'd rather have the gear than file a paypal claim. thanks, doug blohm

i have been looking for an ascendant audio havoc 18 and i cannot find it. can anyone please tell me where i can order one? it would be deeply appreciated.

I just purchased a 12" Atlas and am looking for some suggestions on enclosures. I will be running just one 12" with 300w rms going to it. Any recommendations appreciated.

Will the updated site be up soon.

I had to move the Vifa tweets up higher to get them more on axis, so I was stuck with a big hole in my new door pods. No way I was doing them again, so I came up with a pretty simple idea that looks pretty decent. More importantly the sound is WAY better now, which was the #1 goal. Pass side tweeter in it's new home. Whipped up some simple PVC angle mounts wrapped in gray carpet. $1.50 and about 30 minutes of time. Hard to make a large format tweeter look "good" in a car, but this will have to do. Close up of the driver's side panel. Fire up the "bat signal" and the caped crusader of midrange appears!!! Went with the blue theme to match my old eXcelon. Takes about 5 …

I got an AA Arsenal as my first piece of good equipment last year. Hooked it up to an 1100d in a sealed box. Played and LOVED it. Until one day the output dropped considerably and i got out, the surround had torn 1/4 around the subs outer edge. I was upset, i blamed manufacterer error. I sent the sub in, Chad didn't beleive it was workmanship error. pulled the cone out and the coil was black. I was clipping the amp, very common mistake. although i was convinced i wasn't clipping, i sucked it up and accepted the truth. But despite my stupidity. Chad, being the superhero that he is sent me another sub. I couldnt be more thankful. I bot 2 12" assasins from him at that …

I have an 18" Avalanche that i bought about 1.5 yrs ago. Was wondering how much it would cost to get it reconed. Had it in a 13cu.ft box tuned to 30hz with 1200RMS and i loved it, but i assume it took all it could and is now making a scratching sound when i turn it up.

I know the arsenals are finally up on the shop's page, but they are still missing the specs. I read they are rated at 500 wrms, but what is the suggested max for them. Also, I may have missed it in another post, but I don't remember seeing what their mounting depth is for the 10 and 12. I'm hoping that its 6.5" or less, I'd like to have another AA sub back in my Sonoma by the fall.

Well I'm really aching to get some new subs, well really a new entire set up but at the moment only subs. Currently I have a 12" cvr and I'm really dissapointed in it. It probably has to do a lot witht the enclosure but I really didnt feel like trying to make a new one for it. As always money plays a mojor role in my decisions and I"m kinda torn between (2) 12 Assassins and (1) 12 Q. I have really been wanting to buy the Q, but one of the things holding me back is the amp. I really cant afford to buy both an amp and a sub. I will most likely be using the amp i currently have pushing my cvr. It's nothign spectacular, not even great, but it works. Its a performance…

What is the weight of the 18'' Havoc? And will it bang harder then the fi 18''Q's?

I found this spot to experiment with Baffle building Baffle install Black paint Assasins installed Completed IB This setup consists of 4 12" Assasins, a parts express 1000 watt plate amp, and behringer feedback destroyer... It hits relatively hard and clean however my crappy drop ceilings vibrate uncontrollably which ruins it for me. I went with a different route with the assasins, 8 cubes sealed, sounds so much better to me. I can post pics of the sealed box if anyone wants to see. This is my basement, I'm gonna try another IB in the living room upstairs with some Mark I Brahma 12"s soon.

new SRT-8 jeep Headunit Pioneer Avic Z2 Amps (1) Kicker SX700.4 (mids&highs) (2) Kicker SX1250.1 (subs) Speakers Front - DLS Iridium 6.3 (3 ways) rear - DLS iridium 6.2 (2 ways) Subs - (8) 10" Ascendent Audio Arsenals( 8-10 cubes tunned to 32hz) will have pics up in the next week I cant wait to get the jeep back from Shawn this sunday, and thanks to Scott for a badass Sub...(hopefully )

Well, I feel like a moron. I was messing around today, doing nothing extremely stupid, and turned a 30 hz sine wave up a bit and the bass stopped. These are the Havoc 18 pre production subs. Only one is pwned. Both coils are gone, and there seems to have been a joint failure at the spider/coil/cone connection. Needless to say, my heart was broken when this happened because I love these subs so much. How much am I looking at for a recone? Certain people's inboxes were full when I tried to send this via pm.

Where would the new 18'' havocs be if they where in the Fi audio line?

Real Quick...Whick dust cover will the Arsenals have......the Havoc or the Assasins? The Havoc ones' are dead sexy.

Upgraded Assassin Series with the cast basket, reworked motor, and beefier coil. 250W RMS 16mm Xmax 8", 10", and 12" sizes Aresenal Series with upgraded triple stack motor and heavier aluminum coil. 500W RMS 19mm Xmax 10", 12", and 15" sizes Havoc Series with upgraded triple stack motor and long aluminum coil. 1250W RMS 30mm Xmax 12", 15", and 18" sizes Angled shot of all three lines together to show motor sizing. More pics and specs shortly.... Thanks, Scott

Hey Im lookin to get a Comp set that I can bi-amp.. will you have some that I can do this with? Thanks Troy

Just wondering if the new 10" Assassin will come in either of the above flavors. Need it for compatibility issues in my setup. Thanks!

Assassin 8: $99 Assassin 10: $109 Assassin 12: $119 Arsenal 10: $165 Arsenal 12: $175 Arsenal 15: $195 Havoc 12: $319 Havoc 15: $339 Havoc 18: $369 Andrew edited (prices) by: ssaudio

i have two assasin 8`s in a sealed box . what kind of amp would u recomend? fosgate 600.1 d or something. thank for any info.

whats the inches on the voice coils of each line mostly the arsenals is it 2.5" 3" or 4"