Ascendant Audio

I have an 18" Avalanche that i bought about 1.5 yrs ago. Was wondering how much it would cost to get it reconed. Had it in a 13cu.ft box tuned to 30hz with 1200RMS and i loved it, but i assume it took all it could and is now making a scratching sound when i turn it up.

I found this spot to experiment with Baffle building Baffle install Black paint Assasins installed Completed IB This setup consists of 4 12" Assasins, a parts express 1000 watt plate amp, and behringer feedback destroyer... It hits relatively hard and clean however my crappy drop ceilings vibrate uncontrollably which ruins it for me. I went with a different route with the assasins, 8 cubes sealed, sounds so much better to me. I can post pics of the sealed box if anyone wants to see. This is my basement, I'm gonna try another IB in the living room upstairs with some Mark I Brahma 12"s soon.

i have been looking for an ascendant audio havoc 18 and i cannot find it. can anyone please tell me where i can order one? it would be deeply appreciated.

Well, I feel like a moron. I was messing around today, doing nothing extremely stupid, and turned a 30 hz sine wave up a bit and the bass stopped. These are the Havoc 18 pre production subs. Only one is pwned. Both coils are gone, and there seems to have been a joint failure at the spider/coil/cone connection. Needless to say, my heart was broken when this happened because I love these subs so much. How much am I looking at for a recone? Certain people's inboxes were full when I tried to send this via pm.

Well I'm really aching to get some new subs, well really a new entire set up but at the moment only subs. Currently I have a 12" cvr and I'm really dissapointed in it. It probably has to do a lot witht the enclosure but I really didnt feel like trying to make a new one for it. As always money plays a mojor role in my decisions and I"m kinda torn between (2) 12 Assassins and (1) 12 Q. I have really been wanting to buy the Q, but one of the things holding me back is the amp. I really cant afford to buy both an amp and a sub. I will most likely be using the amp i currently have pushing my cvr. It's nothign spectacular, not even great, but it works. Its a performance…

I know the arsenals are finally up on the shop's page, but they are still missing the specs. I read they are rated at 500 wrms, but what is the suggested max for them. Also, I may have missed it in another post, but I don't remember seeing what their mounting depth is for the 10 and 12. I'm hoping that its 6.5" or less, I'd like to have another AA sub back in my Sonoma by the fall.

new SRT-8 jeep Headunit Pioneer Avic Z2 Amps (1) Kicker SX700.4 (mids&highs) (2) Kicker SX1250.1 (subs) Speakers Front - DLS Iridium 6.3 (3 ways) rear - DLS iridium 6.2 (2 ways) Subs - (8) 10" Ascendent Audio Arsenals( 8-10 cubes tunned to 32hz) will have pics up in the next week I cant wait to get the jeep back from Shawn this sunday, and thanks to Scott for a badass Sub...(hopefully )

Just wondering if the new 10" Assassin will come in either of the above flavors. Need it for compatibility issues in my setup. Thanks!

Well its the title... Any info on what size boxes these new subs will like?

whats the inches on the voice coils of each line mostly the arsenals is it 2.5" 3" or 4"

Where would the new 18'' havocs be if they where in the Fi audio line?

when will the arsenals go on sale i dont want to be caught off guard can i get a email when they do. [email protected]

Real Quick...Whick dust cover will the Arsenals have......the Havoc or the Assasins? The Havoc ones' are dead sexy.

I need the logo to put on a T-shirt. Id like to have the one thats on the website, the one where the logo is above the lettering. Thanks guys.

i have two assasin 8`s in a sealed box . what kind of amp would u recomend? fosgate 600.1 d or something. thank for any info.

Hey Im lookin to get a Comp set that I can bi-amp.. will you have some that I can do this with? Thanks Troy

Assassin 8: $99 Assassin 10: $109 Assassin 12: $119 Arsenal 10: $165 Arsenal 12: $175 Arsenal 15: $195 Havoc 12: $319 Havoc 15: $339 Havoc 18: $369 Andrew edited (prices) by: ssaudio

I'm a soon-to-be Ava18 user. However, I'd like to get the cabinet started before the driver arrives, so I can plug, play, and grin. So if someone could confirm the dimensions I have, and fill in the ones I'm missing, I'd appreciate it. OD (with gasket): 18.5" OD (sans gasket): ??? ID (cutout): 16.75" (edit) Height of driver lip (with gasket): ??? Height of driver lip (sans gasket): ??? Also, assuming the driver is recessed by .75" (mounted on the inner layer of a double baffle) how much clearance should I leave for the grille? (I plan to adopt a cat after I move, so I think a grille will be necessary to make sure that no claws touch the surround.) As for how I'll use it, …

The - terminal on my xt-25 came completely out when i was disassembling my towers. Didnt have a problem with the + terminal or either on the other towers tweet. I wouldnt think it would be very difficult to pop the back cover off and re-solder it, but upon further inspection theres what looks to be little spots of ca preventing the back cover to come loose from the key-way...should i send it in? ..and is there any possibility i can get ahold of anymore 6.5"s, xt-25's, and these x-over parts anymore? thanks

I'm almost ashamed to post the "before" pic, but I'm more into function than form and the sweet sounds of the poly mids/Vifa tweeter combo made up for it. Aluminum panel is to plug the hole left by my old JBL comps. Not the worst I've ever seen, but pretty unsightly. There's another mid behind the stock grill. I had planned on doing some fiberglass pods, but don't really care for the look of them. Too custom or whatever, just wasn't my thing. Here's what I started with:

I am currently running a single Dayton Titanic 15" for my HT's low end. I would like to get some input on which line would work best. I would love to sport some AA in the house. The 15" is currently in a 3cf sealed enclosure. After sub, bracing, and amp displacement, I would estimate internal airspace at 2.5cf. I want to increase efficiency as well as increase displacement w/o sacrificing the lower frequencies. I know a new box is in order. I have quite a bit of room to work with in the living room. I was thinking 4 15" drivers sealed. But I may be dreaming. The current sub integrates very well with the front L/R/C channels I have. I guess I just want a bit more output. C…

edit denim: please don't the main sections for item sales, we have a classified section for that which you can use after 25 posts.

I checked the stcky and noticed a mention of the Mids and if any upgrades were apparent. Saw the picture of an AA mid with a carbon fiber/metal cone. Im really curious about how this product is going to be handled. I currently have some AA mids in my front doors and am very happy, and just came to the realization that i may not be able to purchase anymore! 1. Are they still gonna be offered? 2. Are they gonna be improved, and by how much? 3. Can we expect the same awesome performance and price? Any information will be greatly appreciated! BTW the new product line looks really awesome, especially those Havoks.

Upgraded Assassin Series with the cast basket, reworked motor, and beefier coil. 250W RMS 16mm Xmax 8", 10", and 12" sizes Aresenal Series with upgraded triple stack motor and heavier aluminum coil. 500W RMS 19mm Xmax 10", 12", and 15" sizes Havoc Series with upgraded triple stack motor and long aluminum coil. 1250W RMS 30mm Xmax 12", 15", and 18" sizes Angled shot of all three lines together to show motor sizing. More pics and specs shortly.... Thanks, Scott

Just curious?