Ascendant Audio

Its the only assassin sub with no depth listed on the website. Anybody have this info?

So I posted the question in the Fi forum but haven't gotten a full answer there. I had asked about woven tinsels on the Q and was wondering if this is a change that has been or will be done on the Havocs. I'll hopefully be picking on e up mid March or at tax time.

I've got two 10" assasins that were in a Wicked One. Needless to day, the wicked one gave great sound (SPL and SQ) but it is simply too big. I am looking for some ideas for a relatively small box. I have two ideas, simple ported or isobaric ported. The majority of the music will be heavy metal and country with the occasional rap song as well. It is going in a 2001 Grand Prix with Alpine Type S Co-Axils (40w per side) and stock rear speakers. The avalable space is: 13" Tall (wiggle room) 36" Wide 15" Deep They have a Hifonics ZX440 for power. This isnt going to compete and it doesnt need to impress, merely give the output in the range stated. This will be built by newyear…

Hey, I purchased two of them about a month ago, I am going to run 2 US AMPs MD2D to them. What I needed to know is, what should the box look like. Would anyone be willing to make me a blueprint:] I have them in a very poorly designed box. Here is a video: http://www.youtube.com/watch?v=ZRXJYl3ea3g Dont mind my harsh comment on the video:]

I need (2) avalanche 15d2 re cone's also (2) arsenal 15d4 re cones and i would like that to be more power handling in the arsenals Thanks

im still trying and it keeps popping up 1 item on paypal. where is the order number do i send it threw a message when sending the money

well i have the older model arsenal the 15inch i still have a warrenty on the two subs anyways everything checks out right the subs are reading 4ohms but the sub wont move the cone is locked up i dont get it

Hoping it to be central or northern california Also does anyone know out of all their lines which ones have motor widths of less than 6.75"?

I see that the efficiency of that sub is 89.9. Its one of the higher numbers ive seen. Is that good? I want to run a single 15" arsenal off a Kicker zx750.1. Is this too much power? I hear that this line of woofers are very underrated. Should I be fine with 750 watts? I want to first put it in a 2.4 cube sealed box to see how it sounds then I want to put it in ported 4 tuned to 30 like AA recommends. Any input is very much appreciated.

What subs would you guys recommend to run off my Rockford 2000?

Will someone Please PM me a price on some Havoc 12''s zip 36830

I'm just curious to what some have been metering with a 15" AA Havoc??? Anyone Anyone?

Aight... So I used to have a T1 15 and it hit lower songs (such as White Girl, Hood Figga, etc) with authority. I just hooked up my friend's Fi Q 15 up to my amp (exact same settings) and it hit those lows like my T1 used to... My problem is that when songs dip into about 29-31 htz, the sub starts moving VERY little and the sounds just kinda poofs. No real BOOM or loudness. Now this might be dependent upon the box. I tuned it to about 31-32 htz. I played tones and it moves the least at a 31 htz tone, so yeah. I realize that it moves less in this range b/c it is nearing the tuning freq and the sub's beginning to "unload." But why does the volume decrease so much? The box i…

Like the title says, what is the mounting depth of the 8" AA Assassin? *EDIT* NVM found the specs online.... Cutout diam. 7 1/4 Outer diam. 8 1/2 Mounting depth 5 1/8 Weight 13 pounds Fs 46.5 Hz Mms 80 g Vas 7.3 L Xmax 15.5 mm Qms 2.72 Spl 83.2 dB 1W/1M Voice Coil diam. 2 inch aluminum Qes .54 Znom 4 ohms BL 12.3 n/a Re 3.5 ohms Sd 187 cm2 Le 3 mH Rec. Power 150 W Voice coil Single 4 ohm Qts .45 Rms 350W Cone Paper pulp Car Application Assassin 8 Sealed CuFt =0.4 Ported CuFt= 0.6 Tuned @ 40hz

Srry for da bad camera what do I put in between the two youtube things to embed it?

I'm sure this has been posted but, what is the topology of this driver?

well like the title says im going to be getting two more arsenal 15's i have two already I AM A need help with box design the four will be going in a 4 door 96 tahoe. you dont have to tell me how they will sound i already know.

I know you guys do not check the forums very often, but I've sent a few emails and I know that you guys are super busy, so I just wanted to ask here of the off chance on of you checks it. I sent in my AA Havoc 15 to get repaired and got it back good as new (excellent service btw). But I was wondering if you could tell me exactly what went wrong with it, as we were never able to figure it out. Not just "mech issue" or "thermal issue," I am wondering what actually went wrong so I can make sure it doesn't happen again. Thanks for the great service and sub guys!

Does anybody have the original sealed enclosure size recommendation and the driver cutout diameter for the Avalanche 12"? I found the 15" and 18" info through search and on their archive website but can't find the 12" info. Thanks in advance!

who runs ascendant audio? and who do i talk to about sending back a sub from them.

I have an atlas 15 that needs a recone. Is it possible to get this done at all? I know they don't exist anymore, but is it possiible to fix? Thanks PS, this is funkypupsrule if you see this chad. LOL My buddy wants to pay to send it off and I'm going to give him the speaker.

I'm really don't know how to go about planning a subwoofer box from scratch. I used to start with the calculator for plans on subwoofertools.com, but that website just went poof. Now I don't know what to do... My dimensions are 17 high x 17 deep x 37 wide... tuning needs to be 33htz... I will add a second baffle and bracing, but we'll just used those dimensions for simplicity... If there is anyone out there than can help me I'd really appreciate it. Thanks.

Is the mayhem louder then the btl??? How much are the mayhems? And last do they have options like the btls?

I have a pair of AA Chaos 10's, in about 2.3 cubes net. I was wondering if one 4 inch Aero was enough. I may do dual 3 inch ports, but if I step up to 6 inch, it has to be longer than the box.

Just some fun..........still no alt