Ascendant Audio

Alright, here is my NEW setup that I will be planning. Two Twelve Inch AA Havocs, on a SAZ-3000D. Wired down to 1 ohm, so each sub will be getting 1500 watts rms. What would i need to tune the subs to ( I listen to mostly rap), What cubic feet for the box, and i would like to use tubes instead of a L or slot port. How many amp hours would i need to power the SAZ? I think im going with 120 amp hours, i have a stock 100 amp alt, big three with 0 gauge, and replacing front and throwing a powermaster in front and back. I have a RATHER large trunk, seeing how i have 95 Lumina there is already a 4.5 cubic foot box and its only taking up 1/2 of my trunk area i think i could fit…

hi my firends is trying to see which sub is better in ""SQL"" he is looking at an FI Q 15 and a AA havoc 15.. he wants to know which hits harder and which one has better sound quality...... and does anybody know how much a Havoc 15 would cost cuz i looked it up on their site and it does tell you how much

Currently have 1 12" havoc running on saz-1500s @ 1ohm, just wondering if saz-1500d have enough juice to push 2 of them (have stock Alt on my car + Big 3 and HC2000), if anyone have experience running 2 of them on that amp pls can you share with me, thanks

I need (2) avalanche 15d2 re cone's also (2) arsenal 15d4 re cones and i would like that to be more power handling in the arsenals Thanks

anyone ever did a ported box at about 3.0 cubes @30 hz for an avalanche 15? if so how does it perform? i have alot of power to throw at it so i can build a smaller box

Hey guys im just about to purchase a 12" AA Havoc sub. Just wondering how big i should make the box and what should i tune it to? I mainly listen to rap, hip hop, dnb, dubstep the sub will be powered off a SAZ-1000D Cheers.

I recently pulled a pair of my AA POLYS from one of my vehicles and wanted to build the AA TM Arbiter System. I already have the Vifa XT tweet from the kit. All I need is to build a cabinet and buy parts for the crossover. I have the cabinet dimensions and I was hoping that someone could give me a part list from Parts Express so I can get the project going. Thanks!

While we figured to have the sub ready to go by the end of Feb, we have ran into a couple of tooling and parts delays with the sub. Currently we are waiting for the latest material sample for the spider as well as a new lead with a completely different core and wrapping technique... not to mention that it appears that the spider spacing ring we tooled is MIA due to the injection molding company we are using in China seems to have gone under. This has put us in a bind for several other parts that we get through them as well and we are having some help in China in tracking down the tooling for these parts (shot in the dark). Ill keep the forum posted as to any updates on …

My friends who own Synergy Audio in Watertown SD said they emailed you guys or tried to contact you in some way a few months ago but they never got a message back. Maybe they had sent an email but it got lost over the internet, who knows. A lot of people are talking about Fi around here, and they sell DD. They are interested in finding out some information about your Ascendant Audio line, they may be interested in being a dealer for your product. They are doing some big things in south dakota, they are doing 159 in a blazer playing King Kong. With 4 9515's and 8 DD M3's at 0 gain. Plays any song people want to hear, and does great on Chopped music. I think a lot of …

Does anybody have the original sealed enclosure size recommendation and the driver cutout diameter for the Avalanche 12"? I found the 15" and 18" info through search and on their archive website but can't find the 12" info. Thanks in advance!

is there much difference in the low end? what about output? i hear only 2 DBs. true or not?

Still working on my AA Arbiter and needed help with my Precision Port tubes. The enclosure plans call for a 3" diameter and 5" length port. The enclosure is a 1.0 cu.ft. I have two questions..... 1. What is the tuning freq. of the enclosure 2. Are the dimensions for the port specifically for a Precision Port or is this for your regular 3" tube at 5" length. Reason I ask is because the Precision Port directions have different direction for tuning. I guess this is because of the flare on both sides. I really need some help with this. AA experts I need you. Thanks, Bob

Is the mayhem louder then the btl??? How much are the mayhems? And last do they have options like the btls?

Hi i looking to pick up a pair of 18 inch chaos subs, but im unsure where a local dealer is ... i live in scranton pa , 18504 can someone pm witha dealer location and price?

i'm from another forum and a guy is claiming that he bought 6 AA Arsenal 10"s for separate applications, and all suffered suspension problems.. he says the guy who built the boxes said i looking to find out if this is a known problem, or if the problem lies elsewhere.. thanks

OK... Thinking about gettting an 18" Havoc. I have been through a few different setups but still the one i miis most and compare everything to is my HDC315 setup a had a while back. Pretty simple as it was right when i started getting into car audio more. It was an HDC315 in a 4.5ft^3 box tuned to 42hz. running on a Planet Audio VX2200D at 1ohm with NO electrical upgrades, no rear deck proting, no sound deadenging etc... hit just under a 143dB. I have had a few different subs since including Atomic APX15, RE XXX, MTX RFL, Execution 15" etc... but nothing i thought was comparable really to the HDC315 as far as just plain hurting your entire body and making you want …

My buddy was telling me about a Ascendant Audio hummer last week? I was wondering if their is a Ascendant Audio loaded hummer? I thought i rembember seeing pictures of one somewhere awhile ago but can't seem to remember where at.

ive never heard of aa subs before till i heard the 8" assassins on youtube. i was impressed. i was wondering wat the 8's run for. and how good do they hold up? and where can i get sum if i decide that these r the ones. if i get 3 of them will a 1500.1 crunch amp power them pretty good. i looked em up and there rated at 250rms so i figured they can candle it. the one thing i like bout em is how low the sealed enclosure requirements r. thanks

I am considering a set of these to run in my front stage and have heard nothing but good about them, but haven't been able to find any specs. ESPECIALLY important is depth because i am working with limited room. If anyone know where i can get the specs or can post them up i would appreciate. thanks

anybody know where i can get a copy? thanks guys...

Hello, For nearly 3years now, I've been using the very first 18" hAvoc that was made. But, sadly, it died on me, well, there is a chance of resurrection, but I doubt it... After continuous playback(around 5 hours), thumping, at a party, it got super hot to the point where the basket was almost to hot to touch, and, dindt work anymore, obviously... My amplifier is a Crown XTi2000 (2krms@4ohm) and the enclosure is a 7.3NET @ 17hz (PR setup), mainly built for movies. So, now, I'm looking for something somehow, bulletproof. And I think the mayhem should not get hot with the power I got, even on long term playing periods. Also, with the sensivity so high it'll be louder with …

Just wondering what you guys are running to your assassins for daily. I know they are rated for 250rms but am wondering if anyone is running more than that to them.....if you are running more, how do the subs like it? thanks

Hi, After doing some thinking I've decided to go with my system on SQ. I have 15" Havoc in 3CF Net. box (running on SAZ1500D) and I want it to be faster and more accurate. Which box should I build ? Thanks.

does anyone know how hard it is to put together a crossover. i know the concept of a crossover and some components of it, but dont know if i want to take on the task im sure its easy for some. i talked to a dealer but i would want to have the components and not know how to put the crossover together.

Its the only assassin sub with no depth listed on the website. Anybody have this info?