General Fi

Havent bin on in awile and maybe I missed something about it but I seen that Nick isnt working for Fi anymore?

Hi guys, I want to share with you my future setup and wanted to know if the stock electrical will be able to handle it: I am brand new at this car audio business I crescendo 3500D at 2 ohm -- 1900 W continuous power 1 FI BTL N2 12 running at 2 ohm 1 4 channel JBL 100 W rms each channel 4 jbl 6.5 1 Pioneer 9400 Box tuned to 32 Hz (got the cut sheets from BTL forums) I will be doing the Big 3 I have a 2004 Accord with stock alternator approx. 100 Amps and yellow top optima Thanks guys

After waiting a little over a month I was excited when the shipping guy called and said my sub showed up. Then he said it felt funny so he opened it before the FedEx guy left. He said it looks like its ok but I'll take pics of how it came. Here are those pics. I was very disappointed when I saw it. It's like someone through it in a box and hoped for the best. I bought some closeout mids from parts Express that were $30 that was packaged much better. I understand that shipping companies can be rough, especially with heavy boxes but still. I'm lucky that there isn't any apparent damage other than a little chip on the magnet. I'lbbl know more in a couple days when I g…

I have tried to get ahold of someone from Fi since apiril i have recieved one email back asking if he had helped me yet at the beginning of june. I have sent email after email and i have yet to get a reponse since then. i need to order a recone for a 18" n3 7 spider with sp4 basket. i am hoping someone on here will be about to help me out, i wish i would of waited the extra months and got a normal basket so i could order recones normally. i would go ahead and order normal baskets with recones but pending 65$ a piece extra right now and having to buy 2 recones instead of one isnt an option. thanks -getloud

My new SP4 18 reads 2.2 ohm on both coils Fluke Dmm leads touched it reads 0.1 the Sub reads 2.3 ohm Craftsman DMM leads Touched it reads 0.0 the sub reads 2.2 Cheap harbor freight meter leads touched it reads 0.1 The sub reads 2.2 My other two SP4's Both read 1.4 ohm. I have been waiting on a response from FI Car audio. I Hope they come through and fix this. Anyone have this issue too?

Ok so today my dual 1 SSD 18 stopped working for seemingly no reason during very low volume music. The sub is not frozen. I checked the sub with a battery and it did nothing, checked all wires etc. etc. I will check the coils on my multimeter when I get to work tomorrow. The box is build to the specs of the sub 7cu.ft. @ 32hz. Powered with a Fosgate t1500-bd (2ohms and very conservative gain). The coils look normal to me, not black or even dark in any way. Sub doesn't and never did smell like burnt coils. I'm thinking the coil's glue failed. I'm stumped on this really as I've been good to this sub and only had it for a few months. I hope Fi will take care of me and warran…

NOTICE: For the next week, there is going to be a delay on calls and emails due to Shawn going into major leg surgery as I type this. For the past 2 weeks he has been answering as many emails and calls as he can from his hospital bed. Due to this life changing surgery, he will be unable to get to all the emails and calls for a few days, so those who are wondering what is going on, please be aware of this and take it into consideration. If you know Shawn at all, keep him in your thoughts while he goes through this. Thank you.

It's been about 2 weeks now and when I check the status, it still says being processed. How long should I be expecting to wait for this kit?

Just purchased a new in crate 18" btl with the ufo style motor.is there a way i can tell if it has the daily use or spl option?? The sub is EXTREMLY stiff.. I looked on the inside to see wat it said in maker on the former but all it said was dual 2 btl 18 fc. I hope its the daily lol im gona need to sell it if its the spl option unfortanantly.. any input would be greatly appreciated.thanks

I just looked at my woofers, and noticed the "Chrome Red Fi" is coming off the cone. It isn't peeling from the edge (like at tip of the F or I as if something peeled it back) It is coming from the middle part of the logo as it bends over the dust cap. It almost seems like the foil-ish vinyl is flexible enough to follow the curve of the dust cap? I think standard vinyl would have been fine? Anyway, anyone else have any issues like this? Is it possible to get replacement logo stickers for the dust caps?

Please check my mail and respond. Its the one that has been dragging for longer then I care to mention. Thanks

Hi all, I have built two 120 L cabinets two drivers per box in a dual opposed configuration (drivers facing out) I have been told that the std Qts drivers can sound peaky ? Can someone explains to me the term PEAKY. I have four Fi Q 15" first two orderd was dual 1 ohm but the second set I orderd later was dual 2 ohm so I will be having these changed back to dual 1 ohm as this suits my inuke amps. So it it worth having all my drivers changed to High Qts or is there not much difference between them ?? Thanks for any input

ordered on may 1st im just curious if my subs are getting close to ready i dont wanna rush no one just asking

I'd like to get two fi bl 15s. But I don't know what options to get on them. Also have no idea on what amp to choose either. Going in a 2003 chevy trailblazer ls

I purchased a 15" Q back in 2009 and the cooling portion "blew" out of the sub, cracking/destroying the dustcap in the process. I have repaired the sub but still need a dustcap! Any help? I have tried to order one on the website but cannot find an option to do so... thanks for any help guys.

just kidding. but since your here... what are some good brands of speakers for my lade (escalade) (6 1/2 inch) also getting fi btl 18''

Hi, I have a strange issue that seems to be getting worse. Ill start from when I think it happened. My friend and I built a 4CF box for 2 FI SSD tuned to 30HZ. When we put the box in my cobalt I noticed that the wire terminals were upside down. I didnt care at the time I was just wanted it done for the time being. This was back in 2010. A few weeks later I decided to have my other buddy help me remove the box and put it in the right way.and reposition the subwoofers so that the labels looked the right way. When I was reorienting the subs I unhooked one completly to show my buddy,turns out when I hooked it up I wired the coils out of phase. I didnt know until I was on my w…

would this work, a Hifonics Brutus bxi 2000w with a 18 inch btl n2? what would the ohms be when i by the btl? it would be dual 1 right?

ive tryed to use the checkout to find out shiping but it wont work how much will it cost to ship to the uk (if you do) thanks jordan

Its going on 2 weeks now that I have ordered a recone from you guys and have had no emails or ups tracking number given to me. I have emailed the sales and recone emails mulitple times with no reply, so hope you guys see it here. Wondering whats going on, the last 2 recones I have ordered have been on my doorstep in less then a week. Thanks, Randy Invoice number: I-17788/00

I was wondering how many 12's and how much power would it take to do a hair trick in SUV??

Hi everybody, I'm planning on reconing from 12 to 18's. But I'm a little confused, the subs are BL 12 D2 PC. The problem I'm having is the wire looks to be flatwind, I had taken pictures because the coil does not say FW. Also the shipping info does not say Flatwind, infact next to flatwind it says no...Help!! Thank you.

Need help..don't kno what to get

i was thinking of getting a BTL n2 15'', an ported box from this website: http://www.klausaudi...oofer-boxes.php , im not sure what amp im getting but something like a 2000W-2200W, then im getting new battery, big 3, and a high output alternator (250 amps), also im currently looking for new navigational system and speakers. i have a 2005 cadillac escalade esv so i got plenty of room. i was just wondering if anyone has any good ideas for the amp and speak system. i just need some decent speakers and amp. also what would you recommend for box volume?