General Fi

I have a 15Q and i made a box for it. The box is 3.146 cubic feet. I have two 3" tube ports and i need to know how long they need to be to achieve a tuning of around 33-35 hz. Thank you in advance.

I decided to change the "sub-stage" in my truck from that single 15" in that ported enclosure that just never seemed to sound right to two Fi Q 12" in a dual chambered sealed enclosure. The enclosure has about 1.5ft^3 per chamber. The two subwoofers are without the BP option and are being powered by an AQ2200d amplifier.(2200watts@1-Ohms). Hopefully sending each Q with around 1100watts. The subwoofers are DVC 1-Ohm, wired in series to 2-Ohms per subwoofer and bringing a 1-Ohm load on the amplifier. The first Fi Q 12" has been bought and so has the AQ2200d. I plan to order the second Fi Q in a week. What influenced my decision for this subwoofer stage: 1. The Q's performa…

I am waiting on a reply from Nick. I don't see to many people reconing an ssd. How much is a recone kit for an ssd. I need to change to D2's instead of my D1's. I picked up another Zapco Studio 500 and need 4ohm a woofer. Can it have the copper coils and or the flatwound coil on this go around with a stock motor? Is it a kit or just a cone? you know, does it come with glue and shims to locate the coil in the gap, thats sort of stuff. thanks

my alternater is http://www.autozone.com/selectedZip,78570/...g/selectZip.htm would that be a good alt to power my system...that is around 2k...

does anyone know how stable a diamond audio d3 800.1 is at 1 ohm? running a fi q 12" with dual 2 ohm and bp?

Hello...im francis..also new here at the forum..im from san jose california and i WANT to buy a Q..heheh...can someone direct me in the right way...seems i cant go thru their website or something thanks alot....

My first sealed box for my 2 Q15's was 4.4ft^3. It sounded perfect. Now I have 4 Q15's sealed in 8.6ft^3 (after displacement). It is a little less then half the doulbed volume of the dual sub box. I assumed that my roll off would be nearly identical to my first box, or my tuning would be slightly higher, but it is actually opposite. It peaks at 35hz +/- but rolls off quickly above 40hz, as if the box is too big. Could it be possibe that the specs need to be adjusted do to box size or the amount of subs used? Maybe because it is all a single chamber? Because if this, I am considering doing a box that is about 10ft^3 with 4-5 4" round ports tuned to 34hz. That woul…

Hey guys i have been looking for a FI logo for my vehicle anyone have a PDF or know where i can purchase a decal? If you have a PDF if you could send it to [email protected]

box is sealed each sub gets 2.3qf will get 2nd sub soon.. or should i go with single box 4.3 qf and a single BL ?? i like my hair to shake its relaxing.. but was wondering if 2 fiq 15s will sound louder and clean bass vs 1 15bl on 4.3qf.. i have a pretty good front stage.

Well all im waiting on is the second d3100 which ill have next weekend and im calling ohio gen for an alt right after i post this. and yeah those are audiopipe 30001d's but they are the newer model cea rated ones. i know not the cleanest power but should slam pretty nice. crap i forgot to throw in pics of the extra decals and fi hat i got with my 2nd sub since i waited patiently . I thought it was a pretty cool gesture, thanks fi.

my customer have 2 FI BL 15 on a 2.8 cubes each box tune @ 41hz using 2 4inch round port. each enclosure. we did a 148.4db on TL.the car was a toyota rav4. sub up port rear position. any idea how to gain it's db? i'll post pictures later.

The website will be updated at 12:00 right.IF THAT IS THE CASE, that means the west coast gets to order there subs at 8:00PM if I'm correct. I doubt the site will be updated *could you please fix the Forum button too, It just refreshes the page.* Curt

i gest orded my first btl 18 im going to put in 8cuft box tuned to 30hz fith a usamps2000hc to it what do btl users thank

hey guys so this will be my first box build. I have 18in fibl dual 1ohm with a jbl gto 1200.1 watts 1114 watts rms at 2ohm. my max demsions are 37L by 20W by 15 Depth. Im using Re enclourse calculater. But i want to know whats a good port area size and port width and any other factors that i should be looking for liiek what it should be tuned at. I want it to sound loud, hit lows, and have good air flow. If you guys could help id appreciate it

What needs to be done so i can complete the order process for 1 15" SSD standard. Need to be here by the 10th if possible. I emailed [email protected] and got a response late last night. shipping will be to 35950

So i built a box and everything was lookign good. I ordered two 3" port tubes. I tried to put the box in my car without the face board on and it fit. However with the front board on it did not. I had to therefore inset the board changing the demensions of the box a bit. The box demensions are now 25.5 X 17 X 16.75. How long do my 3 inch port tubes need to be to achieve a tuning of 33hz. The woofer i have is the 15Q so displacement is .19 cubic feet. Thanks for the help.

I haven't been able to personally see a FI dust cap, but is there a way to change the color to something not offered by FI? Is it possible to just take some paint and paint over the white version with the color I want?

I just ordered the 15" Q along with the Sundown 1000 amp. I have had the Ascendant Audio Atlas 15 for the longest time. I thought to myself, maybe it's time to move on, so I did. Saw the awesome deal on this site for the amp, jumped on that. I did have one question, I was looking at getting some 0 gauge wire. Looking at KnuKoncepts wire. I just need to figure out the fuse size. What size should I get? I was leaning towards like 150~200A Thanks Sunny

Scott, I ordered a recone kit over a week ago for a local customer of mine to recone his 03 xxx motor. Im sure your just super busy but wanted to see if you happen to get a chance to build it or ship it out. Paypal address was [email protected] . Just figured this would be the best way to get in contact with you. Thanks Corey

what's the best way to mount a sub box to the trunk

im looking to get a 15 btl. should i go 1 or 2 ohm and amp? and yellow top? and anything else you could suggest?

Sup guys this is just another thread on my box problem that has been solved finally. Most of you guys probably saw it before since there isn't a crazy amount of new threads everyday. Anyways I thought i'd post some pictures of the new one since everybody lovvvvves pictures haha. Should be in the show off section I'm guessing, but a BTL is going into so oh well. So tell me what you guys think..I hope this isn't a pointless thread but it probably will be lol. Lata This is my former thread where I discussed the messed up box that I paid $300 for. http://www.soundsolutionsaudio.com/forum/i...showtopic=28637 Check out the major difference.

I've got 2 x 18in BL's going into a wall and was wondering how big to make the port. The way it sits now, there's about 10.5 cu per sub. How much port/port area should i have. It is for daily booming and bass race.

how do you all think a 18 BTL would sound in a 1992 lincoln town car??? i used to have 2 12" kicker l7's how would the BTL compare to those thankls

Just got the BTL fully loaded 18" in. it's in a transmission line box in the back of my envoy XL. taking up all my trunk space along with the removal of the third row. being powered with Audio Que's 2200D amp. was wondering what comps i should be looking at for my doors and im putting a row of 6x9's facing forward behind the headrests of the second row on top of the box for some extra midbass. was wondering if anyone could give me a hand? not looking to spend over 300 for each set of comps and ill drop probably around the same for the 6x9 pairs. i've been looking at the kappa perfect 6.1's by infinity and audioque's component sets. thanks for the help. -d.kish