General Fi

Few questions before I go ordering my 15 BL .5ohm with options. 1. Will ordering online yield prompt service or should I contact directly? 2. What is the current wait time. I want to know before I order. Not worried about the overall time but if it's a month after expected build time then that will be unacceptable. 3. Which shipping company do you guys use if not UPS? How much will it be insured for? Believe that's all I have for now. Look forward to doing business soon. Thanks Mike G

I emailed scott and he got back with me on a price, and emailed him back but haven't got a reply. just wondering if i should write anything on the package as to why i'm sending them to him? and just wondering what the lead time would be from the time FI gets it till the time i receive them back?? Daniel

I have a 2002 Nissan Sentra and was wondering if anyone would be able to share a box design that they have in there Nissan Sentra for one 15" BTL? Room is not a problem because I don't use the trunk for anything but for my audio system. If anyone has any ideas that would be great. Thank you. You can see my setup I have for now at http://www.carstereo.com/rwussow. Later.

ladies/gents if you've emailed us in the past 5 days or so i've been unable to reply in a timely manner due to praying to the porcelain gods via a flu virus...trying to play catchup right now thanks for your patience.

I have a 15 kove armageddon that needs recone and i saw in another post that fi might be able to do it can anybody from fi help me with this thanks?

http://www.caraudio.com/forum/showthread.php?t=260162 sorry for the link, but i had a problem trying to upload pic on here. check em out and tell me what ya think...!

I currently have two Kicker L7 10's vented running off of a KX 1200.1 in an Extended cab 2000 Silverado. I am loking to upgrade to something a little louder, so I recently did a cut through into the bed and am looking at putting a BL 18" back there. My question is would this one 18" be louder than my current setup? I plan on porting the box and running it off of the same amp. If anybody has a similar setup to the one I am looking at, if you have gotten it metered and could post the numbers that would be great. Thanks.

i have a Bl 15" that is blown and it needs to be sent in and repaired. but while its being repaired i was wondering if theres a way to upgrade it to handle 1500 rms..if so how much would all this cost to get fixed? or would it just be cheaper buying a fully loaded new one?

Just stopping by to say hello its my first post over here and im making it because i have two packages coming to my door in 2 days Its two 12" SSDs cant wait to get them installed even though i think im underpowering them a bit (running em off of a zx1500.1) They should destroy my 2 12" CVR! even though im disappointed that my original shipping date got moved back from today to the 15th im still pleased with FI cause i know they make em well thats all the talking im doing for now till next time

hey gonna try and fit a 12 btl behind the seats of my crewcab silverado moved the seats forward I got the mounting depth cleared but want to know the measurement from the highest point of the foam to where the ring meets the wood to leave a lil space so the seat wont rub the sub at all when its running, thanks.

So i got my FI Q back from a recone like 2 weeks ago. and since it's been hooked up i hear like a rattling type of sound when the bass hits during the majority of songs (some sound fine usually the loud bass songs) i went next to the sub to hear where it was coming from and it sounds like it's coming from the sub itself any idea as why this would be happening? Also if i put my back seats up (my box sits flush with the back seats so the sub faces the cabin while i drive so with the seats up the sub is touching the back seats limiting it's excursion) the sound dissapears and it sounds like clean bass on any song but since it is limiting it's excursion it is noticeably quiet…

Welll I have already decided to go bigger(And i love building things)...So this box is up for sale. Its only been used for a week, but will stay in my jeep untill its sold...if its even sold. I didn't build this to sell it so I'm not asking much... 110 + Shipping... I will replace the carpet before hand as I ran out of carpet the first time lol so the bottom part isnt fully covered... 6 Cubes @ 32hz with 95.6 Sq/in of Port Area Box Dimensions are 16.5 X 45 X 24 Sounds AWESOME...

Which RE Audio Sub does the Fi Q 15 with BP Power resemble or is most similar to?

Buddy is torn between these setups. Obviously one requires 2k more power. Aside from that, everything else is pretty close. I think that the ssds wont be much louder for all the extra work - any other opinions?

Hey guys! First off, I am new here and already love it. I have heard great things about Fi and decided to run with them in my next setup. I listen to, well, almost all rap and I want to compete for the first time with my new setup and am not sure what to run with. This is going in a blow through so I have a decent amount of room to play with. I am not sure what I would be better off doing in a setup. Right now I am kinda torn between doing something like 4 12's sealed (probably Q's) versus someting like 2 15" BTLs ported. I want to get super stupid loud. Pretty much I am just lookin for suggestions and ideas of what to do. Amp wise I was thinkin if I go with the 4…

$500 is my budget including shipping and in a 4 to 4.5 cubic feet box powered by a hifonics brz2400.1d . I was looking at the 15" btl, 15" xcon, and the 15" zcon for $30 more. I'm going for spl, i just want it to be loud. also i look at 2 ssd 15 is a slightly smaller box then recommended. what are you suggestions/recommendations ?

So ive done the big 3 and upgraded alternaters. The big 3 is done in 1/0 awg. Its pretty dern strong. No more dim lights, Voltage drop isnt bad at all. im sittin at about 14.7 when the bass hits itll drop to about 13.9 But does anyone have any advice on how i can get some highs outta my speaker? ive got a jvc kdr 300. is there any settings on there that would help?

..own one 12 in FI Q which i bought used, getting ready to purchase another. Wondering if there is a way to tell if the speaker i already own has the bp option so i can have matching subs... any ideas?

does fi audio have any plans to come to any shows in california in the future?

I wanted to send out a thank you to Scott and Fi for making sure I had a sub here and ready for NOPI Atlanta! Thanks guys David Smith Hotwired

bought 2 BLs last year and they finally blew out, last night i ordered a recone kit for them, but i was curious is it possible to use a BTL con on the BL to handle more power??

There are a couple of sealed videos of the Qs on youtube but I'm looking for more if possible. I particularly want to hear what 2 12s sound like sealed. Thanks a lot if anyone can help

I don't know very much about the x 12's and i was looking for some input. how do you guys think 4 x12's would sound in a tahoe with a ported box tuned at 30-32 hz with an epicenter? I will be running somewhere between 1500 to 2500 watts to them.

that is all.

Shame on me if this has already been answered, or if this is a stupid question in some peoples eyes, but do you guys plan on updating the other models anytime soon, if at all?