General Fi

Would like to buy a Q motor and a 15" basket so I could throw the extra soft parts I have in it. I am using Fi soft parts for the recone. I have an extra Q Fc D1 I would like to build this sub for myself and give my pre-09 to my buddy for xmas. What would the pricing and shipping look like for this motor, basket, and some glue? =/

Ok quick comparison. I need to buy an alternator very soon and here's probably the best ones i've found so far. http://powerbastards.com/proddetail.asp?prod=Fitzall%2D220 I think this is a ledgit site and product, input? I think this one needs to be custom mounted which will a pain in the balls and will cost a good amount to do. or there's this one that after looking at my current alternator looks to be one that will fit without fabrication... http://www.maniacelectricmotors.com/hiampalrefor.html Any one with a maxima also? Between the two which should I go with? I am going to be running a SAZ-2000D in a '03 Nissan Maxima 3.5L...ummm 15" BTL...no other electrical up…

I have an RE SE12 sub that needs a recone. How much would a recone be and who do I get in contact with? Shipping zipcode is 34695

How much to change a fully loaded BTL 18 to a 12 or 15? I need a much smaller box for my new truck.

after gettin the body work fixed on my truck (was rear ended last week) one of the guys from Vices autobody wanted to hear what it had. I wonder how they knew i had beat anyway, if you guys are tired of me posting so many vids just let me know, its not my fault i get stopped every day almost for a demo.....sometimes i film, sometimes i dont..its better when someone else films though i can concentrate on what im doing. also if you look in the vid its hard to see but people came out from across the street in the other buildings cuz i was makin so much noise. Thats where i panned over and started to snicker a little NA0-wnWzf6M oh, when i get it on the site it will be m…

Just as the title states?? I travel over that way about 8 months of the year. after being told that the last tl i used reads low i'd like to try another one. just wondering if you guys had one. thanks!!

I've been waiting almost a week to receive my paypal invoice so that I can pay for my sub. I think they forgot about it. Can a rep please email me, I'd rather not give my to JL.

are awesome! teh stickers are destined for the car audio tool box and the tshirt my back. me thinks my good looks will be increased twofold thanks to that nice tshirt. no kidding, i think the girls will come arunning, ala axe bodyspray commercials. my thanks to scott, (seriously, it is a nice shirt, as are the stickers, and i appreciate them!) for making me a hottie! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Ladies/Gents, I can't keep up with private messages. I had them turned off a while back and then some how or another they got turned on again and we've magically got space for 500 private messages...that I don't want to have in the first place. Please just email me. Nick " at " ficaraudio.com Thanks!

What the shipping information for my subwoofer to Fi caraudio?

Great company, they really do you right. Not to mention put up with arsehos like myself in a professinal manner! I will definetly be doing more business with Fi down the road!

hey guys i just placed an ofer for a loaded BTL 15. i couldn't add any notes anywhere but along with the order could i get some decals and some flyers? thanks!

Ladies/Gents, I've attempted to click and reply on every thread in this section and I can't do anything with it. Please email me any and all questions that you have and i'll get you taken care of as soon as possible. Nick " at " ficaraudio.com Thank you so much for understanding! -Nick

I am not trying to ask "when can I expect my package, it has been 2 months", simply asking if everything is being built on time. If I can expect what the website says, then I will be patient and wait. If anyone knows if the factory is behind with the holidays coming up or anything, please let me know. Thanks.

Hello, I have a PT cruiser and I am looking at the Q12s or Q15s (4 of each) I have the back seats removed and have about 17.875 cuft to work with, the box would be: WIDTH is 39 in. HEIGHT is 24 in. DEPTH is 33 in. Would there be enough room in that box for (4) Q15s sealed? Maybe able to add 2 more inches to the Depth! I will running about 1500 watts rms to each subwoofer, will the Q12s or 15s without the power opt. handle that much power in a sealed box? thanks.....Brian

I have been building boxes for sometime and I notice that a lot of boxes have the same concept but are built a little different. When I build a ported box for two subs I normally direct the air out of the front (depending on the application) of the enclosure with a divider between both chambers. I have seen some enclosures with no divider coming out of the front, just a big hole. Does adding or taking away a divider give off a different sound? I also add one in the middle just to make the box more rigid. I am building two ported boxes for a van. Would it be better to port it in the front like I have been doing or to go another way. I would think that by porting it …

the btl recones will fit mt motors correct? and how much for dual tinsels. they will both be d2 18's. thanks

I made the box for 2 bl's I made the cut ID 11.375 I know it should be 11.125 Will that 1/4" be okay? Will the sub screw in?

Just wanted to say thanks to all from fi. Love my BTL's and wouldnt change to anything else. Will always recommend them to anyone

hey everyone, I hate to be a bother, but i ordered my fully loaded 15inch BTL on march 13? when should i expect it to arrive at my house (i live in NY) thanks so much

Im am trying to get my box for a 18" Bl made before i order so that when it comes in i can just drop it in and go. Here are the specs and a couple of scketches. I also have a coulple of questions since i dont have the sub in yet. My main concern is i am wondering if the subwoofer is going to fit between the edge of the box and the L port. The distance between the two is 19.5 " is this enough room to fit the sub and the outside of the basket where the screws are. Also what do u think about the dimensions and the design. Lookin gor constructive critisism and ideas. I designed it with the re box builder. Its going in an 04 Jeep Cherokee Limited. does this design have too m…

Well my avalanche is officially done. The suspension was getting loose as it was and I apparently smoked the coils. I was listening to white girl when my car suddenly started to fill with smoke. It kept playing after that believe it or not but it was alot quieter and now it's cutting in and out. I know on the main site it says you guys recone other companies subs and considering the fi and AA connection I know this is where to go. However I didn't see any links to follow. Who do I get in contact with to get a recone kit sent to me? Can I get a cool new dustcap? (i'd like a new AA one, but whatever, just sick of the plain black)

so i got the Re SX with the extra power mods you guys added back from ups today it looks and sounds awesome. i was really blown away by how much stiffer the suspension was than the sx suspension, and those tinsels are out of this world thanks so much for the help guys, it really wangs hard! ill definitely throw some vids up when i get the chance, got the sub 45 min ago and it's in and tested already.

Just wanna know anything you can tell me about the new IB stuff. Specs? Prices? Availability? thanks

got a 15 Q with bp option and a sundown saz 1000d....can't wait for them to show up. Had a 15 bl with all options and hifonix 1606....had to sell it cus I needed money at the time. Went with a q cus I love sealed a lot more. CAN'T WAIT!!!