General Fi

hey guys, i ordered a btl 15 fully loaded and now im deciding my amp. I was wondering if it is safe to run the dual 2 ohm sub down too 1 ohm so i could just get a audioque 2200 or do i need to run it at 2 ohms and get a audioque 3500?

whats the difference between the fi btl and the fi bl ?

So my grandfather comes down for a visit in his new car, one of those two seater fast driving Caddy's, nice car. He sits and listens to my system, seems to love it. Out of no where this 72 yr old throws me in his car and cranks up his radio. He has an SQ setup using 3 10" eclipse subs (not sure what type, but nice), and two sets of Rainbow Germaniums. That stuff sounded nice. For the first time I was listening to something that didn't just throw out so much bass that is almost all you could hear. To make things better, my old lady is makin me sell one of my trucks to get a car in the next couple months, meaning a new setup. I will probably be on here asking all sort…

Web guy got a few new shirts and the hats up...he's working on the beanies and a few other things as well. Got a long sleeve shirt too

Im ordering 2 18" Bls running off my one kicker 2500.1 i already have one order and i m about to get my second one ordered. i want to know who is Also Running 2 18's of any series of Fi audio. and how does it sounds. ive never ran 18's before and im very curious on how they perform.

Hey guys, I was out at a local SPL 2x Show here and ran my Q 18's Off my JBL BP1200.1 in a 16.8CuFt box Tuned to 25Hz (Its made for LSQ not SPL My highest was a 143.7dB @ 36Hz !! Taking 1st in Street Max 1-2 NW And in bass Race I was competing in the semi finals and finished in 3rd with an average of 134.7 in the 139.9 runs It was awesome, i love these subs they are bottom end beasts... Next show in sept im gonna try an SPL box for em to see how they do tuned higher with more power.. I cooked my JBL on the Last run hehehhehe

I had time to get things rolling, so the old style Xs are back up in D4 coil and 10" and 12" sizes. 10" D4 $65 ea 12" D4 $75 ea Starting with a cast aluminum basket for a rigid foundation, it uses a double stack motor with a 2” copper voice coil wound on a black anodized aluminum former. A poly cotton spider and curvilinear cone with multilayered foam surround keep things controlled under the toughest of conditions. Far from entry level, the Old School X Series provides deep, detailed, and powerful bass from both sealed and ported enclosures. 250W RMS and 16mm Xmax. Great subs in smaller systems or monsters in multiples for cheap Discounts of $5 per sub on orders of 2-…

Hey guys what would hit harder? 1 15 BTL - fully loaded. or two 15" BLs With everything except full cooling option?

this really should be a commercial or on the intro page to fi's site, only thing is it's ascendant woofers. oh and yes, I know the system isn't the loudest out there but the way the t-shirt happened to stay there is badass

i have one ssd 10 and i was wondering if a 2cubic foot box would be too big if the recommended size is 0.6-1.2 cubic feet

Im trying to find an amp that will run with a dual 1 ohm Fi Q at maximum Power for under 300. If anyone could help me please reply and with a link. Thanks so much P.S Scott i may not have to send you back the dual 1 ohm amp for the dual 2 ohm if i can find an amp that will run according to the fi q dual 1 ohm.

ok well i accidentally sent scott an email about this, my bad, but ill post it on here for you all to read. can you recone a soundstream T4 15. its D2 coils right now, and i think they are 3 inch coils. one seems to be shorting out and smoking up the trunk. if so, how much for a kit shipped to me and how much to send to sub to you to do it? thanks.

im thinking of getting a pair of RE XXX 15 they are at a razonable price and im thinking in time reconing them qith FI im not sure what year are they but i have a picture i want to know how much it would be for the 2 recones with shipping the zip is 00725 im from puerto rico thanks i want to know price with basket and without now the pic

So this last weekend I came home for spring break. I have a 15" Q and my brother has a 12" q. Saturday night my sub quit playing and I was a little drunk so I didnt worry about it. On sunday we built a new box for my brothers new truck(he unhooked in perfect condition 3 weeks ago) and by the time we installed it we realized the top magnet was cracked all the way around and shifted about a 1/8 inch, so the coil was grinding and sounded awful. We ghetto fixed his by beating the magnet back into place with a rubber mallet and siliconing it in place, now it sounds fine. The next day I went to diagnose my problem. I blew the sub when I was drunk when I turned my deck and b…

Okay well I broke my sub (Fi BTL 15) in for about a week so I turned my amp up (Power Acoustik BAMF 4000/1D). It claims 2200 rms. When I turn the bass up high enough the sub will start making popping noises, I'm pretty sure my amp isn't going to bottom out a BTL so I figure my amps just giving a clipped signal. I checked my wires going to the amp none of them seem to be pinched anywhere. I'm running 8 gauge that I had to cram into the terminals on the sub. Do you think that is where my problem is that maybe the speaker wire is falling out of the terminals or messed up? I would look but taking my box out is quite the pain I don't wanna do it if I don't have too. My only ot…

Not in a rush Scott I know your busy but the prices shown at Fi aren't as exciting as the one I purchased before...lol I'd PM this but.... Do you know or remember the setup of the sub I purchased?(Meade's build) I'd like them the same but Dual 1's. I know the previous one was set up for Daily and thats it. I'm new to the BTL's and I'm hooked and wont use nothing else man. I want 2 of them.

They are about 3/4 the way through. u94gS4tF3SE I'm the guy at the end, in the tank top, with the big breasted girl (black bikini top) I did the production and editing, so I hope its all good.

The SP4 huh? No tech info on this sub yet. When did this come out? Care to share some facts?

why cant i post pics? Sorry, dynamic pages in the tags are not allowed whats that supposed to mean?

Need some help, I have an 09 Silverado ext cab truck, and currently I have 2 type r 10's and a PA BAMF 2000/1 amp, the box is tiny, fits under the back seat and down fires (sealed .6cuft each sub) . My buddy with the exact same truck, just put in the same box with JL 10w3's and a JL Slash 500/1 amp. His system KILLS mine!! My type r's sound terrible. I thought it was the small box but a local shop told me it was most likely the crappy amp that I have. So, I have decided to throw my current set up in the trash and do it right this time. My question, should I go with the SSD 10's or wait for the new Q's? The amp I will use to power them will be a Sundown SAE-1200D (unless …

got a 15" BL and i bought a cadence amp kit and it came with 12 gauge speaker wire was wondering if that size would be okay or should i got alil bigger?

I have a 2004 BMW 330Ci. Here is a list of what I have: Eclipse AVN-5435 Audiocontrol Overdrive, ESP-2, DQX, and DDC US Amps USA 200x - tweeters (50x2) US Amps USA-400x - midrange (100x2) US Amps USA-2000x - sub (2000x1) OZ Audio CS-180 (old school superman logo) 1 Fi Audio Q12 D2 in a 2.0 cu ft box tuned to 33 hz with 24 in of port area (small, I know). First, the car Previous setup to the previous setup (3 ID IDQ10 V.2s sealed powered by a US Amps USA-1000) Previous setup (05 RE XXX12) Trunk Another interior shot Controls in center console

Hi all, i know that 1/4-20 will work, but will 5/16-18 bolts work? i will be using tee nuts and bolts to hold the sub in. the sub is the Fi Car audio BTL 12". basically just want the biggest bolt that will work. im sure there are plenty of people out there that can measure the mounting hole size and the rubber seal c'bore size. I just want to get the stuff on order and installe din the boxes before the sub gets here so its a quick intall. also i would assume the 18"s have the same sized mounting holes and c'bore in the rubber seal? Thanks in advanced, Anton Miller

I was wondering i ndmstang65 or someone else from there could tell me if im getting the new or old models i ordered mine on april 1st?

Alright guys i have an old box for 2 15's. Its 10 cu.ft tuned to like 33 hz. Im wanting to get some new Btl N2's. But im not sure if i want to stick to 15's or cut the holes out bigger to hold 2 18's. What do you think i should do? Never had 18's. So Im trying to squeeze the most spl's out of it as i can. Also i will be using my Memphis Mojo 4kw amp.