General Fi

Ok so im getting one 15 BL with a sundown saz-1500 should i get dual1 or 2 i want to run the amp at 1 ohms

quick ? This is the first sub that I'm planing to purchase that has the option Dual 1 or Dual 2. You know most sub are Dual 2 and Dual 4 . Im planing on getting a BTL 12, only one and wire it down to 1 ohm. I usually get Dual 2 , So do I still choose Dual 2? and How do you wire a single Dual 1? Thanks

So I've decided to get a sundown SAE-1000D to go with a 12" Fi Q and I have one question before I go ahead and order them. For the sundown amp, do I want to order the Q with the dual 1 or dual 2 ohm option? And would I need the BP power option as well? Thanks Ryan

I need help deciding on what voice coils to get on my fi bl 18" dual 1 or dual 2 ohm would like to run it in 1 ohm.

hey guys, i ordered a btl 15 fully loaded and now im deciding my amp. I was wondering if it is safe to run the dual 2 ohm sub down too 1 ohm so i could just get a audioque 2200 or do i need to run it at 2 ohms and get a audioque 3500?

Dual 2 would be this one right http://www.the12volt.com/caraudio/woofer_c...sp?Q=2&I=22 ??? if not then which one of this will it be http://www.the12volt.com/caraudio/woofer_configurations.asp

well my recones from Fi came and they were supposed to be dual 2s....so i could run my ab 500.1 at .5ohm....but the coils read 1.5....which means i have to run my amp at .35.....not very good..... just curious as to why they arent actual dual 2s

I have a 2 channel amp and im tryin to see if I should get a dual 2ohm voice coil or dual 4ohm. How will i be able to wire the subs to get a 2 ohm load to the amp without having both subs connected to eachother

Sorry for the noobness of the question, but I really don't know???? Does it go on top of the rubber rim or inside the rubber rim against the metal frame that the surround attachs to?

I hate to ask this, but I have hit a crossroad. I am looking for some real good output and have around 2k watts of power to play with. I have about 3 to 4 cubic feet of room to play with in the trunk of my car. What would probably work best, 1 15" BL or 2 10" BL's. I thought the 2 10's due to sheer cone area, but any other input would be cool. I am fearful I will not have enough room for a BTL, so that is why that is not in the running.

I am planning on possibly doing 2 18" BTL's in pretty much the optimum enclosure to be put in the back of a Tahoe. Ported to the back, subs upward running about 2500-3000 watts each for daily. I am newer to all of this and hate to ask this stupid question, will that get loud as hell??? I would like to compete and wondering if this would be good for daily and competition. Wish I could do 4 18's, but I doubt I can afford that much power, LOL!!! As I said, I am very new to all of this and learning, so any info would be great... Thanks

When I play certain songs and music for long periods of time my dust cap get pretty warm, i know you are suppost to smell a glue smell at first but its been about 3 months since ive had my q's and i still smell glue... ive had it oscillioscoped, what else could cause this? the two Q's are on 2 Alpine Pdx 600.1 Anyone Have any ideas as to why this might be? any comments would be truly appreciated

I love the fi sub line up, the only thing i don't like is the outdated dust cap. Hate to say it but the domed dust caps just look ugly. The visible glue, the rough cone material combined with the dome cap make the sub unrepresentable. Do you guys ever think you would come out with dish style dust caps that cover the whole cone? maybe in the blueprint line up? I plan on purchasing a ssd15 in the near future and just hoping you'll offer dish caps, or mybe i'll just wait for the blueprint subs and check them out.

so allways hear people talk about how there dust cap is warm is it normal blah blah... and then say some or one is warmer then tha other......... but i never see people ask how hot is too hot!>? i know it will be warm just knowing how a sub works i know it will be warm... mine arnt too hot.. i dont think they are!

I haven't been able to personally see a FI dust cap, but is there a way to change the color to something not offered by FI? Is it possible to just take some paint and paint over the white version with the color I want?

It's great that Ficaraudio is busy and prospering. That means they'll be around for a long time to come. In the meantime, it appears that they have an auto responder taking care of some of the e-mails. Any idea when you guys will be caught up. I may be ordering drivers in the next week or so and I had asked a couple questions that I didn't necessarily think were fodder for the general forum. Carl

what's up with the email system? sometimes i'll be going back and forth with scott, and suddenly i stop getting replies. I emailed June 1st, June 9th, June 11th, 14th. Still got nothing. It's happened a couple times already..

i was wondering if this box would work with a fi 15" ssd. my girl just ordered a hifonics 1200 to go on it and a stinger 4 gauge kit with a stinger cap. http://cgi.ebay.com/15-CUSTOM-PORTED-MDF-S...1QQcmdZViewItem

Where can I find an accurate list of Fi or AA dealers ? I found a dealer on ebay, just in my island ! IT seems too good to be true, but did not find no prices. Btw, I live in Martinique (FWI) Can this dealer be legit ? Some people are interested in the BTL here, and I would not like them to have any problem.

yep, another recone question. i have a pair of blown 12" eclipse ti's. i don't want them reconed to their previous specs, instead i want something different. maybe bl/btl like? what do you think? can it be done? how much? what can i expect as far as perfomance, both output and sq? thanks in advance fellows.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

can Fi recone a 12" Eclipse Ti to a 15"? not too sure what motors are on em

A buddy's Eclipse 10" has blown. It's this one if im not mistaken: LINK Can Fi do a recone on this? If he wanted it reconed to a 12 or 15 Im guessing he'd need a new basket?

Can anyone tell a big dfference buy switchin from eD19ov.2 to FiQ18 or Fi Bl18 in terms of sq and overall output? Question# 2 iv'e notice that eD19ov.2 uses a single spider FiQ 18 dual spider Fi Bl 18 triple spider What heck is a spider and what does is do? btw power and space is not an issue and i will be using ported boxes.

why cant i post pics? Sorry, dynamic pages in the tags are not allowed whats that supposed to mean?

Hi there guys, I was wondering if someone could help me out. I've placed my order a little over a week ago and Paypal is still processing my payment. I wanted to change my dustcap to the Brushed alluminum instead of the white. My order number is I-17454/00.