General Fi

I am looking for more SQ than anything, with some good output of course. I plan to run an old school Linear Power 8002SW to two of these possibly. Would they be underpowered? If you are not familiar with this monster of an amp then please do not respond.

Well, my homie wants to run a good amount of 12"s, or possibly 15" ssd's But he wants to do a blowthrough from the bed of the truck to the cab, what would be the best way to do it? He's thinking about doing it in sections, and i think that the way that might be best is to do 4 15"s SSDs and a SAZ 4500 and then do 4 more and another SAZ 4500 but, would you have to do a band pass pretty much??

I was thinking about getting 2 BTLs(12s) but i would like to get some feedback on their quality and what is recommended to power them.

Just a random question, Im thinkin about holding off to see but I figured Id ask the people that know best. So are there going to be any significant changes within a year or am I safe to order now?

It feels like a good Friday to give away some free stuff...for the next 250 Q's that are ordered you get a FREE BP power upgrade! www.ficaraudio.com When will it end? No clue...jump on it while you can

ok well i bought 2 subs a few months back and one of em ended up blowin. so i got scotts number and called him. he told me to send it in and theyd look at it and try n fix it. it has been about 2 months now since i sent it off and i havnt heard from them since. i have emailed scott and nick and ive tried calling scott and no answer what so ever. i understand they are busy but i would atleast think they could answer a phone. i mean seriously......2 months. hopefully one of them will answer me on here

hey gonna try and fit a 12 btl behind the seats of my crewcab silverado moved the seats forward I got the mounting depth cleared but want to know the measurement from the highest point of the foam to where the ring meets the wood to leave a lil space so the seat wont rub the sub at all when its running, thanks.

I now have my 2nd 18inch fully loaded btl, This time am planing to build it for my large home theater room setup powered by a home DIY amp that can produce 2.5kwrms. in our country we use 220vac. http://i165.photobucket.com/albums/u72/pilyo168/schematics/5000W_power_amplifier.jpg -------------------------------------------------------------- As for car design. From Fi tech recommends: Fi 
BTL 18 – Ported box we recommend using 5-8 cubic feet @ 30-35Hz tuning, you can tune a little higher if you wish but we recommend keeping it close to 32hz for a daily driver. Again the same 12-16 square inches of area applies per cubic foot of volume. ---------------------------------…

Ok so i got 2 12" SSD Subs and i was wondering if anyone could post me a link on what kind of box i should get with them. Ported or Sealed. Just let me know

what options would i need to get on my fi ssd 12,s to make them handle 1100 a piece

When it says that all subwoofers are custom made in 3-7 days. Is that one subwoofer or is that the ones you order. Like if i ordered 2 12". and it took 3 days to make them. would that mean 3 days to make each sub. or 3 days b4 both were sent

Hello all! Well im certainly a noob around here. I've been looking at the boards for quite a few months but I've finally decided to post. Anyway, onto business... I have a 2006 Nissan Xterra with 2 12" RE SE's in a custom 4 cu ft at 34hz enclosure (the old ones, not the seX) on a nasty TMA 1000.1 (I didn't know much about this, bought it cheap from a friend). I'm right on that 1000 rms borderline so I have not performed any electrical upgrades and my car is fine (no dimming etc). Problem is, this system doesn't really seem loud anymore LOL so I'm considering moving up to 2 15" Fi's. For amplifiers, I was considering a Sundown 1500 or Sundown 2000. I will perform the Big 3…

Ok I have a friend gettin two alpine mrp2000 amps each pushin about 2248wrms at 2 ohms and hes running that to two alpine Type X 12s.. Now me being me I just wanna 'keep up and surpass' him and Im gettin 2 BTL 12s with a Sundown 3500D but I dont have either yet.. Will my car still be louder? p.s. I plan to have 2.5^3 for each sub and tuned to about 35hz

Looking for some dimensions for a 15Q. It will be powered by a sundown saz-1000d. Its going into a 2008 scion xb. I would say I have about 2'x2'x4' area to work with. According to specs it should be 2-2.5 cubic feet. So probably stay around the 2.5 to account for displacement. I know you guys are miracle workers. I tried to remember to put as much info as possible I know people leave stuff out all the time.

I was just curious as to why it takes so long. Ive been waiting 6 weeks so far on one, email, 4 weeks on another, and 3 weeks on my last email. I've been trying to get information before I place my order but I'm pretty reluctant to order now with NO customer service. Is there no phone number?

Ok so im planning on running Stinger hpm 0 ga, with a audioque 2200d pushing a 12" btl in a 2.0 cu. ft. box tuned to 32 hz will be getting bigger soon got it cheap from a friend, and will be keeping my alpine cda 9883 hu for now, this setup will be in a 04 ranger edge with the 3.0, may take my old 4ga wiring from old setup to do big 3, mostly depending on how bad dimmage i have, is there anything ive missed or need to do other than that? Also i hear a lot about people "clipping" being a noob what can do to not let this happen so far ive had 3 audio setups and have had none blow dont wanna start with my btl! Thanks

Okay so i got the 2 12" Fi SSD and i have a 1800 Watt MA Audio 2 Channel Amp The subs are dual 1 ohm and i was wondering how would i need to wire them?

got a 15 Q with bp option and a sundown saz 1000d....can't wait for them to show up. Had a 15 bl with all options and hifonix 1606....had to sell it cus I needed money at the time. Went with a q cus I love sealed a lot more. CAN'T WAIT!!!

Okay So since the SSD are dual voice coil. (2)SSD12 D1 COP Are those going to be running at 1 ohm or 2 ohm

Ok so i have 2 12" Fi SSD Can someone Post a link on here or something of a recommended sealed or ported box? Please Help

My name is Sean Martin I Oredered 2 12" Fi SSD

Okay i have 2 12" Fi SSD and i was wondering if this box would work? http://www.hifisoundconnection.com/Shop/Control/Product/fp/vpid/2395150/vpcsid/0/SFV/30046/sret/181321621918223218217282221228283214223214287220217236291224231296225236243230231234247230239232249240 copy and paste in URL

Sup guys Given i have limited space in my ride i was wondering which of these boxes would be loudest: ported 5.3cuft after displacements @ 31hz or sealed 6.88cuft after sub displacement I could tear out the backseats which would give me plenty room to make huge boxes (16cuft) but im not really eager to do so. But i will if there's no real option. Im also just wondering if this will be louder/lower than my previous setup : 2 12" RF Punch HX2's ~ 4.3cuft @ 33hz PS. This is on a 1000wrms

The reason why i ask is i currently have 4 RE SE 15" running off of a T40001bd,, they sound great but im only hitting a 148.3 with them so since i want to brake into the 150's I want to get a second T40001bd and some stronger subs,, thing is i like the way these SE's sound so Im trying to get something strong but that can sound atleast as nice as these SE's..

Are they really backed up right now, If I order today when should I get my subs? I'm looking to get 2-12" Q's , just wondering if it takes a long time to get the subs. And Would 2 RF 1500-1's be good on these subs for a daily driver. Want subs to sound good on a variety of music (rock, rap, some country,metal ). Would get the 2 ohm version so I could strap amps together at 2 ohms.