General Fi

I was just curious as to why it takes so long. Ive been waiting 6 weeks so far on one, email, 4 weeks on another, and 3 weeks on my last email. I've been trying to get information before I place my order but I'm pretty reluctant to order now with NO customer service. Is there no phone number?

I now have my 2nd 18inch fully loaded btl, This time am planing to build it for my large home theater room setup powered by a home DIY amp that can produce 2.5kwrms. in our country we use 220vac. http://i165.photobucket.com/albums/u72/pilyo168/schematics/5000W_power_amplifier.jpg -------------------------------------------------------------- As for car design. From Fi tech recommends: Fi 
BTL 18 – Ported box we recommend using 5-8 cubic feet @ 30-35Hz tuning, you can tune a little higher if you wish but we recommend keeping it close to 32hz for a daily driver. Again the same 12-16 square inches of area applies per cubic foot of volume. ---------------------------------…

Are they really backed up right now, If I order today when should I get my subs? I'm looking to get 2-12" Q's , just wondering if it takes a long time to get the subs. And Would 2 RF 1500-1's be good on these subs for a daily driver. Want subs to sound good on a variety of music (rock, rap, some country,metal ). Would get the 2 ohm version so I could strap amps together at 2 ohms.

Sup guys Given i have limited space in my ride i was wondering which of these boxes would be loudest: ported 5.3cuft after displacements @ 31hz or sealed 6.88cuft after sub displacement I could tear out the backseats which would give me plenty room to make huge boxes (16cuft) but im not really eager to do so. But i will if there's no real option. Im also just wondering if this will be louder/lower than my previous setup : 2 12" RF Punch HX2's ~ 4.3cuft @ 33hz PS. This is on a 1000wrms

The reason why i ask is i currently have 4 RE SE 15" running off of a T40001bd,, they sound great but im only hitting a 148.3 with them so since i want to brake into the 150's I want to get a second T40001bd and some stronger subs,, thing is i like the way these SE's sound so Im trying to get something strong but that can sound atleast as nice as these SE's..

Looking for some dimensions for a 15Q. It will be powered by a sundown saz-1000d. Its going into a 2008 scion xb. I would say I have about 2'x2'x4' area to work with. According to specs it should be 2-2.5 cubic feet. So probably stay around the 2.5 to account for displacement. I know you guys are miracle workers. I tried to remember to put as much info as possible I know people leave stuff out all the time.

My name is Sean Martin I Oredered 2 12" Fi SSD

Ok so i have 2 12" Fi SSD Can someone Post a link on here or something of a recommended sealed or ported box? Please Help

Okay i have 2 12" Fi SSD and i was wondering if this box would work? http://www.hifisoundconnection.com/Shop/Control/Product/fp/vpid/2395150/vpcsid/0/SFV/30046/sret/181321621918223218217282221228283214223214287220217236291224231296225236243230231234247230239232249240 copy and paste in URL

Okay So since the SSD are dual voice coil. (2)SSD12 D1 COP Are those going to be running at 1 ohm or 2 ohm

got a 15 Q with bp option and a sundown saz 1000d....can't wait for them to show up. Had a 15 bl with all options and hifonix 1606....had to sell it cus I needed money at the time. Went with a q cus I love sealed a lot more. CAN'T WAIT!!!

Okay so i got the 2 12" Fi SSD and i have a 1800 Watt MA Audio 2 Channel Amp The subs are dual 1 ohm and i was wondering how would i need to wire them?

Ok so i got 2 12" SSD Subs and i was wondering if anyone could post me a link on what kind of box i should get with them. Ported or Sealed. Just let me know

so i was talkin to one of my buddies that sells car audio in a retail store, and when i told him i got a FI BL he goes so did you get it at the shop in rockford? (rockford, IL). and i go no... i bought it factory direct, the only way you can buy it new. and he said o well theres a shop in rockford that sells Fi. so either hes misinformed or someones buying factory direct then sellin it for a lil more. if this shop is actually doing this, is that illegal?

Hey Fi Audio, I ordered the wrong subs. I wanted the SSD 12'' instead of the IB3 12'' can you guys please switch my order and let me know how to pay for it. Or just use the money i already paid and switch the subs and not worry about the 20$ i owe you . Alright just let me know what i need to do to switch out the orders. I really want the SSDs

I want a sub that can be wired for 1ohm I ordered dual 1ohm 15 q with bp did i mess up?

Title says it all...I have a Crunch GP3000D and would love to move up to an 18" Fully Loaded BTL but I'm concerned it may not be able to handle the power...box is still up in the air, I have MORE than enough space to work with (almost 9 cubes) Right now the electrical is a 235A DC Power alt, big 3, and yellowtop under the hood. So before I proceed with any plans, with an 18" Fully loaded take 3kw daily without problems?

ok so i have a dual2 ohm btl hooked up with a 1 ohm load so for it to be stable how do i need to connect it to my aq2200d, bridged or what?

I ordered the wrong subs how do I cancel the order

ok i have 2 18" BL subs dual 1ohm flatwind cooling and pchamfer these are the first model bl's. they are going to see a sundown 1500 to each sub what is the smallest box ported that will be ok for these subs. i want to keep the box under the rear deck in a 1995 fleetwood. between the hinges, theres trunk rods in the way. i'll invert the subs to get a lil more airspace if i need to. just need to know whats the smallest the box can be and sound good

Just got the BTL fully loaded 18" in. it's in a transmission line box in the back of my envoy XL. taking up all my trunk space along with the removal of the third row. being powered with Audio Que's 2200D amp. was wondering what comps i should be looking at for my doors and im putting a row of 6x9's facing forward behind the headrests of the second row on top of the box for some extra midbass. was wondering if anyone could give me a hand? not looking to spend over 300 for each set of comps and ill drop probably around the same for the 6x9 pairs. i've been looking at the kappa perfect 6.1's by infinity and audioque's component sets. thanks for the help. -d.kish

whut do u think would be better 2 btls or 4 bls on a RF t4000 in a ford explorer ?

Just bought a second hand 18inch single slug motor btl. I would like to know if you can Visual Check the Specification on BTL series. This is question is for newbie like me. all i can say there is an allen bolt found in the bottom of the motor. also flashlight thru the peek holes seems i only viewed the top vc former and a round thingy blocking the view of vc windings. I know the featured tech is described. but am asking for the VISUAL appearances of every each features with and w/o. Much appreciated if its drawn on jpg or actual pics. Sub guts style. Please answer the following Questions. P Chamfer: - 
Cooling: - 
Flatwind: - 
HiXmCoil: - 
Inner Heat Sink:…

truck - 05 chevy colorado amp - sundown 3500d elec - 2 kinetik 2000hc's. big three. box - 4.5 cubic feet tuned @ 32 hz. two 12 bls' or two 12 btl's? looking for spl. but i also want musical daily driving. i know bl's are more musical and btl's are more loud but i wanna know if one has a significant amount of sq or spl compared to the other. example (not saying its true) : bl's and q's are not much of a difference sq wise, but bl's get very noticably louder.

i have an original style (stamped basket) AA assasin 8 that needs a recone. would it be possible to: - get the newer style 12 spoke basket (8") - recone the sub to D2 or D4 instead of Single 4 - add another spider or something to stiffen it up a bit. if these things are possible, or if they aren't, but you can do a straight recone, how much will it cost?