General Fi

First my brothers now mine and I've read of several others... So of course I had to go about fixing it... Had to shim the gap to respace it evenly, and you can see the bottom left screw isnt there and that lines up with where the crack first showed up A little innovation and lots of epoxy fixed the magnet Looks kinda artsy if you ask me If youre wondering about the 18 ga wire coming out of the sub those are my leads to the coil since I blew that a few months ago and rewired my own Just thought Id share my most recent headache with the Q, but its back to beating and sounds pretty good so I cant complain a whole lot, or maybe i should and try to get a discount on the…

HEy guys, I recently sent my sub in for repair. It has been two weeks since they got it and I still havent heard from them. Ive emailed them twice with no luck. This is getting quite irritating because I can never get ahold of them unless Ive purchased something. lol Any phone numbers? any help appreciated, Thanks.

Ok so i dont know what to get. The one BTL 18 fully loaded that will be ran off of a SAZ-2000 Or a SAZ-3500. Or should i get the 2 BL fully loaded 18s ran off 2 SAZ-1500d.

Will be going into a 03 Civic sedan, and powered by a Ultimate T3-1000D (around 2000W RMS). 15" BL would have cooling, flatwind, and enclosure would be the following: 3.1 ft^3, 33hz, 43.5 in^2 of port 12" BTL would have cooling, HiXmCoil, and enclosure would be the following: 2.5 ft^3, 33hz, 37 in^2 of port I am wondering if the HiXmCoil would make up for the loss of surface area going from a 15 to a 12? Should I squeeze the 15 into a smaller box or give the 12 lots of room to breathe? I want to move as much air as possible but in a daily driver situation. Thanks in advance for responses and suggestions!

Hey Guys I have a 03 Yukon Denali that i would like to build a system for. I'm debating on whether four 15 BTL will be better ground pounder then two 18 BTL? I do know that power has one thing to do with it and i will be running two Sundown Audio SAZ-3500D, i will have a big 3, with 2 Alts, and 2-3 Powermaster 3100 and a smaller Powermaster up front. All the subs will be fully loaded, and as far as a box i will have Fisher Customs make a box or Pound that Sound. I am open for all suggesting's to change out any thing or add any thing. Thanks Guys...

Dose Fi still make the 08 models or do they only make the 09 models now. Cause i want to get another 15 and i have a 08 model that means i would have to sell the one i have and buy two 09 models. I mean it wouldn't be a bad thing but i just don't want to deal with the hassle of trying to find someone that will buy my sub. Thanks, Kasey

I was just bored in class and a couple things popped into my head that i want some opinion on...i'm a class A noob and i just bought a 15" BTL..anyways i plan on running the sub off a jl 250/1 for the time being until i have enough money to buy a rockford t2k..i know it'll be underpowered as hell but i don't see anything wrong with it lol (i know the gain can't be cranked up so it clips and all don't worry)..but the underpowered sub will still be better than my door speakers that i listen to now since my sub went bye bye haha don't ask.. anyways i'm tight on money being that i'm still a teenager and all .. but nevermind all that sry i just i know there are some expirience…

Could anyone give me the specs for a 18" Fi Bl ported box going in a Chevy Suburban. (Plenty of space.) 47 inches in width. More than that in length and height. I want a great port and the box to be tuned to around 30-35 hz. Please help me. Specs with pictures would really help. Thank you all. I am going for low freq's. along with decent mid freq's. I am talking about the box cutting specs. Please help me.

So I'm not looking to spend thousands of dollars I was looking at a hifonics bxi 2610d It's a 2600w amp But I'm not sure about hifonics ive had mixed feeling about them. Can anyone help me out?

Hey im selling my 15 Fi Q with BP Power in a 4 cubic ft. box and (4) 3" aero ports wrapped in ultra suede and tuned to 32hz. I wasn't selling on here unless someone desperately wants it but i was asking how much do you think i should ask for? I've had the stuff since march and never abused. The sub cost me like 350-360 i think and i have no idea what the box was though. i think it was like 300 or 350. thats where i got ripped. i told one of my friends 499 for both but for other people im thinking about raising it some? or is that a god price? i need some advice ASAP because im trying to selling this immediately so that i can take part in the Free Enclosure deal from Quent…

So d2 with cooling and flatwind. Now I am in need of help, I have sent e-mails to FI and I am wondering if they could ship it as a gift so I could not be faced with border fees. Can they do this for me?

im gonna put a fully loaded dual 1 ohm fi btl in a 98' ford explorer and have an AQ 3500D powering it with a kinetik hc2400. the only thing im not sure on is a box for the BTL. i want the box to provide the most SPL. if anyone could help me it would be most appreciated.

Hey whats going on SSA. I have made a couple of posts and I have learned a great deal of things on here. I have a long way to go and I know someone can help me get there. I am looking for 3 18" Fi Bl's to buy or trade for some things. I am just curious of what will pop up. I do not want the D2's or Stock Bl's. This is not an official posting just to see if something happens. I have one and it is the 09 series with a yellow dustcap. I need 3 more to scratch the subs off of my list. Please no BS or Post Dumping.

I'm thinking of going with a 15" Q for these, powered by a Sundown SAZ-1000D So I've been messing with the RE calculator and think I have come up with a couple of designs. I just want to make sure all the numbers are right on these and see some opinions on which one is better. I like the first one more, sub up port back, does that design output well? How do you make the horizontal and vertical 45's come together smoothly? Also, would the first box fit a 15" BL? I know the second one doesn't have the airspace for a BL which is another reason I like the first one. In case by the time I order I decide to go with a BL (I'm very indecisive) This is going in a hatchback (2003 H…

What is the best way of getting a hold of Scott? I tried calling but it goes to voice every time. Thanks Jybfan04

I have a 15 kove armageddon that needs recone and i saw in another post that fi might be able to do it can anybody from fi help me with this thanks?

I have a Rockford Fosgate Punch P1000-1bd amplifier and I am looking for a good quality subwoofer. What would be the best 12" subwoofer for me to get for around 1000 watts rms if I am looking for sound quality with decent spl? I have a bassworx 12" ported subwoofer enclosure that is tuned at 42hz and is about 1.65 cu ft. I want to get an Fi Q 12" subwoofer but the recommended tuned frequency on it is between 28 and 33hz with a recommended minimum volume of 1.75 cu ft. I was wondering how much this would affect my subwoofers performance and its quality?

hey im considering getting a 12" q with an alpine m1000 would these two work well together.? and do i get a d1 sub or a d2 sub to wire it at 2 ohms. thanks ~mike

I HAD A POST UP TO RUN 4 FI 18" BTL'S FULLY LOADED. WITH A LOT OF DISCUSSION AND DEBATE I MOVED DOWN TO THE BL SERIES. I HAVE ONE COMING ON THURSDAY AND I WANT TO KNOW HOW MANY BATTERIES DO I NEED. HOW MUCH POWER. WHAT KIND(S) OF ALTERNATOR(S) DO I NEED. WHERE DO I FIND A DIGITAL VOLT METER THAT IS IN THE SHAPE OF A SQUARE THAT HAS BLUE NUMBERS? WHERE SHOULD I PUT THE PORT IN THE BOX FOR ALL 4 SUBS. SHOULD I HAVE ONE OR MORE PORTS. STRAPPED AMPS OR NOT? EPICENTER OR NOT? EQ OR NOT? HOW MANY 6X9'S SHOULD I GET. HOW MUCH DYNOMAT, DAMPLIFIER, OR SOUND DEADENER. I STILL HAVE THE 1994 CHEVY SUBURBAN 4WD.WHAT KIND OF AMP SHOULD I PUT MY 6X9'S TO. AND I WANT THAT BUTTON THAT MEA…

Anyone got pics of em?? Looking at ordering some to compliment my Q

Just Need A Simple FI Logo. Black Text On A White Background. Thank You !

So i'm interested in purchasing one 12" BL subwoofer but don't know what to select for the options. It will be going into a 2008 Nissan Altima and being powered by a Clarion DPX1001.2 and the specs are: 250 watts RMS x 2 at 4 ohms 450 watts RMS x 2 at 2 ohms 500 watts RMS x 2 at 1 ohm 1,000 watts RMS at 2 ohms in bridged mode i am just wondering if someone could help me figure out what i would need to select for Hyper Pole, Cooling, Flatwind etc. This would be a daily driver and not spl, and pleas correct me if i'm wrong but would i need a dvc 2 ohm sub wired to 4 ohms and bridging it at the amp would bring it down to 2 ohms right? need anymore information, just let me kn…

I plan on buying 2 SSD 12's and I don't know much about Amps. I was wonder if anyone could recommend one or a pair of amps I should get too power them.

Ok, i am selling my bl 18's here locally over next week or so. Should I wait for the 22" FI subs or go ahead and try the IA DP 21"? Thing is I really dont want to wait awhile before gettin new subs

Ok this is my first post on this forum so ill try to not sound like a complete noob but i kinda am because this will be the first time i mess with more that 1200 watts. So ill call this my Noob Question thread so that when ever i have a noob Question i can come back to this instead of starting a new thread. So anyways here goes my first question. Ok i plan on buying a 18 btl but i want to buy all the things ill need b4 buy the sub like the amp, H.O. Alt, wires, and exct. So the first thing on my list will be the amp. Now im kinda a Rockford fan boy so i wana go with the t2500-1bd, and i was wondering if this will be enuff power for this monster of a sub. O and ill use if …