General Fi

Well today i recieved the Dustcap for the Fi X 10 i was going to write a review on, (thanks Scott) and went out to the garage to glue her on so i can get some listening in tomorrow. Welli get out there and my CA glue is rock solid, i havent used it in probably a year so i guess it was time for it to harden up. So i guess i gotta wait now til i can make it down to Hobbytown or somethign to get some glue, as i dotn wanna play it at all without the dustcap because that wont be a "fair" review. Thanks again for the dustcap and the decals Scott, i'll be sure to post up my thoughts when i get it together finally lol. Also whats the price a Fi X 10 goes for normally so i can kn…

Was it FI that was making something called the FI X?? I have looked but can't find it and the search will not work for FI x to few letters together.. I thought they were some left over subs they had they put together, for like $70 to $99 I think.. A link would be great, I wanted to see if they still had some..

Anyone know what RMS will be on these when they go on sale?

Have a friend looking for two 10" Xs, wanted to know if the old FI X subs are still available? I know they are online, just making sure before he orders them. Thanks!

Hello folks. I been a forum lurker for quite a while. I happened to run across a pair of Fi X 10 inch preproduction models. I have no clue as to the specs of these. A guy locally has them for sale..and I was very interested in them. Would anybody happen to know the specs(rms, suggested enclosure size) on the X's as I assume they were from the first run of the sub. Thanks

Anyone have any experience with the groundpounders??????

This is my first system. I'm not sure how many speakers to get to compliment my subwoofers. I was thinking four 6 1/2" component speakers for the doors (amplified of course). Is this enough or will the subwoofers over power the mids/highs? The speakers are Rockford Fosgate Power T1652-S.

Hello. I have only recently entered the world of Fi. Before the BL came out, when I was first looking around, there was another line of subwoofers. Are these still available thru Fi or not? If so, what are the specs on them? I did not think to record them before the X disapeared from the site. Thanks for the help! Ben

Will the 10" FI X be ok in about .80ft^3, or is that too large for sealed? I bought a prefabbed subthump box for another sub and have decided I would rather use the FI X. This is going under the rear seat of my CC Sierra. I don't mind cutting an end off the box and closing the box up a little bit if necessary! Or would I be better off opening up the sub hole and putting an FI X 12" instead? I only have 6.5" of mount depth before the magnet touches the bottom of the box. Thoughts or opinions on this?

thinking about getting a motor + basket and wondering if there is any parts available for em? iirc , they had a 300wrms rating , anyway to bump that up a hundred watts or so? thanks.

I promised a review of the Fi X series for those of you who are thinking about ordering some of the remaining stock. First here are a few pics:

I have a few questions about the Fi X series subs... I am going to buy 2 of the 12" and would like to know a few things before I purchase... The number one thing is... How much power is too much? I know Scott said not to expect super power handling but I mean is 400 RMS fine? How about 500 RMS? I know with most subs 200 rms over is no problem but that is 2/3 again the RMS rating on these so I was just wondering... Also, would you classify these as more spl or sq? I know it is probably not extremely high spl or sq but for the price you cant beat it... Im gonna be putting these in a 1cf per sub box with polyfil in it and pushed by either 300 or 400 RMS a piece... What kind …

I just ordered 4 of the X series 10's to replace a pair of Image Dynamics IDQ 12v2's. I am curious what size vented enclosures have worked well with them. Thanks!

Hello everyone. I'm in the process of building a small budget system and I want to get the Fi X 12" as my sub in a sealed enclosure. It will get power from Crescendo 1000C4(~500W bridged). I know that the recommended enclosure size ranges from 0.6-1.1 cuft but I don't know if I should go with a larger(1.158 cu ft.) sealed box or a smaller one(0.749 cu ft.). I listen to dubstep, rap(eminem) and rock. I want the sub to have good amount of output and produce good lows. Here are the enclosures that I'm looking at: http://www.sonicelectronix.com/item_7589_Sonic-Sub-Box-1H12-0.7-Gray.html http://www.sonicelectronix.com/item_7590_Sonic-Sub-Box-1H12-1.0-Black.html So which enclos…

I don't know very much about the x 12's and i was looking for some input. how do you guys think 4 x12's would sound in a tahoe with a ported box tuned at 30-32 hz with an epicenter? I will be running somewhere between 1500 to 2500 watts to them.

Great company, they really do you right. Not to mention put up with arsehos like myself in a professinal manner! I will definetly be doing more business with Fi down the road!

Which is better? RD Audio Heavyweight 18 INCH http://www.rdaudio.net/heavyweight/heavyweight.htm FI.BTL FULLY LOADED 18 INCH https://ssl.perfora.net/www.ficaraudio.com/...view.shopscript

Let's drop all known FI video's and links on this one soon to be sweet thread so we'll all have access without looking all over man's creation First up Daytona Spring Break Nationals 2007. The settup is 8 15" BTL's dual mags with 8 Kicker 2500's modded I think. Watch this video and then ask yourself what a triple mag should be capable of. This video is very impressive and the owner of the van is none other than our own Shawn Fleming. FI BUILT TO LAST I'll be back with more. Let's see how many you can find. An FI scavenger hunt. 1st place-A cool thread !!!!!!!!!!!! Ready set go!!

I was just wondering if there are any pictures of where the subs are made and all that shannanganes? I just think it would be cool if they had some pictures of it on their website

THE FI REVOLUTION ! I want that Tshirt. Seriously, it is badass and I would rock it to rep FI everywhere.

Anyone else besides me loving their new site?

I need to get more footage and create another video.. I was in a rush this time and everything that i filmed didn't come out very good but this reaction is pretty funny. Fi fans will enjoy!

Hey guys, been awhile since I have been on here to pick your brains. I had my Charger SRT, got it set up nicely, and realized I really dislike cars so I sold it and got a F150, 4 door. Every truck I have had I put a fiberglass lid on the back and did a blowthrough going into the cab. I have always been happy with that, but could never haul anything. In keeping with a truck theme, I am planning on keeping the back open this time. To get a decent amount of bass I would like to rip out the back seat and put two individual seat in there and build a custom fiberglass console running up to the front seat, maybe a little further. So, have any of you tried this or heard a s…

Hi everyone i got my fi bl15 today. i just finished taking out my t215 rockford out of the enclosure and puting my fibl15 in, same amp same everything but different sub was used, results were, both subs sounded same to my hearing, great sub fi i played the same songs i play everyday and i tought as if i had my t215 rockford in the trunk but it was my fibl15, well everyone i just wanted to let you know that both subs are really loud like i said very similar on how loud they can get.

is that site fake? everyone says they dont have one and its fake