General Fi

I was just wondering if anyone has ordered a Fi recently and what the shipping time was like. I ordered mine on the 7th and was hoping to get the build done over spring break which is the 16-20 for me. Thanks

not to be naggy, but here's a reminder that you've got mail. it's titled 12" Fi Q request! i beleive. could ya get back to me please. i know you guys are all busy at Fi making the best products i've ever heard.. so on that note, YOU HAVE 20 MINUTES!........... just kidding. thanks everyone at Fi for amazing customer service and products! *sticks up beer* ziggy zaggy, ziggy zaggy, ziggy zaggy, OI OI OI! good day.

What specs should i use for customizing a box for a Fi Q 12"?

For those that don't make it SMD Here it is. It's a D1 model, in series for the video. They are going in for a recone to change the ohms of the coil. I told my wife we were doing it, i guess she didn't know what to expect. You will hear I got busted. The lights in the house were dimming pretty bad. you can see it in the video. The dust cap was warm and the felt pads had burn marks from the tinsel leads. It sticks really bad but it still works. http://s26.photobucket.com/albums/c112/bag...nt=100_4240.flv after The woofer still stinks. It moves freely, but i hooked it up again to get a reading at my house panel. We have digital meters in our area now. my normal Kwh is betwe…

Is it comparable to the Q or BL? i just want 1 12" sub that will sound nice and still get loud in a ported box. this is my first option. Or i would get 2 12" CV vmax. either would be powered by a kicker zx750.1(900rms) Opinions?

I am trying to send my sub into you guys for a recone, and assuming I should ship it to the general address. I can't get a hold of anyone at your company to verify that this is the address that I should ship my sub to for a recone, and I don't want to blindly ship it out to an address without getting confirmation from you guys. Please let me know, thank you! PS - For anyone that might bring it up, I already spoke with Nick via email and they are expecting my sub once I pay, but I can't pay or do anything yet without a shipping address.

I am going to build my box for the sub before it arrives but not complete it fully until I have made sure it fits etc. Now I need some help with the dimensions. I have this plan who someone sent to me and I am wondering if it should work pretty good. Base is 24depthx24heightx36width port is 5" wide and 27.25" long 22.5" height. Is this correct with 8cu ft box and 1.77 cu ft port? so 8cuft tuned to 32hz? any input? anything will be gladly appreciated.

would i be ok powering one 12" Fi Q with a kicker zx750.1(900rms certified)?

I want some different 15"s that will not neccesarily hit harder than my CVX'S but hit Lower and Sound better... The box will be sealed around 2.4 cubic ft per chamber....can't fit a ported box for 15"s in my car and i already had two 12" cvx's in a sealed box at 33hz and to me it didn't sound good or hit the lows like i wanted... The cvx's hit hard but still not low enough and they lack in sq also So what subs do you suggest will fit my needs?? Thanks

I have a 09 accord coupe. I want this to bump but not rattle like crazy. Which do u guys prefer? I would like a 12 not a 15 lol. Im kinda a noob so any help would be great. Thanks. The trunk space is pretty small.

Which is better? what are the good and bad points of each? can one handle more power? does one sound better? whats the deal? lol

Hey I'm new to this forum but I was considering getting Btl's as my next sub but I got a few questions. I already emailed nick but I thought there might be some members on here that would have enough experience with BTL's that they might be able to help me out. I want to get 2 12" Btl's and was wondering if they could handle 2500 to 3300 watts rms on a daily basis? Im going to have a Kicker 2500 at 1 ohm to each of them. I'm going to be competing with them every once in awhile to but I'll be listening to them on a daily basis more so that comes first. I thought about getting the inner heat sink option and the cooling package. Would this help them handle the extra power on…

i was wondering how muc amplifierpower i would need and whatkind of amp to get?

I sent in a BTL to be replaced and it has been months with nothing sent back. It was said to be in the process of being replaced. The last email that I got back from Fi was on February 11th. I'm just not sure what else to do. My emails for the past month have gone unanswered, and you guys don't have a phone number. Please email me at [email protected] whenever you get a chance.

Hello all, looking for some guidance .. I am considering purchasing 2 FiQ 10's and using a AQ 1200 D to power them.. I am unsure on the options. i am assuming dual 2 ??? I drive an Xterra so i am considering building a box that would fit behind the rear seats following the slanted contour (thin on top to larger on the bottom) with the amps attached to the back of the box... I figure 2 10's because it would look better than 1 but not sure if i need 2.. Any opinions, thoughts, box ideas would be more than welcome.. Definitly looking for SQ and not SPL. dave

i wanna know how the havoc compares to the fi bl. i have the fi bl but im thinking of switching to the havoc. im not sure though because ive never heard the havoc but by reading the reviews its way better than the q. is it better than the bl? how so?

can i max the gain on the saz1500d without breaking the bl? is 1500wats the max wats that a bl can handle? or can it handle a little more? and what can a saz1500d really produce? coz i know its under rated, thanks!

i saw an ad on craigs for 2 loaded btls, and im pretty much wondering if there is any way to tell if there fully loaded or not???

Whats the difference? Also for a mono block amp i should buy a dual 2 ohm fi?

hi guys im new into this forum and i really like what ive seen so far, i just love how you talk about real car audio and real brands.. my name is ricardo and im from mexico, and back here at my country we got a similar forum like this, but its not that big and fancy hehe well, right to it.. i would like to share my car and my instalation with you guys.. ill accept any kind of critics, opinions, hatred, or any kind of emotion my pics cause to yall my sub, a real strange sub in my country, very few has the joy to have one, q15d2.. the ampificador.. US amps XT4000D.. 254 dlls .. really lucky at that price.. my spaghetti Os my tools.. few but efficient.. my dashb…

Can anyone tell a big dfference buy switchin from eD19ov.2 to FiQ18 or Fi Bl18 in terms of sq and overall output? Question# 2 iv'e notice that eD19ov.2 uses a single spider FiQ 18 dual spider Fi Bl 18 triple spider What heck is a spider and what does is do? btw power and space is not an issue and i will be using ported boxes.

i haven't purchased anything from fi in a bit so i wasn't sure who to ask/bug. Im looking for a price on 2 MT 18 recone Q2 and 2 18" baskets. I was also wondering if you guys have/sell the nice black ca glue and activator? Ill probably be picking this stuff up as soon as i can. Id say a week or so but really depends on funds

I have a 2004 GS300 and my trunk is sealed off from the cabin, and have never owned a car that seats didnt fold down and this cars' doesnt and doesnt have a passthrough through the rear arm rest either.. So this may be a stupid question but will i get enough bass in the cabin of my car? I plan on ordering a 12'' Fi BL dual 2ohm ported probably at 32hz.. 1000w at 1ohm.. Thanks

I received my Fi Q15 yesterday!! I ordered it with the BP option and a Red dustcap to match my car. This sub looks amazing!! The build quality of this Fi product is better than that of other brands. I was really impressed with the multi stranded woven tinsel leads. I cant wait to install it this weekend. I am finishing up my box (4cf @ 30hz.) and will be running a Cadence iA7 in a 07' Chrysler 300C. I'll make sure to post pics when completed. Thanks to everyone who helped me make my decision and especially to Scott and the crew @ Fi!!!

Im looking to install new sub woofers in my for explorer. I have $1100 for a amp and the subs. I have been looking at the Fi q's 15's and right now im a little confused on what I should be looking for. I am looking for good loud deep bass that will wake up my neighbors. Any suggestions would be great as well as box sizes and ported/sealed.