General Fi

I received my Fi Q15 yesterday!! I ordered it with the BP option and a Red dustcap to match my car. This sub looks amazing!! The build quality of this Fi product is better than that of other brands. I was really impressed with the multi stranded woven tinsel leads. I cant wait to install it this weekend. I am finishing up my box (4cf @ 30hz.) and will be running a Cadence iA7 in a 07' Chrysler 300C. I'll make sure to post pics when completed. Thanks to everyone who helped me make my decision and especially to Scott and the crew @ Fi!!!

I want some different 15"s that will not neccesarily hit harder than my CVX'S but hit Lower and Sound better... The box will be sealed around 2.4 cubic ft per chamber....can't fit a ported box for 15"s in my car and i already had two 12" cvx's in a sealed box at 33hz and to me it didn't sound good or hit the lows like i wanted... The cvx's hit hard but still not low enough and they lack in sq also So what subs do you suggest will fit my needs?? Thanks

Hey I'm new to this forum but I was considering getting Btl's as my next sub but I got a few questions. I already emailed nick but I thought there might be some members on here that would have enough experience with BTL's that they might be able to help me out. I want to get 2 12" Btl's and was wondering if they could handle 2500 to 3300 watts rms on a daily basis? Im going to have a Kicker 2500 at 1 ohm to each of them. I'm going to be competing with them every once in awhile to but I'll be listening to them on a daily basis more so that comes first. I thought about getting the inner heat sink option and the cooling package. Would this help them handle the extra power on…

i was wondering how muc amplifierpower i would need and whatkind of amp to get?

I sent in a BTL to be replaced and it has been months with nothing sent back. It was said to be in the process of being replaced. The last email that I got back from Fi was on February 11th. I'm just not sure what else to do. My emails for the past month have gone unanswered, and you guys don't have a phone number. Please email me at [email protected] whenever you get a chance.

Hello all, looking for some guidance .. I am considering purchasing 2 FiQ 10's and using a AQ 1200 D to power them.. I am unsure on the options. i am assuming dual 2 ??? I drive an Xterra so i am considering building a box that would fit behind the rear seats following the slanted contour (thin on top to larger on the bottom) with the amps attached to the back of the box... I figure 2 10's because it would look better than 1 but not sure if i need 2.. Any opinions, thoughts, box ideas would be more than welcome.. Definitly looking for SQ and not SPL. dave

went up to chickens AGAIN today.....handled some business and while we were there some girls wanted to get a demo so you know i couldnt say no. sorry to put up so many vids, if your gettin tired of it, please dont click the link :D tried to embed it but it doesnt work.......i dont know how you mods are doin it but the "embedd" link from youtube doesnt work...

can i max the gain on the saz1500d without breaking the bl? is 1500wats the max wats that a bl can handle? or can it handle a little more? and what can a saz1500d really produce? coz i know its under rated, thanks!

Whats the difference? Also for a mono block amp i should buy a dual 2 ohm fi?

i wanna know how the havoc compares to the fi bl. i have the fi bl but im thinking of switching to the havoc. im not sure though because ive never heard the havoc but by reading the reviews its way better than the q. is it better than the bl? how so?

i haven't purchased anything from fi in a bit so i wasn't sure who to ask/bug. Im looking for a price on 2 MT 18 recone Q2 and 2 18" baskets. I was also wondering if you guys have/sell the nice black ca glue and activator? Ill probably be picking this stuff up as soon as i can. Id say a week or so but really depends on funds

i saw an ad on craigs for 2 loaded btls, and im pretty much wondering if there is any way to tell if there fully loaded or not???

I was just reading back on some topics and i think that i dont need the Universal option if i get dual 2 coils is that true? Will the dual 2 coils definitely give me a 1ohm load?

I have a 2004 GS300 and my trunk is sealed off from the cabin, and have never owned a car that seats didnt fold down and this cars' doesnt and doesnt have a passthrough through the rear arm rest either.. So this may be a stupid question but will i get enough bass in the cabin of my car? I plan on ordering a 12'' Fi BL dual 2ohm ported probably at 32hz.. 1000w at 1ohm.. Thanks

I just had my highs and mids installed in the truck and now need a little low end. After getting my first pair of Q's from Fi, I'm a dedicated customer. BTW, they are still going strong, now in my cousin's Explorer. Anyway, my current setup is as follows: 2 Focal 165 KF 2 Focal 165CVX JL 450/4 I'm looking to get something that I can hide under the back seat. Here's what I was thinking: 1 10" SSD RF T500-1bd in this pre-fabbed box CRB07-110/112 LINK: http://www.subthump.com/crb07.htm it's the one at the bottom of the page One concern, magnets must be no more than 6.25" in diameter...will that be an issue with the SSD? I'm a firm believer in building my own boxes, but w…

Okay so i went to Freemans Audio today to give the guy my idea of what i wanted to do with the box. I arrived with the intention of sealing off the trunk and having the sub faced towards the cabin.... the guy said that it would be better to have it in the trunk facing the trunk becuase it would resonant off the trunk, if it fired into the cabin, i would be the first thing it hit... For "my way" wouldnt there be less trunk rattle and it be louder to there ear? versus "his way" would have more trunk rattle and some of the sound would be sealed in the trunk??? I dont have to long before i have to tell them my final plan... tommorow they will most likely start working on it a…

Im looking to install new sub woofers in my for explorer. I have $1100 for a amp and the subs. I have been looking at the Fi q's 15's and right now im a little confused on what I should be looking for. I am looking for good loud deep bass that will wake up my neighbors. Any suggestions would be great as well as box sizes and ported/sealed.

Well this is my first post. This is a great forum I cant believe I havent discovered it till now. LOL. Well here is my story... I had a Kove Armageddon ZM 15" in a 2 cu FT enclosure in my F-150....well Since then I have moved on... unfortunately without a speaker system in my cars. I have a 2008 Mazdaspeed3 and I am planning on getting a 12" sub and setting it up in the floor of the hatch. (Ill be taking my spare out... Thats what AAA Platinum is for) Well here is my question. I want the sub to hit pretty hard but I prefer SQ over SPL. My idea is to build a sealed enclosure in the 1.2 cu Ft range for one 12" Fi Q w/ the BP option but the dilemma I have is that I have …

i just ordered my 12'' Q w/ the Bp option. I have a hifonics bxi1208d and i was wondering if the sub is going to take more power now that i got the option. I mean the option was free so i thought why the heck not. Is it going to be underpowered? I know hifonics is overrated but i dont have the cash for sundown, audioque, ect. thanks for the help!!

Met up with Edgar today at the Gigante flea market, and I got a chance to make a vid with the new phone finally. It really doesn't do justice but it's better than the last video I had!

i have finally landed on fi as my sub. now i want (2) 18's and i am working with about 10-12cubes in my trunk. they will be powered with a zx2500 and ample electrical. i want to try a new sub so this is what my infatuation with 18's is. i dont think that the bl's would satify me but have also heard that powering 2 btl's with only 2700 watts would be a waste. i want to get the most bass possible from my setup with what i have and want. what would be the best suited sub for me considering that i want 18's?

there is someone selling a btl on ebay right now. how do you know what sub you are in fact getting options etc? does the sub have it name indicated anywhere on the sub? and now that i think about it he is on the forum. wonder why he isnt selling it here

I'm going crazy. My Q should have shipped on the 20th according to my UPS quantum and it still hasn't. I mean, it is all I have left to do my install to make my car go from sounding like to :bigclap: It's driving me crazy! Need....good...music!

does anyone have any suggestions on box size for 2 12" BTL's. it'll be in the bed of an s10....

hey guys..i will just get straight to the point..... Is 4.4 cubic for a fi bl 15'' too much??? It has the P_Chamfer opt only... dual 1 ohm will be wired to 2 ohms on a MTX TA81001... oh and its tuned to 31.16 using re box calculator