General Fi
3,081 topics in this forum
-
Hey guys hows it going? I was hoping that ya can help me out. I currently have a daily/SPL setup in my car. I am bumping a pair of Kicker L7 12s with a Alphasonik amp that is feeding them a 1,000 watts each rms. I love my subs but I feel that I need to upgrade. My subs work great in the USACI lanes and I have gotten a offical 148.5 db with them. But I can not use them for daily use. After about 10 -15 I start to smell burnt coils ( Kicker L7s are only rated at 750rms each). So I am looking to get a pair of 12" BLs. My qustion is; what options should I go with in making this sub? Can I use my current box? It is tuned to 30hz and 4.5 cubic ft for each sub. I am not a hardc…
-
0
Reputation Points
- 12 replies
- 928 views
-
-
So I've been bumping two American Bass XD 10's powered by a mmats 1400.1 amp. I think I just burned up one of the subs so I obviously want to replace. I want something louder. My system hit 153.2db and that's with two 10's. I like American Bass's products but the VFL's are 1500wrms each and I don't want to buy another amp. I'm looking at the Fi subs and specifically the IB3 12's. Anybody have them? They're 50wrms each more then XD's (500wrms each). The amps 1400wrms @ 1 ohm so I don't want anything that's more then 650wrms each. Reccomend another sub? Thanks =)
-
0
Reputation Points
- 4 replies
- 690 views
-
-
-
Ok guys background on my truck 2006 chevy trailblazer ss alpine pdx 1000/1 amp my subwoofer box is ported and has these specs 2.0 cu. ft. Total Volume Slot-port tuned @ 32Hz Double-Faced Front Baffle (For added woofer support!) 11" Round Cutout Dimensions (W x H x D): 30" x 13.5" x 16" I currently have a 12w6v2 jl subwoofer and would like something that would pound harder than that. also what does the folling things do next to the subwoofer Configure Speaker: Ohm: dual 1 dual 2 (ok i know this one) P Chamfer: no yes ??? Cooling: no yes ??? Flatwind: no yes ??? Daily or SPL: ??? Extreme Lead: ??? Universal: ???? Quantity: Any info is apprecia…
-
0
Reputation Points
- 13 replies
- 1k views
-
-
Im looking at purchasing two BTL15's and I'm leaning toward the Sundown amps. The SAZ-3000D is rated at 3000RMS and I've read that it's underated at that. Is this amp too much for a fully loaded BTL15. I plan on strapping two 3000D's to two BTL15's at 2ohms which should be 3000w per sub.
-
0
Reputation Points
- 11 replies
- 990 views
-
-
my buddy is goin with a 12inch fi ssd d1 fw coil, bp power, would it be worth upgrading to the 1608d or will the 1208d be jsut fine?
-
0
Reputation Points
- 18 replies
- 1.3k views
-
-
is 1100 watts at 2 ohms too much for a 12in d1 ssd? with bp power.
-
0
Reputation Points
- 35 replies
- 3k views
-
-
Alright Ive heard nothing but good things about you guys, and going to start saving up for my system and plan it out now. I have a 1993 camaro. Now my biggest dilema is my trunk, they are fudgeed in camaros.. I want a system with a little of box SPL and LOUD SOUND QUALITY... I want it to hit pretty damn hard and hit lows...but I also want decent sound quality. My choice right now is either between 2 12 BLS or Q's... Now if I can find anyone to build me a box or give me a design with dimensions for a camaro trunk ill go ported. But for now im stuck buying a box from these guys which only come sealed with 1.0ft per sub for 12s. http://www.subthump.com/acamarowell.htm And w…
-
0
Reputation Points
- 11 replies
- 940 views
-
-
I ordered last Monday the 22nd and I just got a tracking number in my email. Does this mean they shipped it out or what?
-
0
Reputation Points
- 5 replies
- 577 views
-
-
i'm looking for the specs for the old btl fully loaded with the 3 mag
-
0
Reputation Points
- 7 replies
- 1k views
-
-
i'am planing on buying a FI Q. i' am just worried because i will ship it to another country and i might have trouble with it if it has a defect or when it gets broken. does FI get this kind of problem? wherein the costumer returns the subs because it has a defect? or you just get this once in a while?
-
0
Reputation Points
- 7 replies
- 779 views
-
-
the BL costs $244 and it will be shipped to anaheim ca. i just want to make sure about the cost, will the $244 be the total cost? or will there be addt'l payment needed?
-
0
Reputation Points
- 2 replies
- 727 views
-
-
will i need an extra bat for a 12" FI Q, and the amp is dls a6 mono amp, about 1000 wats rms. my current bat is a bit small because my car is also small, lol. Thanks in advance!
-
0
Reputation Points
- 8 replies
- 826 views
-
-
2 18 fi btls 2 sundown 3000ds, iraggi 260 amp alt, 2 kinetik 3800s, 4/0 grounds, 2 runs 1/0 power wire optima up front.
-
0
Reputation Points
- 5 replies
- 886 views
-
-
HI im a newcomer to fi i wanted to know wich fi speaker would be best for me. i am a daily driver no competions and i listen to everything. Somone told me to get the bl but wanted a wider opinion!! ps. i have a regular cab truck and i seen ppl put em behind the seat wat is the debt counting speaker and box ( dont trust spec. from past experiences)
-
0
Reputation Points
- 11 replies
- 1.2k views
-
-
-
what is the # to FI ;I need to order two 15 inch fi BTl fully loaded recones so if some one can help me out that would be great! thanks
-
0
Reputation Points
- 2 replies
- 626 views
-
-
Hey, I'm planning on buying a 12'' Fi Q sub, and I was wondering what type of box would be good for me... I have a polk/momo c500.1. I was planning on getting the dual 1ohm to run 500rms to the sub. I'm looking for good SQ(obviously why I'm getting the Q) but I want to be able to feel that chit in my back if I want to, lol. It's going in an older 4DR BMW. Any help would be appreciated, thanks. If you need anymore info, I'll answer as best I can.
-
0
Reputation Points
- 6 replies
- 898 views
-
-
Hey Yall well as the tital states i have 2 12" 07 Blz fully loaded with power upgrades cooling etc so how much rms exctly ish are they and what sort of power can i run into them i want to use 5000wrms (tru 5000wrms) with low gains or will i be better of using 2 2000wrms amps 1 to each sub i dont want to blow them but i dont know how much they will take any thoughts or suggestion thanks peeps bring the BASS xMplar
-
0
Reputation Points
- 9 replies
- 1.2k views
-
-
I'm wondering when to order my 15" SSD. I want to order it after Christmas I figured just wait until the 29th, the Monday after Christmas. ???
-
0
Reputation Points
- 4 replies
- 678 views
-
-
Need a solid amp, roughly 4-5000w, around $1000 to power 2 18" BTLs. Ideas? What electrical am I going to need? Can I get away with 1 HO alt and a few batteries?
-
0
Reputation Points
- 4 replies
- 824 views
-
-
I had 2 15" alpine type r's and now im looking to get 2 15" FI BLs but i only have enough room to do them sealed... i cant find that extra room that pored boxes need. so can i keep 2 of them sealed? and how would they compare to the alpines?
-
0
Reputation Points
- 61 replies
- 4.9k views
- 1 follower
-
-
First post go easy -just kidding you can be brutal if needed. I have been curious as to the Fi product and have always wanted to hear and see 3 12's across the rear seat opening of my mazda 3 06 there is enough room and the boxes are built. you build it they will come. I am not happy with my box size but well in range at 1.1 ish after displacement each, there are 3 seperate boxes it was the only way to get in. I may redo the boxes to achive more like 1.3-1.4 after displacement but unsure as of now. each sub will have a 1000 watt amp on each. i plan on crossing over the middle sub at 80hz range and the 2 outer subs at a lower hz to be determined maybe around 40-50 hz to c…
-
0
Reputation Points
- 9 replies
- 1.4k views
-
-
Hey I need to buy 2 bl 18's... and was wondering how long the wait is and also how I can get in touch with you guys. Thanks
-
0
Reputation Points
- 9 replies
- 869 views
-
-
are you guys shipping international? if so.. can anyone send me information on how to order 15" fi BTL? needs some advice..
-
0
Reputation Points
- 3 replies
- 725 views
-
Who's Online (See full list)
- There are no registered users currently online