General Fi
3,081 topics in this forum
-
Does any one have a design that they could /would share for a single BL slot ported at around 30hz? Thanks all! David
-
0
Reputation Points
- 2 replies
- 711 views
-
-
What up guys! I know I have been a pain trying to plan my setup, been doing it forever and a day now, lol. For the longest time I didn't heed many of your warnings, but tonight for some reason all your warnings hit me. I was thinking of jumping from my two little 12" RF P3's to 2 15" BTLs fully loaded. Money, time, patience, and the willingness to upgrade wasn't my issue, it was the BIG jump factor. I don't think I am ready to take such a huge jump from two weaklings to two way above monsters....so instead I'm gonna go with 2 15" BL's. I am greatly appreciative for all the help that you guys have provided me and look forward to picking your brains soon for mids/high…
-
0
Reputation Points
- 6 replies
- 835 views
-
-
I was on a plane from Montana and landed in Vegas so I could drive home to California and thought I would drop by and see where Fi was so I stopped at barnes & noble to get a thomas guide so I could find the location of Fi. I found it, but being the monday of a holiday weekend, I didnt get to see much. I didnt think Fi would of been there for the holiday so, it wasnt any loss for me to try driving through Vegas anyway. At least I know where it is now if I happen to swing by in the future. I'm sorry if this was a teaser, but I thought some might enjoy reading about what I did.
-
0
Reputation Points
- 1 reply
- 612 views
-
-
when i go to the FI site, goto speakers, click the BL series, nothing shows up. The rest work, just the BL. I want to order my new subs but...
-
0
Reputation Points
- 4 replies
- 848 views
-
-
i bought this chevy asto last june. this demo car will join the Manila Auto Salon 2008 @ SM Mall Of Asia and IASCA IDBL on Nov. 2008 this is the one responsible for my car paint and airbrush astroboy make over. what's this??? sundown and fi logo DC and FI logo(that's me on the right)
-
0
Reputation Points
- 2 replies
- 710 views
-
-
Alright guys ive read many of the forums on here and i have a pretty good idea on what im getting. But there is a lot of stuff im confused on..Here is what i know i am getting for sure: FI BL 15 inch sub Refurbished Sundown 1500D amp from www.db-r.com Wiring:http://www.knukonceptz.com/productDetail.cfm?prodID=KLM-AK0 KLM 1/0 Amplifier Installation Kit (60A fuse type) ( Is this the right wiring i should get? I saw people say to get the 1/0) Now this is where i get confused... Box- i know i want a ported box, i was going to get my friend to make it. He has experiance making boxes..Or should i get a professional place to do it ( costs way more money though) these were the…
-
0
Reputation Points
- 10 replies
- 1.2k views
-
-
I was just curious if anyone had a High resolution image of the Fi symbol. I'm considering getting a hat made and i cant find a big enough picture of the Fi Logo. or if anyone knows where i can get a fitted Fi hat that's cool too thanks
-
0
Reputation Points
- 8 replies
- 1.1k views
-
-
Hey, my first post on the board! I like it so far and I expect to be posting a lot more on this forum. I'm very new to car audio, I just got my first set up about 2 months ago. I hahve 2 12 Ultra Linear Subs and 1 1000 XA Eclipse amp, yeah nothing great ( All for sale) My new set up I wanna go with a 15 BTL. I was wondering If I could get some advice from some of you with what I will need to get this sub to reach full potential Amp,Battery? Capacitator? etc.. Thanks guys, and great forum!
-
0
Reputation Points
- 19 replies
- 1.6k views
-
-
I am almost done my setup on my corolla 98 and I just wanted to thank everyone in these forums for helping me put this thing together. I'm running a fully loaded bl 15 off a sundown saz 1500d (3.7 cubes net volume), i have 4 cdt cl series components with the upgraded tweets, my headunit is an alpine 9886 and an sax 100.2 should be here through the mail this week (temporarily while sax 100.4 become available) all my wires and fuses are from knukoncepts. I have never owned a soundsystem myself,but I have many friends who have them and just this year i caved in and decided i needed to buy a top notch soundsystem without paying big dollars for a brand name. I've been slowly p…
-
0
Reputation Points
- 8 replies
- 762 views
-
-
i need a little help with my set up. ok. I drive a 1998 cadillac deville, Phase linear uv8 head unit. Im getting a fully loaded 18" FI BTL and a rockfordfosgate T2000 amp. I have a yellow top under the hood. I will probly get a kicker 1/0 wiring kit or some other 1/0 wireing kit. What eles will i need??
-
0
Reputation Points
- 11 replies
- 1.1k views
-
-
Whats a better amp the (this is for one Fi BTL 15) Sundown Audio SAZ-1500D Or HIFONICS BXi-2006D (BXi2006D) MONO 2000W BRUTUS Series AMPLIFIER I was thinking the Sundown but i heard other people saying Hifonics.
-
0
Reputation Points
- 10 replies
- 909 views
-
-
Sold my Current system this pas week, along with a old fender amp, and cashed in some savings bonds, brought me out to 1124$ I have spent about an hour to 2 hours picking out what I'm gonna get and I've pretty much narrowed it down after looking over multiple options and I've finally got it down pat! Subwoofer: Fi BTL 18" fully loaded Amp: Massive Audio P1500.1 3000W Class D Pro Series Amplifier Capacitor: SPL CP5.0 5 Farad Capacitor In all left me with 179$ which, I honestly didn't think I would come out with that speaking shipping etc. So, I'm hoping to use that to buy a box or have one made, so tell me what you think!
-
0
Reputation Points
- 35 replies
- 3.2k views
-
-
I understand there is a backlog of BTL orders. What timeframe am I looking at to see my sub so I can have the rest of the system ready for it? Can't wait to be up and running again, excitement building...
-
0
Reputation Points
- 7 replies
- 880 views
-
-
Ok so this is what im getting Sub: Fi BTL 15 inch, All the options cept cooling cause i got p chamber (it said not to get cooling if you got that so i dont know lol) And its Daily Amp: ROCKFORD FOSGATE T1500-1BD (T15001BD) MONO 1500W POWER Series AMPLIFIER Component speakers: KICKER DS680.2 (DS6802) 6" x 8" 90W And a 1/0 gague wire and a Capacitor (ROCKFORD FOSGATE RFC10HB 10-Farad Digital Hybrid CAPACITOR w/ Digital Readout) Would this hit hard enough to shake the chit out of my van? And i know your going to tell me to get a battery but i just want something small and light and not take up so much room. So you cant talk me out of getting it lol.
-
0
Reputation Points
- 22 replies
- 1.9k views
-
-
Ok i was building fiberglass console for my 12" BL to be run off saz-1500d. Now I havent even taken anything out of box or used any of it yet, and probably trading vehicles this weekend. Now I will be putting stuff in 97 expedtion. My sub is BL 12" with most options except spl and flatwind. I have plenty of room for whatever in this vehicle, so i will probably sale the 12" BL. If i wanted to run some 18" Q's, how would 1 saz1500d run both of them, or should I just get 2 BL 18s with 2 saz1500ds? If i didnt already have my amp, i would just buy 3000d. I have kinetik 1400 to go up front and 1 2000 kinetik now for the back. Let me know any other suggestions also. thanks
-
0
Reputation Points
- 2 replies
- 1.2k views
-
-
so i was hoping to order a pair of btls this friday and went to go check out the website ordering, and am unable to put a canadian address in, i emailed for a shipping quote last week but have yet to be responded to.. any help would be appreciated -thnx
-
0
Reputation Points
- 4 replies
- 975 views
-
-
Sorry for the trouble, I am just wondering how might I order from Fi Audio's site? Do I email them with my order or what? Appreciate the help. Thanks, Dover.
-
0
Reputation Points
- 18 replies
- 1.7k views
-
-
As of late I have no time for the forum right now between my research job and school and tons of other things going on I simply no longer have time for this. Many other things are needing my attention and the forum has to take a back burner for me for a while. I'll be around periodically, but don't expect a quick reply to anything from me...I am not picking posts to go through or holding bias to anybody by replying to a thread here and there, i'll have a minute here and there and reply to and that's going to be the extent of it. Sorry if you feel that it is not fair... The best bet is to email me and I can help through there more efficiently, other then that pretty much e…
-
0
Reputation Points
- 2 replies
- 732 views
-
-
Are there any numbers? Street Classes, Street Max, Super Street and maybe Extreme? For example: Competitor name, vehicle, number and models of subs, electrical system and THE SCORE
-
0
Reputation Points
- 13 replies
- 1.7k views
-
-
in order to get my subs to trinidad..i was gonna ship them to trinidad but it would cost 100 on each sub or i was gnna ship to my cuzins in ny and them let them ship it to me..............either way.a lot of traveling and im guessin a hella lot of bumps along the way.......can the subs take it or does the packaging take care of it.......is it in a wooden crate cause i never saw in any pics??help much appreciated.
-
0
Reputation Points
- 9 replies
- 1.2k views
-
-
im looking to change my setup. if i go the bl route, my box cuft will be 5-5.4cuft total including port area. if i go btl route, the box will be about the same total. they will be powered by a zx2500 which in the birth certificate says 2700 (if that matters) now i want to know which will be louder. this will be for daily use in my dodge charger. i currently have 2-15" L7's sealed in a 4.2cuft box and it pounds, but i just want to change it up. plus, i have a feeling that i can get louder than it if i go the FI route. thanx im also open to other suggestions.
-
0
Reputation Points
- 1 reply
- 781 views
-
-
I'm about to order a Fi 18" and was wondering, (and this may sound dumb) If I needed to add these and what they where; P Chamfer, Cooling, HiXmCoil, Induct Heat Ring, Universal. Would appreciate the help a bunch, Thanks, Dover.
-
0
Reputation Points
- 1 reply
- 716 views
-
-
amp is a orion 1200d, space aval is 4.00 cuft listen to 95% rap music so which should get louder and hit lowest 2 12'' si bm's or thje 15'' bl?
-
0
Reputation Points
- 2 replies
- 893 views
-
-
the cap on my 18" btl has a dent on it and i need a new one who can sale me 1?
-
0
Reputation Points
- 4 replies
- 834 views
-
-
wich is the best glue for reconeing and where can i get some
-
0
Reputation Points
- 8 replies
- 1.3k views
-
Who's Online (See full list)
- There are no registered users currently online