General Fi

I got a 350Z recently and I'll be redoing the entire sound system using mostly parts I had from prior systems that I took apart years ago. Long story short I'll be building a fiberglass corner box, sealed, about 0.5 cuft and I can put a 10" sub in there. The FiQ10 seems to fit the bill with the limited space I have and the amp I have laying around (Directed 1100d, used it to power an RE SX15 that I need to sell still) So I'm guessing the Q10 with BP Power just to be safe and I should be good, right? Front stage is going to be CDT M6i components (M6 mids, DRT26 silk tweets, EX-560 crossover i *THINK*) in door pods that I'm gonna make, tweets probably in stock location., po…

Ok, I got home this morning to see a sticker from the fedex guy because no one was home. Do you guys know if they ship UPS or fedex? Im trying to figure it out before I drive 20 miles to the fedex warehouse lol. Thanks

this is mainly to anyone who works at Fi car audio....my name is travis mislyan and i have placed an order about 2 weeks ago and recieved all my info to my email and ups is notification is not saying nothing and i know my funds have cleared so im wanting to know whats going on i think i should have recieved my sub by now....

i got a re mt motor that has a shifted top plate. can i send it to you guys to align it, and on top of that, have you guys recone it back to specs? i already got a 12 spoke basket and ill be willing to send that in for minor but minor cleaning. thanks

since fi makes such wonderful and accurate woofers are you guys working on mids at all? i would surely purchase these without hesitation.

Installed a BL 12 last night and I was wondering how long does this thing need to break in before I can play it loud? Thanks. All the gains are pretty much down.

Wanted to announce this new skin in your section. To all your die hard Fi fans, thanks for joining SSA! Screen Shot of Fi's new skin

A while back I posted a topic about one of my subs having a softer suspension than the other and I knew this would happen because one was bought like several weeks before the other but figured eventually they both should level out to have the same stiffness of suspension but that isn't the case. After doing some testing last night a couple of buddies of mines who happens to be a serious competitors bought it to my attention and said it may cause somethings such as cancellation or something then again it may be nothing but you never know. Again I have bought this up to FI and said it would be fine and eventually level out but I am worried that one of the subs may have a be…

is paypal safe from hackers? im not familiar with paypal, but i know that its risky when you give your creditcard number in the net.

i was cleaning my truck and my 4 way fell off my folded up 3rd row seat and put a 1inch hole in my dust cap. does anyone know if fi will sell me a new one? the sub is a 18" ssd ? i just emailed them also

First off, hello, been lurking for awhile finally decided to post. I need some help. I want to add some subwoofers to my car. I am going to start with 1 sub, would like a 15, but possibly a 12. I have searched high and low to find something I truly like. First problem is, I have only heard 13w7's in the same car I have. I don't want to drop that much per speaker and I don't want something everyone else has. I have been leaning towards the 15"BL. Amps, I have access to kenwood KAC-9103D for cheap, but no sure I want that either, because I think I would have to have 2 to push the BL. I seriously doubt they come close to the 1800 watts they claim. No one around her…

How much is a 15" dual 1 Fully loaded BTL Recone + basket and gasket shipped to 33027

Will a fi audio ssd18 with a flatwond coil and bp power take 1600 watts daily? I would do a btl but that would be underpowered. if the fi can't take it, has anyone had experience with a 18" jaugernaut?

I've been waiting for almost TWO weeks to see the BTL Recones back up on the site. What is going on here?? I have several competitions that is just going to go past me and nothing is happening with the BTL service. I mean I really like the subs but the service for BTL that i've been receiving is very horrible. Im on the verge on switching over to RE and purchase the XXX's. Can someone please give me a answer on these Recones for the BTL's??

got a big boner right now cant wait to get that beast in... igot the dual 1 flatwind,cooling,daily option... someone told me the d2 was better than the d1 just because the d1 has 1000rms and the d2 has 1500 how tru is that ? i know you got more wiring options with the d2 but it cant be that bad right?? anywho im going to be running at least 300 maybe 500rms over ,would you guy consider going over rated rms???

Ok, im looking into get a pretty nice system, but i cant decide on which sub to get.. 1. new orion hcca 15" OR 2. 1 fi btl 18 was going to run them on a hifonics BXi 2607D at 1 ohm.. what you guys think, im kind pressed for money.

quick ? This is the first sub that I'm planing to purchase that has the option Dual 1 or Dual 2. You know most sub are Dual 2 and Dual 4 . Im planing on getting a BTL 12, only one and wire it down to 1 ohm. I usually get Dual 2 , So do I still choose Dual 2? and How do you wire a single Dual 1? Thanks

anybody know some good software i can use to make enclosure plans?

ok im looking to get a present for my brother he wants a sub thats big so i think im gonna go with the 18 he has a 2002 galant and is willing to give up his hole trunk to fit on in there he has a phoenix gold 15.1 says 1000rms at 2 ohms would this be ok to put on a 18SSD without any of the options added

I know this has been gone over, but i was just wondering how a single 12" BTL ported at around 2.5 at 32hz...would stand up to two 12" RE se series sealed in 2.5...on an aq2200d. Could i expect any sound quality? any other things you need to know...just let me know. i also thought about inverting the BTL...any concerns or comments on that would also be helpful.

can i max the gain on the saz1500d without breaking the bl? is 1500wats the max wats that a bl can handle? or can it handle a little more? and what can a saz1500d really produce? coz i know its under rated, thanks!

I'm probably going to get a Bl 15 soon so i was reading the "tech" section on the fi website about the BL's. One thing i didn't understand is why they said that they recommend getting the P-chamfer option when they don't even offer it for the sub as far as i know. If you look at the bl's that option does not show up.

Well, I am making my own "Fi Car Audio" decals for my windows and I need a pretty big copy of the Fi logo. The decal is 6x4 inches. Scott can you give me a copy of a big sized one?

need to finish up my system before it gets cold i need a good amp to power 2 15 ssd and at a fair price can't afford to break the bank