General Fi

What is the best way of getting a hold of Scott? I tried calling but it goes to voice every time. Thanks Jybfan04

I had been searching the market and looking for a non-fanboy sub that was loud (I mean LOUD) but could fit in with an SQ setup and stumbled across a forum where I was first introduced to Fi. After some deliberation I made the plunge with a fully loaded Fi BL 12 and I could NOT be happier! Customer service via email is on point. Best of all its made in the USA (even by today's standards that doesn't mean much, but if at least one person in the USA put the sticker on it that said "made in USA" thats at least 1 job still in our country ) I digress... this SUB F'n ROCKS! PUT IT IN THE RIGHT ENCLOSURE!

Hey everyone i have a 15" bl loaded and am needing a new box. i recently got a 2006 Jeep grand cherokee 4.7l (new body style) and im looking to get a new box for it...my box is kinda banged up and a bit small since i had a honda accord...im not much of a carpenter and i was wondering if anyone had a good box for my Fi bl 15"?? around 3-4cu and tuned to 30-35Hz?? i am putting 1500w daily to the sub. or if anyone can build one for me!!! i have looked all over the internet and there either crap from bestbuy thats not up to par for the BL or not tuned right! so please email me!! shipped to 66209 Thanks!

well had to rebuild the box for the BTL the lash one shall we say sprung a leak and without much testing was able to do 144 on street beat and take first by 2.5 DB or so. what a combo a beetle and a BTL thanks for makeing this sub.

How much does it cost to recone a Q. the surround is ripped and is also seperated from the cone in that spot.

Hey Scott, Are the specs the same on my subwoofer, power handling wise? Is it still 1000 rms or is it more now? I'm trying to figure out the right voltage so I can set the gains on my amp with my DMM. Oh and the shirt is awesome, thanks alot for the shirt and the stickers.

i need to order just an 18" 12 spoke basket is there anyway to do that??

https://ssl.perfora.net/ficaraudio.com/sess/utn;jsessionid=154e941f8341dcc/shopdata/links.shopscript BLK MARKET MOB More Pics comeing soon...If you have 'em post them up.

A simple question, maybe not a simple answer though. I am looking to (maybe) invert my 15" BTL when I get it. The whole reason why I want to do this is to give the woofer as much air as it wanted and to use the trunk as the entire box. Saving room would be a plus but isn't really needed. I know some subs simply cant be mounted this way. The more I think of it the more I actually think the BTL may not be able to. Dont think though that this will make or break me getting a sub, just an idea.... http://www.astinagt.com/forums/showthread.php?t=5601 (some guy posted a program to help with box cubic feet calculations)

is Fi planning on releasing any new subs or any new options? just wanna know if i should wait a lil bit for something new to come out or is it safe to say nothing new will be out for a little while so i wont feel all sick when i order my sub and something new comes out

System: Alpine 9857 Avt 911 JBL bpx2200.1 JBL gto1004 (2) Fi BL 15" (2) Focal VR165 (2) optima engine battery kinetik hc1400 (2)

Would it be better to get a fully loaded bl or q? Sundown says the new 1200 is capable of closer to 1400 given you have the electrical to back it up.

FI WILL BE HERE...... WILL YOU?

When I play certain songs and music for long periods of time my dust cap get pretty warm, i know you are suppost to smell a glue smell at first but its been about 3 months since ive had my q's and i still smell glue... ive had it oscillioscoped, what else could cause this? the two Q's are on 2 Alpine Pdx 600.1 Anyone Have any ideas as to why this might be? any comments would be truly appreciated

I was wondering what does the "FI" in FI audio stand for? Thanks for any answers.

Also which sub would be best to get for an overall better sub? The fully loaded BTL18 or the RE MX18? the mx looks mean but both seem like good subs.

So i'm in the middle of building my box, i used torres tuning calculator along with sketchup to design the box, i'm 98% done with it and realized that my Hz may change due to the fact i'm using a center divider. currently my specs are, 2 12in Fi BL's 3/4in MDF Outside Measurements Height-15 Width-34 Depth-20 Center Divider- 18.5 x 13.5 Inner Port Dimensions Height-13.5 Width-2.5 Length-17.75 Those specs give 32Hz overall "if" i use them in Torres Tuning Calculator, now im a little upset cause i think im gonna be starting from scratch again being i added the center divider, if i split the width in half to make up for the center divider i get stuck with 51Hz If …

Hey man, I gotta see some pics of your setup man.....

The foam on the top of the basket didn't have the mounting holes drilled in it. Also, the holes were a tad small for a 1/4" bolt. I saw a thread on here before where someone drilled theirs out to accommodate 1/4" bolts, but I've never heard anything about the holes not going through the foam. Is this normal, or did they just forget to put the holes in mine?

Ok, my friend Want to get a 15" sub. He is think about doing either a BTL or BL he has the hifonics bxi 2008D that he got free from a friend. He wants to feel the bass should he do the BTL or BL? the BL will be getting more power than it need, but will the btl get louder even though it will be underpowered, considering how much more efficient the BTL is.

Now that I'm working agian, I'm ready to spend some of the money I just made... I have a Q10 and talked to Nick a while back about changing the coils from dual 1ohm to dual 2ohm in order to match my sae-1000D better. My question is: since the sub would be in the hands of Fi for the recone to change the coils, would it be worth it to upsize to a bigger cone as well? such as a 12 or 15? I will run this sealed because it is in an extended cab s10. So basically, will going from 600rms to 1100rms make a big difference or not? Thanks in advance, Mike B.

I was just bored in class and a couple things popped into my head that i want some opinion on...i'm a class A noob and i just bought a 15" BTL..anyways i plan on running the sub off a jl 250/1 for the time being until i have enough money to buy a rockford t2k..i know it'll be underpowered as hell but i don't see anything wrong with it lol (i know the gain can't be cranked up so it clips and all don't worry)..but the underpowered sub will still be better than my door speakers that i listen to now since my sub went bye bye haha don't ask.. anyways i'm tight on money being that i'm still a teenager and all .. but nevermind all that sry i just i know there are some expirience…

My payment for my Fi Q w/ bp power was cleared on April 10th. I still have not received a UPS tracking number via e-mail. I used Paypal to make the purchase. Would my location be the problem of this delay? I live in IL btw.

Hey, I'm planning on buying a 12'' Fi Q sub, and I was wondering what type of box would be good for me... I have a polk/momo c500.1. I was planning on getting the dual 1ohm to run 500rms to the sub. I'm looking for good SQ(obviously why I'm getting the Q) but I want to be able to feel that chit in my back if I want to, lol. It's going in an older 4DR BMW. Any help would be appreciated, thanks. If you need anymore info, I'll answer as best I can.

FiQ 18 + AQ2200 at 2 ohm vs AQ hdc3 18 + AQ2200 at 1 ohm really confused and dont know with sub to get because I originally wanted the FiQ for its SQ but for $60 cheaper I can get something LOUDER...but how is the hdc3 18 when it comes to SQ Help would be appreciated