General Fi

What Is new about the new btl? Just wondering

Hey guys, could one of you update me on the situation with my claim with usps you filed for me? Its been I do not know how long exactly but I figured Scott would have heard something back from usps by now. I know they take forever, I went down to the office I shipped the motor from and asked how long claims take, the woman just handed me the paper to file a claim . Anyway, if you guys can't remember I am: Sean Burnette and I mailed a Konaki motor to Fi through ups which was lost, Scott filed the claim for me and said he would keep me informed or let me know whats up with it. Please let me know when you guys get a chance, thanks guys

Sent two emails havent received an answer, would appreciate if you guys could hit me up. last comms you were working on getting the dual 2 ohm coils as discussed? thanks...

Hi its me again i have another question about what amp should i get for my fully loaded btl not so expensive or who was a btl 18 and what amp are they using thanks.

Ok, so after talking to others, it has come down to these two. I want to compete, probably only ever gonna be local comps. I know i prob will not beat my friends ranger (a wall with RE 18's, cant SX's I think) but I wanna beat these guys the say Kicker are the best subs ever created. At the moment I have a RF4000.1 sitting around I got from a shop that closed down for pretty much nothing. I am doing a blow through in an 08 Ford F-150 FX2. Here is my tough decision. I can run this one amp and push 4 12" BL's or I can get 2 15" BTL's when the new models come out, and when money is good, do even more electrical upgrades and get a 2nd RF4000 for and seperate one RF4000 …

Hi next week i'm starting my build in my trunk with a box for 2 12" SSD hooked to a zx2500.1 The box will be roughly 4.2 cube ft after displacement tuned to 33hz. I have a few questions will I need to brace the inside of the box? How can I brace it? any input is appreciated thx

Does anyone know where I can get a hold of some Fi Decals for my car? Just ordered my new 12 BTL and would like to rep my chit. I would like one for the rear windshield that says Fi AUDIO And two for my back two windows on my coupe that are just the Fi logo Or anyone who can make me one for some money? Thanks in advance!

I've emailed sales@ and nick@, is there some other way I can get in contact? I posted in here a couple days ago on their "we're busy" thread, but no response http://www.soundsolutionsaudio.com/forum/i...st&p=353212 If it were just for me, I'd forget about it and move on, but I'm stuck in the middle of something that I'm already financially committed to and the guy is starting to lose patience. I'm OK with deleting this once it's handled. no need to clutter a forum.

I have a 18" bl and one of my tinsel leads recently broke. How do i go about fixing it? I'd prefer to send it to Fi if possible but am having trouble getting a response. Hopefully scott stumbles upon this. Thanks -Jeff

Wow. that describes it. Last night I heard a 15" btl ran off of 1500 watts and it was so loud. I just ordered a 15" bl on thursday and if my sub gets any where near as loud as that one im gonna be pretty happy. After getting that little taste of fi im impressed.

Can you let me know if my 12'' Q arrived to you? UPS says it got there the 27th, I emailed you on the 30th to verify that is the case. [email protected] Nick Cowan 12'' Q with 2 broken tinsel leads

which would be louder/better for daily..the 4 15s or 2 18" BTLs..

so the UPS man dropped off my new Q15 and now I want to make sure I protect my Q from accidental bumps and scuffs. anyone here use a grill or know one that will fit the 15?

When I play certain songs and music for long periods of time my dust cap get pretty warm, i know you are suppost to smell a glue smell at first but its been about 3 months since ive had my q's and i still smell glue... ive had it oscillioscoped, what else could cause this? the two Q's are on 2 Alpine Pdx 600.1 Anyone Have any ideas as to why this might be? any comments would be truly appreciated

kinda new to FI and this forum. I have a 99 mustang want to do one 15 in the trunk in a 5.5 cf box. i have a audiobahn a1500hct rated at 2000 watts @ 1ohm. my question is can a fully loaded bl handle this or should i get stock btl? i won't be competing in spl comps jus want something to beat on every now and again. btw i will be replacing alt with a 220 amp alt and yellow top under the hood. any advice would be good.

i been looking at this forum for a while know and i see a lot of people asking to get a recone. is it users fault or is their something wrong with the series of sub?. most people say this about the Btl im

Hi guys, I have tried to contact Fi via e-mail a few times withing the last couple weeks, but no response. I would like to get a sub to Canada, and was wondering if it is possible to ship one out to Canada directly. The only options I see in checkout are UPS to the lower 48. I would prefer FedEx or USPS. It is for: 12" Fi.BL Dual2 Cooling ($40) Flatwind ($20) Daily Thanks.

Got about 800 to spend on an amp..need some suggestions..

Everyone will find out shortly! Hopefully by the end of next week to be precise. Specs: (2) 12" Fi SSD's 4cf enclosure, braced and 45'd, 75+ sq inces of port tuned to 38hz Autotek 1900.1D should be close to 2.3k watts @ 14v, Hopefully around 1150 watts per sub. 2 YT G31's 220a HO alt 2 runs of 0/1 I have faith they will, we had 2 SSD's on a SAZ-1500 @ .5 ohm and they took it like a CHAMP. Don't worry, we will have pics and vids no matter what the outcome. If they blow, then I guess it will be time for another pair of BL's.

how long does it take for pay pal to Carrie out a payment ?

so i just bought a jl 1000.1 amp and now im about to buy a fi 12Q. which voice coils should i get and how should i wire it? the box im going to build is 22"w-9.5"d-14"h sealed with 1.186^3 net air space in my tc. sorry for the noob questions, im not very good with wiring.

i 'am new here and i'am i want to know the use and meaning of the additional features of the fi subwoofers the flatwindcoil??? what is it for? coppercoil???? and the BP??? i think the bp is for cooling and increasing the power handling right?? if i will buy an fi do i need to upgrade these stuffs? thanks alot

I used the search feature and all i can find is threads where people want a recone. Questions: 1. Is there a link to something that explains exactly what a recone is 2. What are the benefits? 3. When do you know when you need a recone?

Ok before anyone says it yes i used the search and other forums. I just cant find some of the answers to my questions. Here is everything im workin with. I am tomarrow buying a 00 Nissan Pathfinder, i have all of the cargo area to play with {which is not under 30 cubic ft} just need room for the amp and room for it to have ventilation. My equipment is as follows 1 Kicker zx 1500.1, Kicker 2 way active x-over, 1/0 every where, big three, Audio control overdrive line driver, Kinetic HC 800, and as for a head unit my friend sold my truck for me and i told him not to sell it with the h/u well guess what im in the market for a new h/u nothin more than 300. My dilema is i dont …

Hey guys I have a couple of questions on the 12 Q's :] And this would be my first set up.(I'm a noob) Are this good SQ speakers with good bump to them? What Sundown amp would be good for this? Or if possible what other amps would be good? I was lookin at the Mmats amps.(I heard there really good) Also would the speakers sound diferent if I order them with BP power? I would be getting both for 518 without BP power wich is a really nice price. Also my box would not be that big for this speakers since I have a toyota celica st but I have a friend in florida that makes custom boxes and he told me that if the enclosure is made good like dimensions, tunning etc it will sound go…