General Fi

I just wanted to say that Fi Car Audio has without a doubt the best customer service of any other car audio company i have ever worked with. I would just like to say that i will be recommending Fi audio to everyone i know. Thanks.

I understand there is a backlog of BTL orders. What timeframe am I looking at to see my sub so I can have the rest of the system ready for it? Can't wait to be up and running again, excitement building...

i have two fully loaded 18 btls and just ordered the 3500d from sundown wanted to see if u guys thought one would be enough or should i order another 3500???? any help would be great

Teak and Dee, who produce some of Ice Cubes chit were chillen at Chickens tonite when i was up there......before i left Chicken thought it would be a good idea for them to get a demo here is who they are http://www.recordnet.com/apps/pbcs.dll/art...1/A_ENTERTAIN04 here is the vid: :DLteDrsNpGP4 also can be found on my site in the movie section its a little cleaner then the youtube one.

hi all i was bored, so i thought i'd post a coupla pics of my beloved fi's and my german made esx's that i raved about. they both handle around the same wattage but the fi's are'nt as choosey which box they slam in. some vids later.

I was just wondering if any one could help me out. I was thinking bout getting a Fi bl 12 for my Crewmax. Im going to rip off the back panel behind the back seat and make a sub box with an amp rack. The box it self is going to have 2 - 2.4 cubic foot of airspace and tuned roughly between 30- 33 Hzs. The amp i have right now is a Diamond d6 1000.1 which does 1000 rms at 1 ohm. So i was just wondering if anyone thinks that this would be good or not? And also if the sub would beat kickers subs? Cuz wea i live everyone likes kickers.

Hello, I am strongly considering getting some FI BLs. First, i have to say that i am very impressed with the videos I have seen of what these subs can do. I have not heard any in person, but i also hear the Sound quality is amazing. I have a good understanding of car audio and installs, im no expert. Here is some questions i have: looking at the FI BL 12" "Re: 0.75 Ohms/coil | 1.5 Ohms/coil" what is this? i thought the D1 and d2 options where ohms loads per voice coil? I have made one slight mistake on an ohm load and fried a very good sub, cause my calculations were less then 1/2ohm off. If i buy 2 FI BL 12"s can I safely run a D2 off a single channel amp? Run…

So what should I set my low pass at for my FI Q10 that I am getting ready to install? Its a D1, if that matters and the woofers I am running are 6.5" Rainbow Kicks.

whens a good time for me to contact you tommorow, i wanna get those items i ordered paid for, plus order a few other goodies

ok im looking to get a present for my brother he wants a sub thats big so i think im gonna go with the 18 he has a 2002 galant and is willing to give up his hole trunk to fit on in there he has a phoenix gold 15.1 says 1000rms at 2 ohms would this be ok to put on a 18SSD without any of the options added

i just put my set of 15i bls in my focus' hatch and i just wanted to say that im beyond impressed. i replaced 4 12 w3s and its night and day. great products im very satisfied..thanks guys *]jl xr 6.5 components x2 sets [*]sundown 2000d [*]sundown 100.4 [*]jl tr 5.25 coaxials x2 sets [*]2 15 fi bls ..fully loaded [*]4 kinetik 800s [*]160 amp alt [*]2001 focus zx3

checklist... stock Toyota 60 amp alt optima yellow top orion 2500d 4.72cuft net @ 34hz 5"x14" port area 1 15"BTL loaded. box is built to keep me in stock class, below windows, yada yada.etc. results.........AMAZING!!!!!!! as far as SQ, speaker is stunning, especially for an spl sub. low end is awsome also. will have legal scores and kack panel outlaw scores sometime saturday, Port wars number at last comp was 159.9 littlematt has videos of both my btl and his 12Q. my 15 let me know if you think my truck flexs a lil bit.. o yeah all panels a triple linned with sound deadner....roof, cab floor, everything!!!!!!

I heard about this and was curious as to have it explained and confirmed if possible

How much is a 15" dual 1 Fully loaded BTL Recone + basket and gasket shipped to 33027

I just got my BTL 18 today, it is now installed and even off that old opti 50c, it's louder than hell. It is louder than I thought it would be. The back wall of my cab below the window flexes 1/4 inch, and the slider window is going to break (possibly today). This is one outstanding product. Even if my window does break, I will be satisfied to the top. Thanks Scott and Shawn for assisting me and I definitely look forward to doing business again and promoting the product! A Video will be put up soon.

Hey everyone, I am going to build a box for 2 Fi Q 10's and I would like to know your opinion on the best bex cubic feet and design wise, to get the absolute best SQ, and should I have it sealed or vented? If vented, how should it be tuned for the best SQ. I want these 10's to have a really, Tight, Bass sound.

I can purchase two blown konaki 12 subs for 40 dollars per woofer and was wondering if I could send it in to Fi for a recone or purchase a recone from fi, I know you have to replace the basket as well... but if I can recone them for cheap it would be a good investment I think.... Thank you for any advice in advance ~ jonathon. (oh and these look just like the audioques just as a reference to which subs i am talking about)

Im deciding between 2 fi Q 12s sealed, or 2 15 Qs sealed... If I went with the 15s I would be a little under the space per sub, but which do you guys think would be better to get?

so i want to use it for daily and some contest and either a kicker kx or zx 2500.1 goin to be put into a 2dr sebring so what options should i get and how much will it cost to ship to Wasilla Alaska 99654

when they coming out scott :P im sorry i had to, it was good seeing you and pol again, and nice meeting chris i hope you guys finish up his vehicle soon, did you guys get out of houston before the rain hit?

Scott and Guys My buddy just recieved his Q 12's and one of them was damaged in shipping pretty bad.He was planing to have his instal started at the end of this week.What does he need to do to get this taken care of as quik as possible? Eddie from Wasco

sorry to bug you guys but i just wanted to know whats goin on about my recone that i ordered. I tried emailing you guys for about a week or so and i haven't heard anything. All i know is that the money was taken out of my account. I knoiw ur guys are really busy but i just want to have a lil assurance thats every thing is okay. ITs a XXX 15 recone D2 Kit, that was shipped to Shawn in Florida. Thank you guys and have a good day. Brian

Well I hate to announce it before it happens but since Scott's private message box is full....here is what I sent you. Been awhile since we chatted. I FINALLY got a call from the photographer today to set up the photoshoot for Car Audio and Electronics. We will be doing it this month between the 17th-19th. He will call me tomorrow for the actual time and date and location! I will keep you posted. Yes fellas you WILL be seeing Fi in a featured car, but then again with my chitty luck I will be in the "Choices" section.

I am pretty sure I will be running 4 Q's in my new setup. My big question....what are some good amps to match them up to. I was thinking about 2 amps allowing for 2 subs on one amp so if one amp died on me it would be cheaper to get a new amp. Here is what I was thinking so far: Kicker 2500's>>>allow about 1250 watts per Q (not sure how Kicker amps are, good price though ) RF 2000's>>>>>Love the look of these amps, but they are a little more costly. Sundown 3000>>>Afraid 1500 watts will be to much for a Q. Sexy amp though MTX Thunder Elite 4000>>>No clue at all about MTX, nice lookin amp, would have to run a 2 Ohm load. Any…

Just got a question, trying to find a suitable enclosure that would fit in the trunk of my charger and would be good for 2 SSD12 subs. Would this one work?? http://www.zenclosures.com/Dodge_Charger_Subwoofer_Box_p/chargerrecessface.htm Mounting depth - 9.00" Mounting hole - 9 1/8" for 10" subs & 11 1/8" for 12" subs (Adjustable by request) Total volume of airspace - 2.46ft^3 Adjustable by request (we can only reduce the airspace) Airspace per chamber - 1.23ft^3 -Spencer