General Fi

As the title suggest, can I resell or trade back the 15" SSD I have that is still in great shape for some credit for purchase of a "bigger" and "badder" sub? Looking for 15" BL with a few options and different ohm load. Advice? Input? PMs? Please let me know! Just thought I would post here for Nick or Scott or Shawn to provide input, or tell me to take it to PM if necessary. Bob

In my first post about this you said something about power handling increases. Is that still possible and if so would it cost more money? Also could you check to see if I meet the free shirt requirement? I hope my sub gets there soon bc I cant wait to have it back. Hit me back with any info.

What is the best way of getting a hold of Scott? I tried calling but it goes to voice every time. Thanks Jybfan04

I had been searching the market and looking for a non-fanboy sub that was loud (I mean LOUD) but could fit in with an SQ setup and stumbled across a forum where I was first introduced to Fi. After some deliberation I made the plunge with a fully loaded Fi BL 12 and I could NOT be happier! Customer service via email is on point. Best of all its made in the USA (even by today's standards that doesn't mean much, but if at least one person in the USA put the sticker on it that said "made in USA" thats at least 1 job still in our country ) I digress... this SUB F'n ROCKS! PUT IT IN THE RIGHT ENCLOSURE!

i was talking to scott a few weeks ago about my re-cone's and now im ready to get them and im not getting any e-mails or anything back.

I'm pretty stoked, I finally placed my order for my 15" Q dual 1 about five minutes ago, and I can't wait until it gets here. I've been hearing nothing but good things about Fi.

I would like to listen to a couple of these subwoofers before buying (Q10 and Q12). Is there a dealer locator I can reference, or is there an opportunity to listen at the HQ in Vegas (going there in a few weeks for business)?

hey guys, looking to get a 10" X for my brother, any chance you have some or parts laying around??

i need to order just an 18" 12 spoke basket is there anyway to do that??

recently added a new car to the family and i am looking a new install. i am currently running a 15" aa ava. off of a hifonics bx1000. i have been very happy with both of my products from aa, and seeing as how you guys are going to be responsible for their new lineup you would be the best source of information. long story short, i am looking for a sub or subs that come the closest to the sound capabilities of the ava. be it from the fi lineup or the aa lineup it really doesnt matter. the subs will be going in the gf's 05 grand am. she likes the "low rumbly bass" but also wants it "kinda loud." have a gross of 5 cuft to work with and say no more than 1500 watts for power. h…

https://ssl.perfora.net/ficaraudio.com/sess/utn;jsessionid=154e941f8341dcc/shopdata/links.shopscript BLK MARKET MOB More Pics comeing soon...If you have 'em post them up.

A simple question, maybe not a simple answer though. I am looking to (maybe) invert my 15" BTL when I get it. The whole reason why I want to do this is to give the woofer as much air as it wanted and to use the trunk as the entire box. Saving room would be a plus but isn't really needed. I know some subs simply cant be mounted this way. The more I think of it the more I actually think the BTL may not be able to. Dont think though that this will make or break me getting a sub, just an idea.... http://www.astinagt.com/forums/showthread.php?t=5601 (some guy posted a program to help with box cubic feet calculations)

Im looking for some recones for my mt's I have emailed scott about 2 weeks ago and havent heard back from him. I figured here would be the best place to get ahold of him other than via email. Im looking for dual 2's shipped to my house. And anybody who has reconed some subs what are some tips to doing it? Thanks alot Wes

hey FI crew. been now for about two months that im trying to contact you about an international order, whats up with the delay i dont even have a chance to order the subs ive been waiting for more then a month just for an answer. please update , emailing you has gone useless. thanks Eli.

When i place my order, since I live in an apartment building, I was wondering if you can require signature confirmation so whoever you guys ship through doesnt just leave the sub sitting around the mail room or outside? this way if I'm not home, I can go pick it up and sign for it. thanks

Would it be better to get a fully loaded bl or q? Sundown says the new 1200 is capable of closer to 1400 given you have the electrical to back it up.

FI WILL BE HERE...... WILL YOU?

I was wondering what does the "FI" in FI audio stand for? Thanks for any answers.

So i'm in the middle of building my box, i used torres tuning calculator along with sketchup to design the box, i'm 98% done with it and realized that my Hz may change due to the fact i'm using a center divider. currently my specs are, 2 12in Fi BL's 3/4in MDF Outside Measurements Height-15 Width-34 Depth-20 Center Divider- 18.5 x 13.5 Inner Port Dimensions Height-13.5 Width-2.5 Length-17.75 Those specs give 32Hz overall "if" i use them in Torres Tuning Calculator, now im a little upset cause i think im gonna be starting from scratch again being i added the center divider, if i split the width in half to make up for the center divider i get stuck with 51Hz If …

The foam on the top of the basket didn't have the mounting holes drilled in it. Also, the holes were a tad small for a 1/4" bolt. I saw a thread on here before where someone drilled theirs out to accommodate 1/4" bolts, but I've never heard anything about the holes not going through the foam. Is this normal, or did they just forget to put the holes in mine?

Ok, my friend Want to get a 15" sub. He is think about doing either a BTL or BL he has the hifonics bxi 2008D that he got free from a friend. He wants to feel the bass should he do the BTL or BL? the BL will be getting more power than it need, but will the btl get louder even though it will be underpowered, considering how much more efficient the BTL is.

amp is a orion 1200d, space aval is 4.00 cuft listen to 95% rap music so which should get louder and hit lowest 2 12'' si bm's or thje 15'' bl?

We're planning out and gathering funds for our new build in a 98 durango. We're walling off at the b pillar and basically have more room than we know what to do with. We could really build a box as big as 50cubes if we'll be sitting on 4x18" BTLs tuned to 30hz for daily and pulling an RTA out to meter the wall to find the best high output frequency to tune to(yet to be determined obviously). Amps will be rather 4x rockford power 4000's or 4xMemphis 4000's depending on how money sits. Rockfords are obviously the preferred choice but at a bit of a cost. Since we have the room, should we just stay at a max of 32 cubes or run a larger box? I mean with a 3rd magnet and all t…

I was just bored in class and a couple things popped into my head that i want some opinion on...i'm a class A noob and i just bought a 15" BTL..anyways i plan on running the sub off a jl 250/1 for the time being until i have enough money to buy a rockford t2k..i know it'll be underpowered as hell but i don't see anything wrong with it lol (i know the gain can't be cranked up so it clips and all don't worry)..but the underpowered sub will still be better than my door speakers that i listen to now since my sub went bye bye haha don't ask.. anyways i'm tight on money being that i'm still a teenager and all .. but nevermind all that sry i just i know there are some expirience…

Hey guys, I am planning on trading my single BL 10" to a friend for 2 10" SSD's . I am trading because I just cant come up with the money for a new amp and another BL 10". So I figure, with my current amp (eD 9.1) I would be better off with 2 D1 SSD's. I have a custom built box for 2 10's , but never could come up with the monies to purchase the 2nd BL so the box is just sitting in my basement living room. I am thinking the SSD's would sound great off 1200 watts or 600 each. What I am hoping is that they will be louder than the single BL, I am assuming that with the extra cone area of the 2 that they will be louder off that alone. What do you guys think?