General Fi

What other subs does the SSD compare too??? Just wondering what subs from other companies are comparable to the SSD. A friend of mine who i'm tring to get hooked on fi was asking me...any input would be appreciated.

the box is 6.5 cubes tuned to 36hz with 75sq in of port the box is behind the front seat of my civic sub facing up and port facing forward and it just seems like it isn't wangin...could it be you guys built it the SPL version rather than daily? (i sent an email saying i messed up and wanted it changed and got no update) i mean it could be something to do with the box and the port being forward...let me know thanks im not happy at all with it...we installed my brothers 15in BL and i was blown away its in 5 cubes at 35hz and mine seems like a single 8 compared to it

sorry i dont know but what is the big 3?

i was wantin to know what subs would be the best to do ..i want something that is goin to be loud but not to loud...and what size amp i should do an all that stuff.. if uyall could help me out that would be great... thaxs

I just bought a brand new Konaki 12", I plan to recone it down to a 10" and run a pair daily off my kx2500.1, I would like to get a shipped quote to 26851 for a 10" DVC 2 ohm kit, I would also need a 10" basket and rubber gasket and FI dust cap, I know they are included but I would like to get one with the FI logo on it. I plan to run 1200 watts to each Konaki 10" once I get them reconed, I dont know what coils or kit Scott or FI would use but I need/want something that will take 1200 watts rms, and be good for a daily type install. I tried pm'ing Scott but his box is full, pm sent to NDmustang

hey the other day my friend was moving his enclosure (with sub in it) and it slipped out of his hand and when it hit the floor the motor snapped rite off of the basket. so what im wondering is how much would a 18" basket and a recone kit be for his btl. the motor is daily, and universal... he would like it to be dual 1 ohm. it was fully loaded, 3rd magnet, ect. he wants it to be the same as it was. also he has a 18" 05 re xxx that is messing up and he is wondering about a recone kit for that too. tried sending you guys a pm but inbox is full. any help is vary much appreciated. Thank you. - Lance

what should i do. i dont think i picked the right options, i think i picked extreme lead and after reading on here i doubt i need it...is there any way to change my order. it was ordered on the 8th and its the 12th now

Ugh, where is Fi Mang? Ive been trying to get a recone since December and still have no real responses yet, how hard is it to send me a email with paypal info and a price ya know? did they take a month off or something I need a Recone For a Dual 2 / Fully Loaded / 15" BTL shipped to 03110 Ive sent off Emails to Scott@fi / Sales@fi and Nick@Fi and have gotten little progress, i just want it done and over with ya know? they dont even have a # u can call them at for fast service u gotta send a email and hope they check it in the next 6 weeks

speakers: 2 FI BL15 d2 2 JBL p650c(one on front and one on wall) 2 JBL p652 (rear wall) amp: 1 JBL bpx 2200.1 crown (for the sub) 1 JBL px300.4 (for the front and wall speakers) 1 JBL gto 75.4 (for rear wall speakers) batterey: 2 optima red top box: 4 cubic ft. tune @ 38hz we'll update soon thanks to scott... i'll post some more FI projects from PI FI are doing great here

Sorry for making a post about this, it just seems to get answered alot faster than emails. I got a speedy 10 minute response the first day about sending my sub in, but once I sent it out, I never got another email reply. Some confirmation if you received my sub and if you can fix it/build me a new one would be appreciated. Thanks scott/nick/whoever. Sub is a 15'' BL, Dual 2, fully loaded, has a cracked bottom magnet. -weston ([email protected])

to the guys at Fi- if it makes any difference i will be using this 12 sealed off of a US Amps AX600DE and per Flakko will push 800-850 at 13.6v. just wanted to give you a heads up if it makes a difference in the build if you set them up any differently. zac lampson

nevermind. i found it.

Right now I have cheap Duals from best buy, so this is why I call this my first "real" system. Originally I had no idea what I was looking for, just that I wanted good sound quality since its a daily driver and I wanted it LOUD. I ran across a few choices and like the AudioQ HDC3's, but I figured I'd go with the FI Q's instead as I've heard they get pretty loud while still sounding extremely good. Heard great things about FI as a company as well. I am driving a 00 4-door sunfire so fitting a very large box isn't really going to happen. I have enough trunk space to fit a larger box to fit two 12's (maybe), but the problem is getting it into the trunk. So my options are ei…

is 11 cub. ft enough to run 2 18" btls with a port?

Will a fi audio ssd18 with a flatwond coil and bp power take 1600 watts daily? I would do a btl but that would be underpowered. if the fi can't take it, has anyone had experience with a 18" jaugernaut?

this is mainly to anyone who works at Fi car audio....my name is travis mislyan and i have placed an order about 2 weeks ago and recieved all my info to my email and ups is notification is not saying nothing and i know my funds have cleared so im wanting to know whats going on i think i should have recieved my sub by now....

I have 4 15" kicker's in my car right now running off 2 hifonics 2006's. i am thinking about putting either 4 18's into a truck or 2 18's of the trunk of my car. i want to flex and have a lot of bass. i already sound loud i my car but i want more. do you think i am jumping out there to far with purchasing 4 fi btl 18's? and if so what sloutions do any of you have for me to get flex and more bass? Oh just fyi the car is a lincoln towncar

Getting used to the BLs... so got a ?... well first off the rear deck is cut out in the center already to allow more air into the car (rear seat's don't fold down). When I had 12s I had a box design with the port facing up but put in the old box with port facing foward and it was louder that way. But with that design there was ~ 4" gap between the port and the cutout.. If I designed a new box that had say aeros coming out right to the rear deck, or just the port designed to fit flush in the rear deck think it would get louder? But I've been told the issue was I have to completly seal off the trunk from the car to make it work.... any input is apprecited.. thank you .

just wondering if anyone is running a lot of power to their ssd's? and by a lot i mean 1000 watts or more......if so, how much power were/are you running to them and how do the subs take it? Just wondering cuz I've been having some financial issues and may not be able to do the monster system i planned to do this season.....I'd like to try and do the 149 class with 4 x 15in SSD's without a wall...

hi ive owned a fi bl 15 fully loaded for like 5 or six months I love it. last week I notice a weird noise coming from the sub and today it stop playing, im running a fosgate p8002 amp witch is around 900 rms and a pioneer head unit gain is set half way , well I took the sub out of the enclosure and one of the tinsel leads broke I have a soldering gun and I fixed it back but the problems from the noise is the spider that came loose from the cone so since I have a one year warranty on the sub what do I need to get it repair,,, please help I love the my bl a lot better than my other Rockford fosgate t215d2 right now i have Extreme Leads on the sub and thats was eating …

Can you try and fish it out of the pile. My address is [email protected] I emailed you about the recone for the LMT motor, and another for a XXX. Im ready to pay just need some confirmation.

you can see the stereo gear in my sig. just thought to share some of my FG a pillar and door builds the doors - pix taken from driver headrest view. the box - the head unit - the SSA inspired "Ghetto terminal" - the videos - waiting for your comments 1 more vid to come. Fi + Sundown pwnage!

I'm planning on buying a 18inch fully loaded BTL. I have a few options in mind for an amp. I personaly like Soundstream amps. Hifonics as well as Planet audio make cheap but powerful amps.IMO JBL make the best underrated amps but there are so many choices to choose from. On this forum Sundown is the amp of choice by many. I found this link with a list of some athe most powerful amps on the market. Take a look at this link and tell me how accurate you think this list is also wich amps you think don't belong on this list. http://www.lightav.com/car/amps/poweramps.html

Hey do you guys have any recones for an idmax/me 15 with a 2.5 inch coil??

I got my 2 BL's a while ago, back in September. I just got around to getting my amps, so I take everything out of the box to hook it all up, and I noticed one of the cones is rock rock solid. Thats when I really started to worry, I hooked everything up running them at 1 ohm, and played a quick sweep to see if it would unlodge the coil. Nope, just a bad scratching noise, so I quickly turned off the head unit and unhooked everything. So now I am curious what to do. Does the warranty cover this defect? It really sucks that I haven't even been able to jam this sub and its already broken. I sent an email to scott, but I really dont know what he will do.