General Fi

my buddy is wanting eather a 15in fi bl or and fi Q he can't decide which on will hit harder.

my buddy was lookin was a Q or BL 15" which one and what amp would be better sub would be dual 1ohm

What would be a good amp to run 2 10 inch ssd d2. Also what would be a good one for 2 older 12 inch cvrs d4.

im ordering a 18" bl series sub with coling, flatwind, and for daily. what would be the pros and cons of gettin a 1 ohm or 2 ohm or universal sub?

Looking for a few parts... tinsil lead, 2 15" gaskets, 4 sub terminals(with screws on the side). Any chance i could get them from fi?

Not in a rush Scott I know your busy but the prices shown at Fi aren't as exciting as the one I purchased before...lol I'd PM this but.... Do you know or remember the setup of the sub I purchased?(Meade's build) I'd like them the same but Dual 1's. I know the previous one was set up for Daily and thats it. I'm new to the BTL's and I'm hooked and wont use nothing else man. I want 2 of them.

do you guys think the 4 10 x series subs will handle 1500 watts???i was going to do the ssds but if i can get more cone erea that would be cool

I know the recommended power for a standard Q is 1k watts RMS. If I had two Q's setup for IB purposes, about how much power should each see. I was told once use half the power and I have a Rockford 1000 amp, so would 500w RMS work or is that still to much for IB subs, I have no clue???? Don't wanna destroy the subs before I really get them going.

Was wondering how much 2 BTL 18's setup Daily with Dual 4 coils would be after the first of the year? That 350 shipped deal from Meade brand new was sweet. I'm a noob to them so I honestly don't know if it was one...lol but after playing with that one I wanna get 2 thats for sure! I cant get a hold of anyone and heard this forum is the way to go. Thanks Guys.

Hey, I have a 18" FI Q and wean i got the sub there was a little hole on the outer cone. can someone plz help me? I got your email Scott, about sending you some pictures and i sent them and i haven't heard back from you yet. PLZ HELP ME!!!!!! Thanks for everything FI!!!!! Thanks, Quentin K

I just purchased a Rockford Fosgate Power 1000. I will be purchasing a Jeep Wrangler unlimited and the amp and 1 sub will go in. Question: What fi 10 sub would work best with the 1000.I just would like one sub sealed or ported, still have to leave room for the wife and kid. http://ampguts.realmofexcursion.com/Rockfo...000_25_To_LIFE/ Thanks

Alright, tore out my 4.8cuft ported box for the Q and stripped out amps and all. I am now going to start the new build. In this build will be a pair, maybe two, of Hybrid audio legatia L1 tweets, a pair of hybrid's L4 mids, a 15" Q, 3-4 amps, and a pair of 8" mid-bass, not yet determined from who though. System will be setup actively using my alpine HU feeding the awesome fosgate 3sixty.2 processor. Build will include, new sealed box for the Q, amp rack, mounting for distribution block, processor, and second battery in the trunk. Also included will be the door panel build to fit 8's, and the kick panels for the tweets and mids. Not to mention tons of dynamat, monst…

is a 4000 watt pyle amp gonna put a huge load on my battery, i drive a 2004 f250 superduty im just wondering should i get a 6 cell optima and new alternator or what?

i placed an order last night but the paypal said some funny stuff i was wondering if i could get a number to call fi at?????

I promised a review of the Fi X series for those of you who are thinking about ordering some of the remaining stock. First here are a few pics:

Going on vacation thousands of miles away from a computer ladies/gents. Will return on the 22nd, if you need assistance please email [email protected] or post here. Thanks! -Nick

What would you prefer? 2 10" BL's ported with about 2.5 cu ft volume after displacement (2k watts total) or 1 15" BTL ported with 3 cu ft after displacement (about 2.5k watts). I wanna get loud, but not for competition and still save some room in my car. If 3 cu ft is to small for a 15, I could always put a 12" BTL back there. I just wanna get the most bang for my buck and still have ample room for storage. Dodge Charger by the way...I gave up on SQ, realized its not really my thing.

Right now I have a pair of Q 15's in an 8.0CuFt enclosure, after all displacement. Tuned to 30 Hz. I was thinking about doing 4 X 12's in about 8Cuft enclosure tuned to 32 Hz. Power wise, it would be easier on my electrical. But my question is, would the response be there? Would the X's play sloppy? I'm happy with the Q's but I want a little more output (SPL). And I'm sure like alot of you, I like to change things up. Right now my Q's are powered off a PA A3000db at 1 ohm. The x's would be at 2 ohm. Just to throw this out there..I have 2 PA A3000db's if that helps you with your suggestions. Suggestions please?

hi ive been tryna to buy a sub and you guys were replying but than just stopped..my email is [email protected] im the guy who is tryn to buy from canada..i kno you guys are busy but im tryin to get this for xmas thanks

Thanks to the closeout over @ SSA on the fi subs i picked these bad boys up for HT duty, should be getting around 100watts each sealed woot tiny pole vent lawl coil shot

Alright, so we're looking at a street beater type car here. I'll probably be running the 1500D @ 1/2 an ohm, which puts me somewhere over 1500 watts. Now as I understand it, the SSD tends to accentuate the low-lows, while not being as loud on the higher lows. How does the Q stack up to that? I'm looking for a sub that will get loud, and get low. Then, I'm not adverse to a sealed box, but I was wondering how much it will reduce my SPL. As mentioned above, I like to get loud. Sealed looks particularly enticing because of the smaller box needed.

Hey everyone, I'm new here! I'm about to put some bass back into my car finally. Just hoping you guys can be a little better help than RoE was. So I'm thinking I want to go with 1 12" SSD and I'm looking at a Hifonics BXi1206D amp. I'm only looking to spend about $600 on everything. Now a few questions: Do you think that amp is a good match? What type of box should I run? (I like real powerful bass) And is my 4ga wire going to be enough. (I already have a Rockford Fosgate p400.4 hooked up to my door's) Thanks in advance!

I hear all kinds of different installs while playing around on here. Funny thing, I don't really see to many people running a sealed setup, almost all ported and IB. Is there any reason for that? I honestly never heard a sealed setup and am curious.....

I hate to ask this, but I have hit a crossroad. I am looking for some real good output and have around 2k watts of power to play with. I have about 3 to 4 cubic feet of room to play with in the trunk of my car. What would probably work best, 1 15" BL or 2 10" BL's. I thought the 2 10's due to sheer cone area, but any other input would be cool. I am fearful I will not have enough room for a BTL, so that is why that is not in the running.

I can't decide on what size driver to get. It will be going into a 2000 jeep grand cherokee. The dimensions of the cargo area are approx. 30" x 15" x 42" which is ~10.4 cubic feet, however i'd like to have some space left. I'm thinking about about powering the sub with either a kicker zx 1000 or kx 1200.1(open to other comparable amp suggestions). Any particular advantages to each driver? Would the 15 be louder? I know its all install dependent. I listen to rap/hip hop and classic rock mostly(more hip hop though). Not really going for an SQ system, just want the substage to be tight, responsive, and get loud when i want to? Any input is appreciated.