General Fi

i am gettin a 15" dual 2ohm Fi Q i want to know if it would sound better ported or sealed thanks

my buddy was lookin was a Q or BL 15" which one and what amp would be better sub would be dual 1ohm

my buddy is wanting eather a 15in fi bl or and fi Q he can't decide which on will hit harder.

What would be a good amp to run 2 10 inch ssd d2. Also what would be a good one for 2 older 12 inch cvrs d4.

do you guys think the 4 10 x series subs will handle 1500 watts???i was going to do the ssds but if i can get more cone erea that would be cool

is a 4000 watt pyle amp gonna put a huge load on my battery, i drive a 2004 f250 superduty im just wondering should i get a 6 cell optima and new alternator or what?

I know the recommended power for a standard Q is 1k watts RMS. If I had two Q's setup for IB purposes, about how much power should each see. I was told once use half the power and I have a Rockford 1000 amp, so would 500w RMS work or is that still to much for IB subs, I have no clue???? Don't wanna destroy the subs before I really get them going.

Was wondering how much 2 BTL 18's setup Daily with Dual 4 coils would be after the first of the year? That 350 shipped deal from Meade brand new was sweet. I'm a noob to them so I honestly don't know if it was one...lol but after playing with that one I wanna get 2 thats for sure! I cant get a hold of anyone and heard this forum is the way to go. Thanks Guys.

Hey, I have a 18" FI Q and wean i got the sub there was a little hole on the outer cone. can someone plz help me? I got your email Scott, about sending you some pictures and i sent them and i haven't heard back from you yet. PLZ HELP ME!!!!!! Thanks for everything FI!!!!! Thanks, Quentin K

do they make 8s and if so does anyone know howmuch they are? i kinda am stuck between 2 12s 2 10s or 4 8s. i dont know what to choose if you guys could help out that would be great.

I just purchased a Rockford Fosgate Power 1000. I will be purchasing a Jeep Wrangler unlimited and the amp and 1 sub will go in. Question: What fi 10 sub would work best with the 1000.I just would like one sub sealed or ported, still have to leave room for the wife and kid. http://ampguts.realmofexcursion.com/Rockfo...000_25_To_LIFE/ Thanks

What would you prefer? 2 10" BL's ported with about 2.5 cu ft volume after displacement (2k watts total) or 1 15" BTL ported with 3 cu ft after displacement (about 2.5k watts). I wanna get loud, but not for competition and still save some room in my car. If 3 cu ft is to small for a 15, I could always put a 12" BTL back there. I just wanna get the most bang for my buck and still have ample room for storage. Dodge Charger by the way...I gave up on SQ, realized its not really my thing.

i placed an order last night but the paypal said some funny stuff i was wondering if i could get a number to call fi at?????

Thanks to the closeout over @ SSA on the fi subs i picked these bad boys up for HT duty, should be getting around 100watts each sealed woot tiny pole vent lawl coil shot

I promised a review of the Fi X series for those of you who are thinking about ordering some of the remaining stock. First here are a few pics:

Wondering if you could contact me or Corey Anderson in regards to a 02 XXX motor & recone. I know you've been crazy busy, but the sub was getting ready to be shipped before Finals & now no new updates. Thanks for any help! nate

Right now I have a pair of Q 15's in an 8.0CuFt enclosure, after all displacement. Tuned to 30 Hz. I was thinking about doing 4 X 12's in about 8Cuft enclosure tuned to 32 Hz. Power wise, it would be easier on my electrical. But my question is, would the response be there? Would the X's play sloppy? I'm happy with the Q's but I want a little more output (SPL). And I'm sure like alot of you, I like to change things up. Right now my Q's are powered off a PA A3000db at 1 ohm. The x's would be at 2 ohm. Just to throw this out there..I have 2 PA A3000db's if that helps you with your suggestions. Suggestions please?

I hear all kinds of different installs while playing around on here. Funny thing, I don't really see to many people running a sealed setup, almost all ported and IB. Is there any reason for that? I honestly never heard a sealed setup and am curious.....

i got 1 12" ssd in a ported box and I wanted to screw the amp onto the box, is that gonna cause any problems?

Hey everyone, I'm new here! I'm about to put some bass back into my car finally. Just hoping you guys can be a little better help than RoE was. So I'm thinking I want to go with 1 12" SSD and I'm looking at a Hifonics BXi1206D amp. I'm only looking to spend about $600 on everything. Now a few questions: Do you think that amp is a good match? What type of box should I run? (I like real powerful bass) And is my 4ga wire going to be enough. (I already have a Rockford Fosgate p400.4 hooked up to my door's) Thanks in advance!

Alright, so we're looking at a street beater type car here. I'll probably be running the 1500D @ 1/2 an ohm, which puts me somewhere over 1500 watts. Now as I understand it, the SSD tends to accentuate the low-lows, while not being as loud on the higher lows. How does the Q stack up to that? I'm looking for a sub that will get loud, and get low. Then, I'm not adverse to a sealed box, but I was wondering how much it will reduce my SPL. As mentioned above, I like to get loud. Sealed looks particularly enticing because of the smaller box needed.

I hate to ask this, but I have hit a crossroad. I am looking for some real good output and have around 2k watts of power to play with. I have about 3 to 4 cubic feet of room to play with in the trunk of my car. What would probably work best, 1 15" BL or 2 10" BL's. I thought the 2 10's due to sheer cone area, but any other input would be cool. I am fearful I will not have enough room for a BTL, so that is why that is not in the running.

I can't decide on what size driver to get. It will be going into a 2000 jeep grand cherokee. The dimensions of the cargo area are approx. 30" x 15" x 42" which is ~10.4 cubic feet, however i'd like to have some space left. I'm thinking about about powering the sub with either a kicker zx 1000 or kx 1200.1(open to other comparable amp suggestions). Any particular advantages to each driver? Would the 15 be louder? I know its all install dependent. I listen to rap/hip hop and classic rock mostly(more hip hop though). Not really going for an SQ system, just want the substage to be tight, responsive, and get loud when i want to? Any input is appreciated.

Hi scott I've emailed you a while back and also today regarding the order of Q12 d2. Would you be able to provide me an estimated cost of sub + shipping (USPS preferably) to Labuan Malaysia. Its for a friend who after listened my Q15 want go get one for himself. Too bad he's driving a small car and can only fit in a 12. i dont know whether you have a record of my address but here it is: EC Trust (Labuan) Bhd. U0195 Jalan Merdeka 87007 Labuan Federal Territory Malaysia thanks Wynold

is is pronounced as fe or fi as in hi-fi i think as fi as in hi-fi the gf thinks its fe