General Fi

lookin to pick up a q motor. how much would a recone be?

Got metered at 143 even on lil jon throw it up with a fi Q 15

Got BL 15 and looking for a box for it for the past month any suggestions??

I rarely see anyone running sealed on this forum. Since the Q is the only sub to run sealed, anyone with some more insight? Currently, i have a 12" kicker CVX in a 2.3cf @29hz box and I find it tuned too low for most of the music I listen to. I found someone to buy my sub/box for $200 so I'm gonna pickup a 15" Q and run it sealed. Space is a concern to me as well. I'm planning on making a box around 2.5cf after displacement and running it off my viper 1200.1 .. so 1200w @ 1 ohm. How does the Q sound sealed? I'm hoping for a slight output bump up as well as a much flatter response curve. I'm excited to go back sealed!

Ok so i have 2 12" Fi SSD Can someone Post a link on here or something of a recommended sealed or ported box? Please Help

I have an Alpine deck and it has a subwoofer level feature. It goes from 0 to 15. My question is this the same thing as bass boost? I dont want to create more distortion for the sub then I need to. I have the bass boost all the way down on my amp. Im a noob so any positive feed back will be appreciated. Oh by the way I just got my 12" SSD with BP power and HQTS in a sealed 1.1 cu ft box. Running JBL BP 600.1 at 1 ohm. Hope to get anoher amp in the future, but first I'll need a better alternator. THX

I see you have the option for coil, standard, copper, flatwound, exc. How many spiders come with the recone and is this pricing with integrated leads?

has anyone ever done a horn shaped port, where its wide at the baffle then gets narrower towards the back of the enclosure.....just curious if anyone has done this in a wall....

Ok guys. The time is coming up fast to kick off my build. However, I had a few last minute worries (still designing a box) and was curious. I am still debating if I wanna build a box so I can slide it between the wheel wells for real quick sub "fixes" if I must, but am still not sure, what do you think? I want to compete in SPL comps, so I wanna make sure I do this right, lol. How much of a difference would I notice if I went with 2 15" BTLs over 4 12" BLs? With 2 15's the box would just be soooo much easier to design, and I think I am worried about fudging something with the 4 12's. sigh, I need a little help plz, guidance, anything.

In about a month it's going to be time to purchase and I'm stuck on this last aspect of the system. The sub. Will the FiQ work well with electronic music(breakbeats,trance, drum and bass) and rock music? What size sealed enclosure for primo SQ(tight clean bass NOT boomy? Will be powered by a 1000watt rms Sundown amp. Sub will be in the trunk of a small 4 dr. sedan. Front stage and Deck Alpine CDA9887 Mids and Tweets- Hertz HSK 165 Front Stage Amp- Sundown 2 Channel

Hey guys! Here are a few vids of my Q 15's. The first 2 are vids with my first box which was 7.2 CuFt after all displacement tuned to 32 Hz. That box fell apart cause the guy who built it didnt use any kind of adhesive in the joints...only screws. You can actually hear the rattling from the box...it sounded horrible. The second 2 are with new box which is 8CuFt, tuned to 30hz with 120 SqIn of port. Enjoy! The vids just dont do these justice. This is by far the loudest and best sounding setup I've ever had. If you look in the last vid, and look by the sunroof, you can kinda see better how much the roof flexes. Was shot with a phone so its not the best but you will…

hmmm on my way home i saw this focus hatchback with a huge FI AUDIO sticker on the entire rear windshield. its a 2dr hatchback, white with blue graphics and blue rims, + lambo doors. i know he used to have like 4 15" power acoustics and everyone said it sounded terrible..... now hes running FI im guessing, wonder what he has....? is he possibly sponsored by Fi??? palm coast FL btw.

I have sent several emails to change my order of the bl 10 from dual 2 ohm to dual 1 ohm, but I have not received any response if they could do it. I was wondering if I could just get a conformation on if they can do it or not. My order number is #1379.

My old gasket is all raggedy and ugly, where could I order a new one from?

So, I get the general jist of an IB setup. Deaden the entire trunk, make a baffle to hold the sub(s) that completely seals the trunk from the rest of the car. Here is my question though, what do i do with the rear deck. I hear of people doing a lot of things regarding it, but I really have no clue what to do, if anything. Help would be great as this is my very first IB setup. I am sure more questions will come about front stage, but later. Or do you think 2 15" Q's sealed would sound better. I have only ever had ported and am ready for a postive change while making room in my trunk, tired of having no room. Thank YOu

How do I place a Canadian order with Fi Audio using a credit card? No respond to email so I though I would try and get an answer here.

I'm sure you've done it before, but I'll have a DD 3500 motor & basket soon, wondering if Fi would/could provide a recone kit?

I have 2500 watts rms easily disposable at 1 ohm. I dont want anything bigger then 3cuft net for a box, 2 BL 10"s or 1 btl 12", whats the sq like? I have owned (2) 10w3v2s, 1 dd 3515, 4 dd 1508s,1 dd 9512, (1) 12w7, heard kicker didnt like it and heard other subs, I wana know what a bl and btl sound like Im temped to buy this setup. I know the btl 12 will handle 2500 watts but dunno about 10's and i heard the 10 btls are horrible for daily. Little more info this set up is.... trunk rear fire/ported in a jetta price not the problem I want LSQ... not farts not sq with no backing.... So comments?

Ok heres the deal. I have a 04 Crown Vic, front stage only no rear fill and the rear speakers removed from the deck. I have been seriously looking into getting a pair of Q 15s for the last few months but a few things have come up with the family that has side tracked me but Im on point now. I have a pair of Orion 1200d for power but heres my question. I see the new options for the Qs and was considering selling my Orions and picking up a Hifonics XX Thor. I also considered a pair of fully loaded BL 15s with the power I have but I just dont know. I am coming from a background of mainly sealed boxes and this would be my first in my own install. ( I have assisted and listen …

hey nick you have time to start a chat about some amps for the btl's? i sent you an e-mail under the name dbanner... Thanks, Brock

i have just bought two 15 fi bl's daul 2 used on cl. i knew one was going to need a recone so am planning on doing both. I'm running a mtx 81000d to one in a ported box i threw together just to see what each one sounded like box is little over 3 1/2 cubes, an tuned at 32. i get a clipping/slapping sound from the speaker when i turn my gain up past 1/2 way with the vol turned up on the head unit. an (h.u. settings are flat). question: could i just be clipping it? does anyone else get a leed noise? how can i tell what year it is for recone purpose? Thank you for your help any thing i may have left just ask doogie

The dude wanted something different, doesnt care anything about sq really, and definately doesnt care much about spl. He just wanted it to be loud and look good doing it. Hes going to be running an orion 2500d. We hooked it up to mine tonight just after we got done and are going to have to use alot of althread, this thing flexx's like a mother. But it did turn out looking good! Just for you guys info, its an 18"

ok i have two 1000 watt rms ams and not lookin to buy new ones just got these and i need two 12s and id like for them to get lower and louder the a w7 12 and yes the box will be disigned well but im need to know from the FI guys what would be the best sub for daily use to handle 1000rms and beat a w7 thanks i was lookin at the FI Q and BL ones but someone let me know and i want to power them right not under power them

order 2 BL 18's recently. got them both and i got a FI card and 2 Fi stickers but no receipt. i was wondering if you guys ship your subs with a receipt or not? if not its cool, i am just used to getting one in paper form as well as email form. George

Hello all, looking for some guidance .. I am considering purchasing 2 FiQ 10's and using a AQ 1200 D to power them.. I am unsure on the options. i am assuming dual 2 ??? I drive an Xterra so i am considering building a box that would fit behind the rear seats following the slanted contour (thin on top to larger on the bottom) with the amps attached to the back of the box... I figure 2 10's because it would look better than 1 but not sure if i need 2.. Any opinions, thoughts, box ideas would be more than welcome.. Definitly looking for SQ and not SPL. dave