General Fi

Shawn is selling three 12" X's first and foremost Scott....DO you have the parts to build me a fourth one in a Dual 4ohm config? I know at one point you said the parts were going to be rolled into AA and if I cant get a fourth then my plans will change. If by chance you have a fourth how much space do these subs require ported? how small of a box I could get away with? I also am willing to use aero ports if that will cut down on size any. Will I see better bass race results with four 12" X's as opposed to two 12" SSD's running off the same 1500 watt amp? Amp will be determined once I choose the subs but I am looking at the Kicker ZX series. I was going to go with the Q's …

I have a Hifonics 1505d amp and 8.8 CF of space to work with in my truck. Can i make a 18 work? If not whats the minimum i would need? The box is going to be down firing, as i measured it will be 4" off the floor. Lastly could i make a sealed box for these subs? Any pros/cons? Thank you.

I have to find something to put in the trunk of my girls new car. Sadly, I already forgot what she has, came home with it today out of the blue. HUGE....MASSIVE......TRUNK. This thing looks like it can fit 2 spare tires flat it it. 2 15" Q's sealed 1 15" BTL 2 12" BLs 2 12" Q's ported

my girlfriend recently*well like 2 months ago lol* scuffed her rim on a curb, now i don't see any bend in the rim or what not but there is visual marks on the rim for sure. Now for the past i'd say 2-3weeks she has been leaking air, the curb job wouldnt cause that would it? The rim would have to be bent for it to cause the tire to leak correcT?

I ordered a 15'' BL dual 2 ohm. I have upgraded 4 gauge from the alt. to my duralast gold battery and i have a 120 amp alt. I also ordered an AQ-1200D. My boy is doing all the installation but he told me to get the dual 2 and wire it at .7 ohms. Will my voltage drop too low?

I am not sure how IB sounds,but i am very interested in trying it. my problem is. if i do not like it. can i put the IB in a large ported enclosure? or can the SSD be used for IB? here a rough idea of how i will have to build the baffle to house an 18" IB. my trunk opening to the cabin is only 10x25 this is a side view. all lines are 3/4" MDF

I know this has been gone over, but i was just wondering how a single 12" BTL ported at around 2.5 at 32hz...would stand up to two 12" RE se series sealed in 2.5...on an aq2200d. Could i expect any sound quality? any other things you need to know...just let me know. i also thought about inverting the BTL...any concerns or comments on that would also be helpful.

Sent you guys a couple of e-mails with no response. Just wondering if it has been shipped yet and if you think I will have it by the 16th. Got a lil car show and wanting to represent FI there. order #I-12535/00‏

hey i currently have a single 10" ssd stock options running off a alpine pdx-1000. what would the difference be between this ssd and a bl off 1k. i like my ssd but was curious about swapping for a bl. i listen to rap/hip hop

hello- was wondering if you can do any recones on a motor with a 4"coil? have a few motors laying around, would be nice to make working subs out of them....

I need help deciding on what voice coils to get on my fi bl 18" dual 1 or dual 2 ohm would like to run it in 1 ohm.

I have a 12" BL thats was dropped ans the basket broke right off the motor. I am planning on selling it and was wondering would you rather fix it yourself or buy it fixed? I am planning on JB Welding it back together. I will be selling 2. One is a month old and is perfectly fine. What do you guys think?? They are both 12" BL D2 w/Hyper Pole.

ok I hate to sound like a noob but I've never delt with restricted space and a sealed box before so the box I've had built for my 03 silverado ex cab is for 2 10's firing forward under rear seat it has a total of 2.4 cu. ft. so after displacement wich is 0.12, cu. inches per that should give me about 1.08 cu.ft of airspace per sub right.The box was originaly going to have 2 RE se 10's but have since decided to try the ssd's since they have similar specs and recomended airspace, and I dont want to F*** up so thanks in advance for any help

When is FI audio producing a wallpaper? my computer needs one!

If I'm not getting enough (12v) through my remote wire, how do I fix it? HU ground? I'm only getting 11.8-11.9

i have a 2004 lincoln navigator and ive been doing research on a high out put alternator and im not sure with one to choose. so here it goes my choices are as follows; power master 220 amp, d.c. power 260 amp, xspower 250 amp and a 260amp Irragi Alternator i cant seem to locate 1 with a higher output should i go with 1 of these or should i go another route??? i have 2 15inch fully loaded btls on a lanzar opti 6000d and a lanzar opti 400x4hc ( for my loud speakers) and a kenwood for my tweeters. please advise and thanks in advance fellas!!!

i know there are some busy times over there. just wondering when will Scott be available for answering emails. i wish to make some international orders to Israel. thanks

Hello, So there has seem to be some confusion lately about the N series, and I wanted to start a topic to clear things up for the normal users who may or may not know what to buy. So could anybody that either works at F.i, or anybody that has and tested any of their N series equipment, please explain their use and purpose clearly. For example, what is the difference between the BTL N1, and the BL for instance. Why so many different lines and different job specific equipment that may confuse the consumer or may be overwhelmed by so many options? As of right now, the website has 6 total different lineups, and if you include the BTL series, you have a …

ok i just picked up 4 18'' fi btl fully loaded and i need a big ported box..can some one give me the best enclosure dimensions for this set up? i have 2 atomic at 50001d amps so 10,000 watts untell i get my 2 atomic 7000.1 its going in a 01 tahoe lt with the second seat...but the third seat is coming out so i got the whole back of the truck to work with!!!

ok so my old sub quit working and was smoking in the box right took it out and decided to play with it and is working again but absolulely stnks when played but seems to pound just as hard wtf is going on? is it ok or is it bad to play like that

scott i will email you with all the details, just wanted to give you a heads up. need to talk to you before friday.

So i've more less disappeared from here due to not having any sort of internet access...our internet went out on Friday, and has been down ever since. Everybody that has emailed me that i have gotten i have replied to, i don't have a clue what is going on on the forum, so questions here will be answered as soon as i can get back to it and get everything under control here on the home front. I apologize for any inconvenience that this may have caused any of you. Thanks for your patience and understanding! Nick Morgan Fi Car Audio

I order a 15" ssd on june 20 I just like to know the status of the order. I understand that you guys are so busy . just like to know if possible when i'm getting it

Here you go....this was on 600 watts and with a speaker terminal broken(1 sub shorted out). Running only 3 FI BTL 12" subs.

Power : Sundown SAZ-3000D @ 1ohm Enclosure : 7.5-8cuft after displacement tuned low {28-32Hz} , CRX style enclosure