General Fi

ok im gonna be buying two 18 Fi bls and wondering if 4000 watts was too much for them. i know that Fi subs can take more than rated but is this too much?? they will hopefully be two U.S. AMPS MD 3Ds

I need a phone # to Fi, or someone that I can talk to about making me a custom sub. I have a 12" eclipse ti motor (tc 3hp), and I want to add a Q, BT, or, BTL top end to it. Anyone got a #. Thanks.

Yayyy...I cant wait to get. Any Idea on how long it would take to get it!? I am just so excited! Order I-10871/00 dated 11/09/2007

how much does a 12" SSD weigh thanks

Can I get 4 ohm coils in the Q line? And would the 4 ohm sub have more bl?

Although not done yet, it is installed and I've had a coupld PM's from people asking to see pics of install, so here it is. not really a build log, sorry shoulda taken more pics of me and my friend beating on the trunk floor with a tire arm to get the box to fit. also have a crappy quality vid up on youtube, it was done with cell phone but at least shows some of the flexing power LOL click on the guy who made the comment, then click on his vid on his facebook or myspace or w/e very funny

Whats with people always bashin on sealed boxes, when subs like SSDs and RE SEs do so well in them for daily pounders? Its seems people are so narrow minded and think the ONLY thing that is important about the box that if its ported or not. These people need to hear some loud sealed groundpounders!

nice little sub here. these were ordered for a friend of mine to replace some old old old kenwoods in a pre-fab bandpass box. i don't know how well they would do in them but i'm sure it would be pretty good. here are a few pics. i won't be able to give a review till monday or tuesday as i'm going up to sarasota tonight, then orlando tomorrow, then miami on sat, then back home. so yeah. thanks Fi.

I am hoping that scott or nick can help me with this...i sent an e-mail and i know you guys are busy, but i have not gotten a response yet so i'll reort to the forum again... i need a dust cap...the outer one...i have my speaker reassembled and this is the last piece of the puzzle...i was wondering if i could buy one preferable a blank one....is this at all possible scott or nick? thanks for the time

Wondering if you could contact me or Corey Anderson in regards to a 02 XXX motor & recone. I know you've been crazy busy, but the sub was getting ready to be shipped before Finals & now no new updates. Thanks for any help! nate

So i've more less disappeared from here due to not having any sort of internet access...our internet went out on Friday, and has been down ever since. Everybody that has emailed me that i have gotten i have replied to, i don't have a clue what is going on on the forum, so questions here will be answered as soon as i can get back to it and get everything under control here on the home front. I apologize for any inconvenience that this may have caused any of you. Thanks for your patience and understanding! Nick Morgan Fi Car Audio

I really need to know this fast. Will the Powerbass ASA-1500.1D handle the load that an Fi Bl 12 with Dual 2 ohm coils give (.75 ohms actually). A fast answer would be appreciated!!! http://sonicelectronix.com/item_10084_Powe...SA-1500.1D.html

I see that the cutout for an 18" BTL is 16.75" when mounted normally. Is the cutout the same size when the driver is inverted, or does it have to be a bit bigger?

Hey I was wondering if I'll receive a tracking number when my recone ships? I know you do for sub orders but do you e-mail one for recones as well?

I have a ported box now but i thought for fun i would change the port length to get me a tuning of 28hz. Becuse of the lower tuning will that do anything to the efficenty of the design? Would be audibly different while playing? I thought it would drop lower when i put it in from the begining. thanks

Scott, Can you please check your mail client for the subject containing order ID "I-10840/00"? Sorry I'm just not sure how else to get in contact with you, and I know you're swamped catching up.. It's in regards to shipment of my order. It's important due to reasons in my e-mail that I receive it Friday or earlier. Normally I wouldn't be so anal about it, but was told 2-3 day build time, as well as an e-mail from you last week telling me that it would be shipped Thursday or at the latest, Friday. We're now nearing the end of the 6th business day for build time, but I'm willing to do what it takes to get it here on time, like splitting expedited shipping with you. Would re…

I wanna get loud...I wanna sound good. Im on a little bit of a space restraint on my box. So i plan to go 2.4 cu ft. tuned to 32hz more info later

***Attention Fi Car Audio Staffs!*** This is a notice regarding the future ordering of two Fi BTL Subs. one 15" BTL (dual 2, cooling option, daily, universal) and one 18" BTL (dual 2, cooling, 3rd magnet, HiXmCoil, Daily, universal). I asked my aunt from CA to order it for me because im from the Philippines. I believe she already sent an email to sales -at- ficaraudio.com but im worried that she might not get a reply like from what ive experienced.. Could somebody from Fi give her some assistance cause she doesnt know anything about car audio stuffs AFAIK. She'll be using the email add dancast -at- comcast.net. Hope this info helps. Thanks!

How could i get some Fi stickers like some 4" ones or so

I wasn't quite sure where to post this so I will just do it here. I have been working on a huge research paper for school regarding some topics in math. I am sure some of you remember me asking questions earlier. At first I was going to leave everything silent, but have decided against that just in case several professors wonder what sub I used. So, would it be okay if I printed your companies name and the findings in my paper. All the paper covers is designing ported enclosures, how to design them, the math involved, etc. It goes into no detail at all about the actual build of your sub or any other technical issues. Thanks Mathman

hey guys , just finish building a box for a friend of mine the car is a 06 toyota corola the box is 4CF tuned to 33hz amp is Sundown audio SAZ-1500D running at 2ohm the sub is stock no options. let the vids show what they got [sorry for the lame video skillz] http://s137.photobucket.com/albums/q220/ka...nt=PB020015.flv http://s137.photobucket.com/albums/q220/ka...nt=PB020014.flv http://s137.photobucket.com/albums/q220/ka...nt=PB020016.flv http://s137.photobucket.com/albums/q220/ka...nt=PB020017.flv http://s137.photobucket.com/albums/q220/ka...nt=PB020018.flv http://s137.photobucket.com/albums/q220/ka...nt=PB020019.flv http://s137.photobucket.com/albums/q220/ka...nt=PB02…

Ok, im looking into get a pretty nice system, but i cant decide on which sub to get.. 1. new orion hcca 15" OR 2. 1 fi btl 18 was going to run them on a hifonics BXi 2607D at 1 ohm.. what you guys think, im kind pressed for money.

Interested in Getting a shipping crate to ship a 12" btl. How much would one run? you can post here or email me: [email protected] Thanks!

Ok, I have owned quite a few subs in my quest to find the right one for me. I searched long and hard for a '05 XXX 12 and I finally got one powered by a tantrum 1200.1 in a 1.1 'ish cubic foot enclosure. I think it's suffocating though. It sounds good, I just think this sub was more suited for a larger sealed or ported only enclosure. For my vehicle I can only fit a small sealed enclosure, so I was thinking of going back to a Q12. I have a SSD12 with copper coils/BP but it's in my home theatre setup right now. Should I keep the XXX, because it is an awesome sub or go with a equally awesome sub the Q12 because it's better suited for my application? The vehicle is a 2002 …