General Fi

Im sick of changing my mind lol.. Basiclly, I found someone else with the same jeep as me and he says that side firing is the best for ours because the port needs room to load, and it doesn't have the room it needs firing directly into the rear hatch. Any truth to that? How much of a difference is it going to make going from 6 cubes with 96sq/in of port area to 8 cubes with 128 Sq/in of port area? Can someone help me design the box. I mean I have the basic design down, But I need to know how to do the port. Cause I am lost.

Here are the recommendations for an SSD 12" so you don't need to open another window or tab, for you Firefox users for reference. SSD 12

when i go to the FI site, goto speakers, click the BL series, nothing shows up. The rest work, just the BL. I want to order my new subs but...

Do you ship to Bulgaria ????

I've been waiting for almost TWO weeks to see the BTL Recones back up on the site. What is going on here?? I have several competitions that is just going to go past me and nothing is happening with the BTL service. I mean I really like the subs but the service for BTL that i've been receiving is very horrible. Im on the verge on switching over to RE and purchase the XXX's. Can someone please give me a answer on these Recones for the BTL's??

So i bought the fi q fully loaded with cooling option and so it can handle an additional 500 wrms but my subwoofer is geting hot after runing it for 20 minutes. its dual 2 ohms voice coils and its wired to amp at 4 ohms my deck has out puts of 2.5 volts here is image of how my amp is set the volt input sensetiviy got moved by the bass.. its set to 1-2 volts. the subwoofer is on a 2.3cubic foot box.. what could be getting it hot?? i only use bass knob that came with it i dont even go pass mid bass knob and at the end of the ride the amp is a little warm but not as warm as the subwoofer.. im scared to burn it.. is my amp set right??

Was wondering how much 2 BTL 18's setup Daily with Dual 4 coils would be after the first of the year? That 350 shipped deal from Meade brand new was sweet. I'm a noob to them so I honestly don't know if it was one...lol but after playing with that one I wanna get 2 thats for sure! I cant get a hold of anyone and heard this forum is the way to go. Thanks Guys.

hello fi. audio can u help me choose a sub for my 2005 tiburon hatchback. ill be running one jl audio 1000v2 plus i was thinking about a ported box firing up with 2-10 or 2-12 or mayby 1-15.this is the space i have to work with 14-in (H)X16(D)X34(W)

what amp would be better for a 12" Bl with the BP Power? US Amps MD 1D (underrated at 1200w @ 1ohm) or US Amps MD 2D (underrated at 1500w @ 1ohm)... Also would the flatwind coil be worth the extra $20? And also what would be a good box size? I know it recommends anywhere from 1.8-2.5... but what would be about perfect?

1. Ups is the only option it has for shipping, is it okay for me to send it to them through FedEx or is the shipping that is included in the checkout for incoming and return shipping? 2.What address do i send it too? 3. Expected time before it is shipped back? Anything else i should know? Thanks in advance can't wait to have my sub working again.

When is FI audio producing a wallpaper? my computer needs one!

just wanted to say thanks to scott and everyone at Fi. got my 18 BTLs in today cant wait to install them. thanks again guys!

the cap on my 18" btl has a dent on it and i need a new one who can sale me 1?

Please contact me via email [email protected] or Scott if u can contact me, u can reach me by phone from 10am-10pm EST I really need to speak with u guys thanx Peter

hey everyone I am planning, on getting 2 12 inch fi btls n2s powered by two audio q 2200 amps. I am a begginer and was wondering if 180 amp alternator and 1 yellow top battery would be enough to power these two amps? Any help is highly appreciated

This is my first post here. im building a sub box for a 15" Fi SSD. it hasnt got here yet and i need to know the cutout diameter for the hole that the SSD goes in. the box is 4 cu.ft. tuned to 38hz

Recently I purchased two 12 inch ssds from Fi car audio. I was looking for something loud yet retain good sound quality. I first built a box which is 4.5 cubes tuned to 33 hz. I have them hooked up at 1 ohm to a US amps Md2. At first i thought the low end was lacking so i contacted scott and told him and he told me about the copper coils vs the aluminum coils. Well the copper coils made that much of a differnce because i love these subs. They play the lows nicely and get loud. The sound quality could be better. But being that im a bass head it doesnt bother me at all. Compared to a sx which everyone wants to compare them to. I would say they are alike except more musical …

Will a fi audio ssd18 with a flatwond coil and bp power take 1600 watts daily? I would do a btl but that would be underpowered. if the fi can't take it, has anyone had experience with a 18" jaugernaut?

Is there a way to find out how much output I will lose if I go from 15" BLs to 12" BLs with the same variables on the same power?

Im getting ready to order three fi ssd with bp option, but i want to make sure i get the right ones for my application. I will be running 3 of the 12 inch ssd's off of 2500 watts at 1 ohm. my question is, do i need dual 1 ohm or dual 2 ohm subs? What is the actual coil impedance? Are they dead on 1 or 2 ohm, or are the impedances actually lower or higher?? I want to do 3 dual 1's ran in series and then paralleled all together at .67 ohm, but if the actual driver impedance is lower than 1 ohm per coil, the total impedance may be a lot lower and i don't want to risk burning up my amp. Now, on the other hand, if i go with dual 2's and wire them in series then paralleled all …

What would you all recommend for my low pass filter setting for a 12" SSD w/ CC in a sealed 1.5 cubic box. Yes I know it's a big box but I usually prefer the sound of bigger sealed boxes. Also is there a method for checking that the crossover setting you see on an amp is the actual one that is being output by the amp? I thought using the DMM method and seeing the voltage would work but it didn't tell me anything. I played a 50hz tone and moved the LPF around and all my measurements did was the increase in voltage as I lowered the frequency and vice versa. I thought when I hit 50hz on the dial and below that it would flatline in voltage, but it kept increasing as I l…

For my sons 4 SSD 18's. http://www.soundsolutionsaudio.com/forum/i...showtopic=21150

yup it dont matter where i go or what i do, i can always stop and someone wants to get in......the end result is more vids for my site enjoy....the cleaner version will be up on my site a little later. Youtube will have to do till my admin gets home oh and the quad alts is the chit it is CRAZY loud now damn......subs arent getting hot at all.

This might've been answered before, as most new topics in the forum usually have been, but I thought Fi didn't use to charge for shipping subs? Wasn't it included in the price of the sub before??

Got a customer that is considering going with either a q10 or ssd 10. Customer mainly listens to rock, metal and other types of music along those lines. If i stick with the 1.5 cu.ft. net spec and tune alittle higher around 35-37 hz, how will that sound. Also, customer requirements is the sub has to be dual 2 ohm 1000 watts continous per what he stated. The vehicle is a1998 single cab Dodge Truck and the enclosure is replacing the center console with the both the sub and port firing back at the cab rear wall. Space from baffle to cab rear wall 6-8 inches. Phil Woodlawn Cabinetry