General Fi

So i'm interested in purchasing one 12" BL subwoofer but don't know what to select for the options. It will be going into a 2008 Nissan Altima and being powered by a Clarion DPX1001.2 and the specs are: 250 watts RMS x 2 at 4 ohms 450 watts RMS x 2 at 2 ohms 500 watts RMS x 2 at 1 ohm 1,000 watts RMS at 2 ohms in bridged mode i am just wondering if someone could help me figure out what i would need to select for Hyper Pole, Cooling, Flatwind etc. This would be a daily driver and not spl, and pleas correct me if i'm wrong but would i need a dvc 2 ohm sub wired to 4 ohms and bridging it at the amp would bring it down to 2 ohms right? need anymore information, just let me kn…

Two (2) Questions: 1) Is the Fi websie the only place you can buy Fi Subs? 2) If am supplying 2000 watts (Hifonics BXi2008D) to (2) 15 SSD, would it be better to inculde the flatwind or the copper coil feather on these subs? Thanks

I have 2 04/05 RE XXX motors. This summer i wanted to recone them to DVC 2ohm 12" and i was wondeirng if fi offered a recone kit so i could do it myself that way i wouldnt have to pay for shipping to fi for each of the motors. Also how much would it be? Thanks.

So I have been checkin out his posts and now I am curious. What would be "louder" in an overall sense....4 10" Q's sealed or 2 12" Q's ported. I have no exp what so ever with sealed enclosures and would like to know the answer to this. I know the 10's win with overall surface area, but will the ported cause much more SPL than the 4 10's? Any advice on this would be great cause I have been thinkin about it for quite some time now and it is driving me nuts. Side Note: Probably use a RF4000.1 to 4 10's or Kicker2500.1 or such for 2 12's. THANKS

the btl recones will fit mt motors correct? and how much for dual tinsels. they will both be d2 18's. thanks

i need to order just an 18" 12 spoke basket is there anyway to do that??

Is this a good combo, I chose PDX because I currently have it, I also have a sound processor for it to adjust the bass because the pdx doesn't have one =/. I am getting rid of my 1243d Type X. Also it is going to be in the Type X box at 2.0 ft^3, 33-36hz, 1.82 net. Is that good?

hey guys so this will be my first box build. I have 18in fibl dual 1ohm with a jbl gto 1200.1 watts 1114 watts rms at 2ohm. my max demsions are 37L by 20W by 15 Depth. Im using Re enclourse calculater. But i want to know whats a good port area size and port width and any other factors that i should be looking for liiek what it should be tuned at. I want it to sound loud, hit lows, and have good air flow. If you guys could help id appreciate it

I ordered a BL on the weekend, and got an answer on Sunday. I live in Canada so I can't order off the website. I ordered my sub(10" BL) and forgot to state the impedance. So in the email back he tells me what it'll cost, and asks me what impedance I want. This is Scott BTW. I tell him D1, because I was in a rush and completely blanked. Ever done that? I'm at work thinking "you cant wire d1 to 1 ohm..." kind of freaking out. I get home, email Scott, get an answer that says "we already started, but we'll just put the motor away for the next order. no problem." How SICK is that? C/S at it's pinnacle right there! The build will probably start next week while I'm of…

Is there any way i can pay alittle extra for faster shipping? like Fedex 3 day select?? I have a comp on the 25th of oct and my check will clear thurs-friday for my bank account so thats the day i can order it..is there any way i can get it thay thrus-fri(23th-24th)?? I know FI is extremely busy but i would love to make it out to that comp FYI im ordering 2 fully loaded BTL 18's

ordered my 12" BL tuesday 11-27 and the UPS man delivered it this past thursday 12-06 i must say that was rather quick, and the sub was packaged great! :beer: for all those who had part in getting my new baby here safely... guys at Fi, UPS, everyone lol

Just received my FedEx information for order number 1471/1472 on order 1471 is says as follows Reference information includes: Department number: (1)BL15D2 FC Ice On order number 1472 it says, Reference information includes: Department number: (1)BL12D2 FC Ice I order 2 BL12s not a 15 and a 12 Also both say there 51lbs which is what the 12's weigh, the 15's are 54lbs so I hope its just a typo error n my order is correct

Hey everyone I have a quick question. How does it work with the RMS wattage and the impedance the speakers are wired to? Are they always the same RMS wattage at the different impedances you can have the speakers wired to?

ok first I did see the other post related but said not to reply anymore. anyways I bought my 2 fi bl 15's on oct 12th and only recently recieved an email saying they are awaiting fufillment, does this mean the order did not get started until i got the email about the order? I know they are busy just trying to get an estimated time frame to work with here

Hey guys, I never registered because I always had problems with the email. Id sign up and I wouldnt get an email and it just never worked out. I always read posts in here, and I figured Id give it a shot, and it worked! So here I am. I should be around regularly now. Btw, I got my BTLs reconed today, and Ill have some bassrace numbers Sunday!

I ordered and paid for a Sp4 18 d2 one week ago. Sent an email the next day about adding carbon cap option and have not got a reply. Any help would be appreciated.

Can a BL 15 handle 1000 watts rms on music for 10 to 15 min at a time with just p chamfer, Daily?? I need to know asap so I can place my order. In a 3ft3 enclosure tuned to 48hz.

How they compare head to head?

hello i ordered a Q15 from you guys thursday of last week. just checkin on the status of the order. Invoice number: I-11441/00 Thanks!

I used to have all three of these numbers but I lost my old phone. Please don't put these numbers on here publically send them to my email at [email protected] thanks guys I appreciate the help.

Hey guys, i need help with a box design and unfortunately im strapped on time. If someone could help me out with some plans with these specs i would be greatly in debt. Box is for 2 12's ( .15 displacement per) tuned to 32hz - slot port centered on box double baffle 3.6 cubic ft total 36w x 16h x ??d I need the width and height to stay at 36 and 16. I tried using subwoofertools.com but the program wouldn't give me 36x16x?? but rather 32.5 x 16 x 23.5 or something. Once again if someone could help it would be greatly appreciated.

this vid was taken by someone out at the Cruise on Saturday nite......we were posted up i swear it turned into a straight side show.........sorry for the poor quality but it should be enough to pass the time OH ya i didnt have a converter for a .3g2 format to Mpeg so i had to use this freebie with the watermark. If anyone wants to convert it for me i can send the entire file to you..its a crap quality vid anyway... the good thing is that at least 50 more people, and their friends when they get home, now know who a little underground company called Fi Car Audio is It was pretty wild out there

Ok guys, vehicle to be worked on is a 1996 full size conversion van. Huge vehicle. I'm trying to decide what woofers and how many I should run in this. Power will be along the lines of something like 4 IA 40.1s. I was thinking 6 BTL 18s. Thoughts, ideas, experience, lay it on me please.

i haven't purchased anything from fi in a bit so i wasn't sure who to ask/bug. Im looking for a price on 2 MT 18 recone Q2 and 2 18" baskets. I was also wondering if you guys have/sell the nice black ca glue and activator? Ill probably be picking this stuff up as soon as i can. Id say a week or so but really depends on funds

Simple question: Did the first generation Fi speakers (specifically the Q model) have sewn in leads?