General Fi

I wanting to run 2 12" Qs in a sealed box under the seat of my 07 crew cab sierra Theyll have about 1cu ft of air space each. Im wondering if the SSDs would be better for this type of enclosure or what? Ill be running a RF Power 800a2 for right now and upgrading later to probably a RF T15002

15" Q on a old school memphis 1000D, quality was alot better before youtube but then again tis my first vid

So i have looked at the ported box design at the top of the page for an X 10". My question is how will this sub perform sealed in about .75ft^3? I know ill get more output out of the ported box and a little tighter bass from sealed. Is that 32hz tuning ideal for the X 10" I would assume since the fine folks at Fi posted that diagram and they know their speaker better than anyone. Once again im powering it off the back two channels of a JL J2 320.4 so around ~180 watts. Vehicle is a 1998 explorer so space isnt the issue at work here.

i have a lanzar OPTI 6000d- i have purchased 2 x 18 inch btl fully loaded, however i need help building an encloser. Can any one assist me??? i have a 2004 lincoln navigator. what type of encloser should i use???? im looking for something that pounds!!!

hey nick, i was unclear on what had happened to that sx15 recone with the power options. i got a message from you that said it had shipped last tuesday, however my tracking information never changed from "billing information received" that was on the 14th. i haven't heard from you by email yet so i figured i might try here.... -sean

Can fi recone an atomic apx?

Hello everyone. I'm in the process of building a small budget system and I want to get the Fi X 12" as my sub in a sealed enclosure. It will get power from Crescendo 1000C4(~500W bridged). I know that the recommended enclosure size ranges from 0.6-1.1 cuft but I don't know if I should go with a larger(1.158 cu ft.) sealed box or a smaller one(0.749 cu ft.). I listen to dubstep, rap(eminem) and rock. I want the sub to have good amount of output and produce good lows. Here are the enclosures that I'm looking at: http://www.sonicelectronix.com/item_7589_Sonic-Sub-Box-1H12-0.7-Gray.html http://www.sonicelectronix.com/item_7590_Sonic-Sub-Box-1H12-1.0-Black.html So which enclos…

I was wondering if you stopped making the BTL kits, cause i need one very badly, and on the ASAP.

me and my friend are about t ostart doing car audio work on the side whats the best place to get wire? power, rca etc. im about to get it from http://knukonceptz.com/ but i wanted to know if there was a place cheeper

I have been trying to download a program to find the frequency of certain songs from my itunes library but i cant figure out how to do it. any help?

did it ever have the option of a third slug?

hey guys, im currently running a 10" MTX 8500 series sub with a JL Audio 500/1 amp, in a Pro Box. Its already pretty loud, but i dont think the sub would last that much longer, i was listening to a couple songs on the the way home from work and when i was a block or two away from my house i smelled something funny, went home and popped my trunk and the smell was coming from the sub, the cone was pretty warm from only 10mins of music and i had the volume at 14 on my alpine headunit. The sub is rated 500watts rms, and thats what the amp put out or a little more, but i didnt know it could heat up that much. Im looking to sticking to a 10" sub if possible since the box wasnt …

I was thinking.... Right now I have a 15" BL with an RF T10001BD amp, its loud, very loud. I want a more sensible setup but attempt to keep the same sub output, I don't think its possible. I want small box, small amp, and still be able to do 140s. I know thats not possible. I just want to reclaim my trunk space back and my spare tire and jack!!! With that huge box in my tC there is no more trunk space!!!! Now I am getting kinda tired of hauling around a 100lbs box... Ok I'm done ranting....you may return to your regularly schedule program.

well ive asked this question before but it was with the kicker zx1000.1 that i already have. and now im gettin some money so i can mabe get the kicker zx1500.1 for the BL. i dont know wat size i want to get, but it will be either the 15" or the 18". the options i would get for the sub are the cooling, flatwind coil, p chamfer, and the daily option my real question is, can the BL handle 1500-1700 watts daily with those options?? im think it might be a bit 2 much for it. if theres any other amp that anyone recomeends thats around 1300-1500 watts would be great thanks

I can't decide on what size driver to get. It will be going into a 2000 jeep grand cherokee. The dimensions of the cargo area are approx. 30" x 15" x 42" which is ~10.4 cubic feet, however i'd like to have some space left. I'm thinking about about powering the sub with either a kicker zx 1000 or kx 1200.1(open to other comparable amp suggestions). Any particular advantages to each driver? Would the 15 be louder? I know its all install dependent. I listen to rap/hip hop and classic rock mostly(more hip hop though). Not really going for an SQ system, just want the substage to be tight, responsive, and get loud when i want to? Any input is appreciated.

lol so i have probably posted this on every site, but i just want to see on wide term who thinks what, what do you guys think is better with hitting lows and slappin hard, the FI BL or the AQ HDC3?

Is scott around anywhere??

what's the best way to mount a sub box to the trunk

I spoke with a delivery driver with UPS today. He told me that internet sales have increased by one billion dollars in the last couple weeks. He also told me that due to the increase of shipments from online purchases to expect shipping delays. In some neighborhoods you may see drivers delivering packages on golf carts. Everyone buying their christmas gifts early offline has increased shipments being handled substantially. Now you may get your items on time with no delay, but to expect them anyway because most shipments will be late due to the increase of volume in shipments. Now it will take even longer to get my fantastic Fi subwoofers I cant wait for them to get here…

Right now I have four JL Audio 10w3v2s in a 2.5 cf enclosure in my Suburban and I am looking to upgrade. My goal is good overall sound quality in my daily driver. Would you recommend 2 FI Q 12's or a single 15? I will be using one or two of my Tru Tech amps depending on which setup I go with. I am using Hybrid gear up front and would like to provide a good match. Thank you in advance for your time and help, John

Well to begin, I will report on my expierence with FI customer service! I ordered through the site and paid with my paypal account, the site was very easy to understand and use! Once I ordered, I began harrassing Scott with all kinds of annoying questions. Scott answered everything I asked as best as he could, without complaint! I even sweated Ndmstang a few times, he too was helpfull and understanding. So all in all customer service was top notch. Tracking was so so, UPS sucks in my honest opinion, that has nothing to do with FI at all though! They rarely updated the info for tracking, it always looked as if my sub was just sitting around. I am biased though because I l…

I got a pair of jl audio 8w6's and i need them refoamed. can yall do this for me if the price is right? or send me some high roll 8" foam? they are the oldschool version ones and jl audio doesnt wanna f*ck with them. i also got a pair of 12" ssd's i need to send to scott for repair. i called scott about a week ago but no answer. thanks for any and all help "

Have a show coming up next week and at the moment I have a DE3000 powering two BL 18's fully loaded. I was wondering as I have another DE3000 lying around would the BL's be ok with taking 3.5k each for just a day (providing everything is set up correctly and I don't play them like a A hole) ??? BTL's are coming soon but was just curious if I should do this or not.

hey whats up... well first i want to know how much do fi or scott charges to recone 2 re audio mt motors to some kind of 15 inch re audio mt/ fi btl sub. i have 2 mts well lets say motors i want them to be fi and well rep fi so i just want to know like a estimate to recone 2 subs to 15 inch with fi btl softparts. thanks

danielhattie2000 (4 months ago isnt a btl a sandwich too? phsballin10 (3 months ago) thats a BLT asswipe danielhattie2000 (3 months ago) oh sorry