General Fi

hey, ive been trying to contact you guys about recones for my 2 8" assassins that i sent in a while ago. ive been emailing scott back and forth, but my last email was last week, and he told me he'd call me on monday for my card info. its now friday, and i still havent heard anything from fi. i tried calling today and left a message, but no reply...any updates for me? im desperately waiting for my two cute drivers to show up.

question in title. wondering if there is any way to VISUALLY tell if a BTL has the daily versus the spl option. got a sub im looking to buy...but the dude doesnt know if the sub is daily or spl (he bought it from a guy named "beau" who goes by the name "astrolade" on caraudio.com) and i have no way of getting in contact with him.

Scott/Nick, I got a recone kit from you the other day and went to recone it for a customer and took the tape of the motor for the first time and the top plate on the motor seems to have shifted . Now onto the question, if i send the motor in could you reset the top plate? Corey

I've e-mailed you twice about reconing to 15s and haven't heard back from you at all...

will there be a new cone design for the Q line or any line? Maybe something that looks like the new AA Havocs. Make it an all black cone with the with the Fi logo painted on the bottom of the cone in flat black. Something like the havocs or the w7's. And since the subs are made to order, you could do any color that the buyer wants to have on it. Sound good to anyone???

And I can not wait to see them.

I havent really seen anyone hook 3 subs up to one amp, is this possible without causing big impedence problems. If it is, what would be a good amp to run 3 1ohm subs, or should i get the 2 ohm version?

Wanting to try 2 BL 18's and will have about 1600wrms going to each sub. Is that too much? if not, which options should i select for them to perform well with that much power. It will be a daily beater/bass racer..box will probably be around 10 cubes net crx style with about 150 sq inches of port if this helps at all.

which amp will push a BL 12" sub? a sundown 1000D or sundown 1500?

I have a Hifonics BXi 2006D, and i need to know if i should get a Q or a BL. The amp pushes about 1600watts. also what options? I would use for daily use, i listen to rap. I was thinkin on going with the BL but if i could get your opinion. Thank You Wes

Not sure if this is a reasonable question as I just found ficaraudio, but here we go: How do these compare to the old RE XXX (2005), the BL and BTL? I would assume the BTL is close but how close? I need a daily driver sub (mostly real music), I have a US Amps 2000x (3000 watts). So from what I gather that puts me in the BTL series, fully loaded. Is this correct? I have read that the BTL10 is not a good daily driver, is this still true as the web page does have a daily option for it? I would prefer the BTL10 due to enclosure size but could swing the BTL12. thanks

I'm a couple days away from buying two SS XXX 15s. I intend to run two Autotek MM4000.1Ds to them in about 8 cubes at 30 Hz. This is in the back of an 04 TrailBlazer subs up port back. While I am certain this will get loud I am finding myself leaning towards the fully loaded BTL 15s. The Autoteks would be too much power for the BTLs but let's say you had the option. The SS XXX setup with the Autoteks which, at 3 ohms, would give each sub around 3000 watts, or two Fi BTL 15s in the same box in the same vehicle as the SS with about 2500 watts to each? I am getting a good deal on the SS so even they are still going to cost more I am not unwilling to pay for it. Which would y…

So my grandfather comes down for a visit in his new car, one of those two seater fast driving Caddy's, nice car. He sits and listens to my system, seems to love it. Out of no where this 72 yr old throws me in his car and cranks up his radio. He has an SQ setup using 3 10" eclipse subs (not sure what type, but nice), and two sets of Rainbow Germaniums. That stuff sounded nice. For the first time I was listening to something that didn't just throw out so much bass that is almost all you could hear. To make things better, my old lady is makin me sell one of my trucks to get a car in the next couple months, meaning a new setup. I will probably be on here asking all sort…

whats the biggest size to have a sub reconed to? 18" ? and thers noooo way it could be made bigger?

My friend just picked up two of these beefy lookin subs and I am gettin ready to order my FI's. Where would these sit in the FI lineup. I was guessin between Q and SSD, not to sure though.

how much does the bp power option raise the rms on a 12" ssd?? would one need this option running 2 off a rf t10001bd 1633rms @ 1 ohm? what coil would be the best-regular, copper, or flat wind? daily driver (possibly a comp here n there for somethin to do but rarely), in trunk of an 00 impala, 2.5 cubes each tuned to around 38hz, i listen to most all music, lots of rap turned up loud, cuz its loud n low.

I wanted to send out a thank you to Scott and Fi for making sure I had a sub here and ready for NOPI Atlanta! Thanks guys David Smith Hotwired

http://myspacetv.com/index.cfm?fuseaction=...videoid=7333299 http://s16.photobucket.com/albums/b6/galam...Picture1217.flv

I know more about the cutting. that is fine. But say I want to do a massive wall. how do I account for flex between the bed and the cab. I would bring it into the cab just an inch and baffle it inside the cab. will it be ok or will there be too much flex.This will be a FULL cut through. window and all. I hear the boot the fits between the cab and bed/shell is EXPENSIVE. how much are we talking? just an est. 200? or 1000?

please search your emails... Ive been waiting for 1.5 weeks now for a reply... I will resend one more time OEM work from [email protected]

Im looking into getting a 15 for daily use. I want it to be a daily pounder that sounds good also. i mostly listen to rap music. I got a memphis 1000D to run it and im looking at either the SSD or the Q, im on a budget so not sure which one i need with what options? Moeny wise which would be the best sub for what i am looking for? Only thin i know is it has to be a dual 2 ohm. help me out thanks

I seen the pic on here about 2-4 weeks ago and I couldn't post at the time my computer was messed up and i can't find the dang post now. Anyways you were doing a build and had pics of it. I remember looking at the pic and could swear that looks like car tune automotive's parking lot. Is it?

Scott, I ordered a recone kit over a week ago for a local customer of mine to recone his 03 xxx motor. Im sure your just super busy but wanted to see if you happen to get a chance to build it or ship it out. Paypal address was [email protected] . Just figured this would be the best way to get in contact with you. Thanks Corey

So.....I just installed the 4 Q15's in a sealed enclosure (8.6ft^3 after displacement) running on a IA 40.1. The car is a '07 Dodge Magnum, a 140amp Alt, and a 2nd NSB90 Battery. The meter was an AC, but it was recently calibrated and actually metering about 3 db lower then the other one I was previously metered on...(not that that reallly means anything) anyways, I hit 163.5db outlaw and 162.1db legal. I am competing tomorrow on another AC, and I'll let you know how I score there.

Sorry for having to make a post, but Scott I've sent you several PM's over the last 2 weeks and e-mailed you a couple times and still have not gotten a reply... I don't know if you're just missing them or what, but I need some questions answered. Joseph.