Fi Products

Well this will be my first use of Fi subs. I'm going to be running an IA 20.1 and want to run 2 12" Fi's in a sealed box. I have been suggested SSDs, BLs and Qs. I am coming from an SI Mag 15" and loved the way it sounded at 2.5 sealed, but I could use a little bit more bump. I would like to run the IA to it's full potential (1800x1 @ 1 ohm) so for SQ and SPL which should I choose between the 3?

I need a recone for a 18 Inch d2 Btl fully loaded with univ. 44203 is the zip

i have never really have any experience with Fi audio and was hoping to get some feedback. i want to switch to fi subs but i dont have the money yet and i saw that fi x-series was on sale. i currenly have two 12" memphis hpo (old m3) on a 1000 watt amp, but my question is should i get three new 12" Fi x-series? would they sound better than my two hpos? nothing is wrong with the hpos, i just want to get new subs? would the x series be better or should i just stick with my hpos?? any input is appreciated. thanks

I THINK i'm set on getting the Q12 but a lil confused on which impendence to get. The sub will be powered by a Kicker ZX1000.1. Do I want to go with the Dual 1 Ohm or Dual 2 ohm? Thanks!

Well I've been reading on here for a month or so and I figured I should just join to get some opinions. Right now I have two rockford fosgate 12 inch t1's on a rf t10001bd in a prefab ported box. Well I'm going to be putting them in a different vehicle plus I've been wanting to get louder anyways. I was wanting to do two rf t1 15's but I figured I should ask on here and see what I can get that would be louder than those. I listen to pretty much rap and I'm wanting that loud low deep bass so probably like 75% spl and 25% sq. Whatever I get will be going in the trunk of a 98 dodge avenger and I plan on having a rf t20001bd to power whatever I get. I'm thinking either 1 18" …

where can i get big or small fi window decal's?

im getting 2 15'' BTL's fully loaded and my box is going to be tuned to 32hz but my amp i have dont have a subsonic filter so im getting one from Harrison Labs and they come in only 20hz and 30hz filters.. Which one should i get? thank you

Ok, I am most likely purchasing the L1 and L4 legatia drivers from Hybrid next week, and would like to use the Assasin 8's to complete a 3-way active component system. My plan was to xover the L4 down to ~140 maybe 150, then have the 8's from that number down to about 45, and the 15" Q from that down to 28. Would the assassin 8 be great for this? also, I wanted to mount it in the doors, (the L4's and L1's are going in kick panels). how wold it do in IB and what kind of power handling am I looking at? (i could build little sealed enclosures for them in doors if needed. (crossing fingers) hopefully will be ready for some of next seasons SQ competitions. re-posting it here b…

scott,nick,shawn got ne mt motors laying around for sell? putting together a project :)

i need a new one, how much do they cost??

So, I will be putting a couple subs in my new car and am not sure what to do. I wanna get loud, but I am not sure what exactly to throw into the trunk. How would 2 15's sealed compare to 2 10's ported?? I like bass alot, especially when it shakes everything! Anyhelp would be great. Also, gotta do either 2 10's or 1 15 ported to save some room. I will probably be going with Q's or BL's.

Thinking about a single 15" sub and Fi's are on my list of options...Any major differences in sound quality between the Q and the BL? I like bass on the tighter side that will play loud w/out getting muddy. What are the benefits of a getting a BL w/options? It will be for a daily driver. Usually listen to rap, but i throw some rock in there about 25% of the time, and want a sub sounds good playing both types of music. Thoughts/comments?

I just bought the amplifier that I'll be using for this setup. It's a Crunch PZi1500.1. It puts out 1500 watts rms at 1 ohms. It realistically gets 1300 watts rms at best. The sub I'm planning on buying is the Fi SSD 12" Dual 2 ohms. If I'm planning on running 1100 to 1200 watts in this sub which options should I have. I do prefer SQ over SPL, but I'd like to run it with as much power as possible. The gain will be turned down for daily use. I just want to have the power there in case I need it. If it helps I am gonna go with a custom made ported box 2.5 cuft tuned at 33hz. Help from Scott or the other guys that work at Fi would be great.

I am going with a sealed mdf box for 2 fi X. The box that I have is 30.5 x 12.4 x 12.8 inches. Do you think this is a good sized enclosure

when you order a Fi BTL subwoofer how do you know that it is a BTL and not any other Fi subs, because in the pictures all the subwoofers look the same

I took my box and 2-18'' Q's to get airbrushed. My box airbrushed to look like the cube from the movie Hellraiser and to have all my favorite horror movie people airbrushed on the whole cone. The shop next to it caught fire and burned up all the stores in the little strip mall. So I would like to know if I should get the new Havocs or stay with the Q's? The Q's hit hard and loud but I think the Havocs would hit harder and louder but I need them in dual 4 ohms. The Q's are dual 1 ohm. I need to run a 1 ohm load to my amp for full power. I have the MTX TE4001d. 3900 watts at 1 ohm, 2451 at 2 ohms, and 1323 4 ohms. Box size 7 cubes each after port tuned to 30hz. So would the…

Alright. i am pretty much set on getting two ssd 15's. does anyone know of an amp that will work with this setup. right now i have two 12 type r's (which are so freakin boring haha) on a pheonix gold rsd1200.1. My price range for a new amp is pretty open.

Hi im just now getting into Fi audios products i havent heard much about them but im wanting to do 2 15'' fully loaded BTL's in my cut through of my pick up.. im gonna have 2 orion DC5000 amps and im wanting to know if the subs can be mounted any which way or do they have to be mounted a certain way. I currently have 3 kicker L7's off of one Orion DC5000. Will the 2 15's get a lil bit louder beings that im going to have more power? Will they sound better than my L7's and are the Fi's durable and long lasting cuz i dont want a sub thats gonna quit out on me after a couple months... p.s. im an all out spl freak.. so i want to make sure the FI's are gonna kick ass lol

Just wondering if they will be making anything new and different with the year 2008 on the BTL's

How does the BTL 15" stack up against the 15" tc sounds 3000 series?

i got a quick question. Can a 15'' fully loaded BTL handle 3,000 watts rms for a pretty long time?

i saw somewhere someone said they got a 15 btl pushin a little ova 3000rms. how is that when the specs say 2000rms?

Would be using a earthquake PHD5k amp, "3000 rms at 2 ohms" whatever at 1 ohm rms maybe 4? o0 Anyhow, Wondering fully loaded BTL or would BLs be able to handle the 4k rms fully loaded? I wont lie, I love loud, and <3 bass. Who here doesn't So they will be getting slammed hard as I can. But dont flame me it wont be in residential areas

Ok, i just bought an us amp md3d, and i was wandering whether to get 2 bl 15's or 1 btl 15 fully loaded The bls would be more but which one do you think i should get, want the loudest one possible, bass wise, one that hits harder.

I've scanned the forum and seen some suggestions on what amp to use to power a single Fi Q. I want to know what amp you guys are using if you have it and how well does the amp perform as well as cost.