Fi Technical

Hello all my box is finished,carpeted ,tuned at 33hz... what is the best tune for my subsonic filter? my ampi is a DD Z1 thanks a lot

I was just wondering which is best on the Fi Btl the dual one, or the dual two, an if order the universal what does it come set as or what? Please help me before i order thanks.

My friend is buyin a Fi Q with all the extras and we were wandering if any body had any old box dimensions and i dont want the dimensions from the website Q 15 – We recommend using a sealed box in the neighborhood of 2-2.6 cubic feet of volume. Ported box we recommend using 2.8-4 cubic feet @ 28-33Hz. Again use 12-16 square inches of vent area per cubic foot of volume. so plz if u have some dimensions for an 15" Fi Q ported box Thanks

Can somone toss me a few opinions on a sub box for a fully loaded Fi Bl 15. the max height of 16, with of 35, and depth of any. i used the 12volt.com port and box calculater. i typed in a 35 width,16 height, 16 depth. if came out to be around 4 cubes.with a port lenght of about 25, port with of 3inches i dont know if that right... i wanting to make a box for a tuneing of 30 or 32hz. i also used the RE calulater.. but it dont seem right... can some one help me out. toss in your opnion? i have a 1500 watt amp,i want listen to some bassy songs, mostly rap.

I just ordered my 2 12's with BP power option...just for good measure. I'm gonna have a T20001bd on em. I want to port em. How do you think 1.8 cubes ported to 32Hz for each sub would sound? Do I need to push for 2 cubes? I don't have much room in my car...but here's a pic of the trunk space I have with my previous setup. That was just 2 JL 10w3v3's I'm thinking of running the boxes along the side where the old ones were. So how would 1.8 sound? Still jam the subs hard, or do I need to go for 2 cubes or even more? More than 2 would be pretty tough, but I wanna build the fiberglass boxes once...gonna be alot of work.

Which would get louder 1 15" Bl in a ported box or 2 12" ssds? They would be powered by a saz-1500d. im wondering which would get louder and sound better. any help would be great.

need help guys ..i cant decide what to get ...here is a little info,i have a trans am and the box i going to get that fits the rear well it has 1.92 cubic feet per side ...i was going to go with 2 15" or 2 12" ....the amp i am going to use is a sundown 1500d the 2-12" i was looking at are FI SSD or FI Q and the 2-15"are fi ssd or fi q...its a sealed box ....for that amount of air space (1.92cu ft per side) what would give me the best bass sound...thanks

i have designed a 7 cft enclosure for an 18 btl. the volume is with woofer displacement. how do i calculate a port to 30 hz then? is this ok?: 4,72" * 19,69" * 29,92"

I'm needing some advice on a box design for a 18" btl (old style) going in the back of a 1996 gmc suburban. Its a daily driver (no competitions) and Im looking for decent sound quality while hitting low and hard. I listen to mostly rap music and a little r & b. Not sure which way I should face the sub or the port or any of the box details to best suit my needs. Space should not be a issue since its going in suburban. Here are some other details about the install. Amp: Memphis 16-2000d (old school mojo) Components: 2 sets of CDT CL-61A w/ a kicker zx200.2 amp Electrical: 200 HO alternator and 2 yellow tops. 1/0 monster cable everywhere Head Unit: Jensen vm9411x (Yes …

If one does decide to get this option does this by any means help increase the subs BL and if so do you guys have a estimated number...

Could one of you check my port length for me? 4 cubes @ 32Hz with 2.75" wide x 20.5" tall port is what I'm aiming for. I used an online calculator and it said the port needed to be 29.5" long... but someone else told me it needed to be like 36.5"? Thanks a lot

Before anything, how much power will a Q with BP cooling handle, if gains are set properly, no audible clipping, etc.? Okay, first off, the SSD should be louder then the Q, IN THEORY (disregard the box and everything), due to it's higher sensitivity, correct? Second, the SSD is known to be heavy on the low end bass, but a bit lacking in the higher freqs. How does the Q do? Will the Q slam as hard as the SSD? In other words, will the Q reach that ass-dragging low bass that rap music is typical of? Thanks, I'm going to ask a couple more questions based upon the answers I receive to this, so check back. -SteveSan

I'm looking for someone to build me the box specified in the "BTL Cut sheets" thread. I have the Fully loaded 12" (2010) model BTL sub. I would like to know how much it would cost (both for the box and shipping). And I like to find someone who has made these before and knows what they are doing. If you can show me pics of your previous work that would be great. I would prefer it if you had a PayPal account as well. If there is anything you need to know from me, let me know. Thanks for any replies.

My current box pounds in the 30-32hz range and I love it but I also love to compete in local competitions so I need a new box for all out spl. My trucks frequency is 41hz. Can someone help me with the correct box volume and port specs for a box that will peak at 41hz for spl only? The subs are a pair of Fi Bl 18s. Thanks.

Hey guys, I am new to these forums and new to Fi. What i was looking at over the past 2 weeks is that in order to power these subs, you need to require a) cash b) automotive parts c) More parts Lets just stick with b), Now i was looking at some of the earlier posts, alot of them were for the Iraggi Alternators. I myself have a 95 Honda accord. I Like it. I obviously need a new alternator if i am going to get myself 2 Fi subs. Everyone is going for the Iraggi Alternators. I myself can't find one anywheres on the internet. I checked eBay and all they have is 60amp. I am pretty sure 60 amp wont compare to a 2500w amp. So i came to the professionals, you guys, for some ad…

SO my buddy just picked up 5 diamond cm310d4's but two of them need to be reconed so i got a couple of q's 1. can you guys make up the recones an ship them out or would they have to be done inhouse? 2. what does he need to give you as far as messurements? (if recone is shiped) 3.would he also have to order new baskets since his are a stamped 8 spoke? 4.what would the price be on each one? (would it be cheaper to do all 5 at once) thanks for your help

Are there any 3D designing software to design a custom subwoofers box? thanks -JJ

Will a 18" BTL handle 2 Memphis 4kw for Street Beat or burps. Also when building for SPL only is it better to use a small or large box. Can you also let me know what a recone costs for a BTL a 15" & an 18".

I might buy a new dust cap for my sub i mean yeah it'd look odd but yeah this one i have is horrible. How much is it to buy one and how easy is it to put on? Also is it possible to just ship my sub to FI to see if they can recone it completely? Its a 4inch coil and idk the ID of it yet. Thanks Joe

Hey, I sent in my sub over a month ago. I tried getting ahold of Fi to let them know I never included an email or phone in the package because I forgot. What's going on with my sub? I should have it back by now? TIA

I am about to buy a FI btl and i was wondering if someone could give me good measurements of a enclosure with 10 cubes of space and is tuned to 32 Hz(s). If you need any more details please replay

I ordered a 12in fi bl with cooling and flatwind to run from a hifonics brutus brz1700.1. It will be putting out 1700rms at 1 ohm and the sub is dvc 2 ohm. I was planning on a box with the dimensions of 30x30x15 with a 2.75 in port. I was going to tune it to 34 hz so how long should the port be? Or should I get an aero port instead? I want the loudest possible setup with what i have.

I recently purchased one SSD in my old box and i absolutely love it. I will be ordering a second sub in a month and need to build a box for it. I am trying to figure out the dimensions for 2 12's around 4 cubes tuned to 32 hz. I am not sure how to create a box that fits these specs. My dad and i built a box for a w6 but all the dimensions were given so it was very simple. Any past build specs would be very appreciated.

I'm thinking about buying 2x FI 12ssd's and was wondering what amp would be the best choice for these subs?

hey hey i just got one of the re xxx 05 model and scott i emailed u about a few things such as specs and a 18" top end lol the 15 just dont make me happy so i wanna convert it to 18 anyone know how much this will cost? my buddy john Mulcahy told me to ask scoot cuz he was the one that designed these subs