Fi Technical

first system about 90% finish, would i need a dual 1 or 2 in this situation, dont wanna go 1 ohm strapped at all since they dont make HO alts for a 2002 deville yet, still looking... got a chamber t line built by rich that i,ve had for about a year now, 2 1500ds, 100.4 coming temp. highs i have arc audio fd6000 up front and kenwood excelon coaxils out back on a aura rpm4200 4 chan. clarion max675vd II for the headunit and a clarion equalizer. kicker kyperflex, kollosus 4 guage 4 chan on the way. no alt but i was told that the alts in the 02 devilles and dts really put out about 180-190 amps as told by ohio gen after they tested a few, also adding a powermaster also. thi…

I'm just curious as to why the Universal option isn't on the subs by default? It doesn't cost any extra money, yet i do not see any disadvantages of having it done to a sub even if you do not want it. So... is there any disadvantage of having it even if someone doesn't want it?

After hearing a BTL for the first time yesterday i have decided that i want one, really bad. I will only be pushing 2000 watts to each sub in a daily setup (no comps). Is there any point in getting the high XMax coil, does this loosen up the suspension for better SQ. the BTL that I saw was only getting 1500 watts and didnt seem to flex much so im not sure if the high xmax coil would really do anything. Thanks, Keith

Just placed an order for my 15" BL Anyone willing to help me with a box design? Trunk Dimensions Estimating: 36 x 36 x 18 width = 36 in. length = 36 in. height = 18 in.

Hey I own a 03 Tiburon GT and am planing on putting in 2 12" BLTs with 2 SAZ-3000ds. I want to compete in SPL but also want to be able to listen to music (not as important). What type of box should i get ported or seal and should I get a wall or will it just be a waste of wood. I don't want to do a wall unless it will boost me db. Thanks for the help, I don't have a clue what to do.

i have an fi bl 12 that is practically brand new that i had bought for the honda i thought i was going to be using well now im stuck with this sub and want to put a system in my dodge megacab but havent been able to sell it and am not sure i have enough room back there to port it. i have been out of the game for a while so any help would be appreciated.....thanks

I am curious how much of a difference there is between a 2ft^3 and a 2.5ft^3 box tuned to 32hz for a 12" Q. I've read that bigger is better for ported boxes, but 2ft^3 boxes tuned to 32hz are readily available on e-bay. Would I be giving up a lot of output or response for the convenience of an easily available box, or would this be a good buy? If it matters the Q will be powered by a 1000 watt MB Quart raa1000, and going in a 93 Saturn coupe.

Been debatin on 3 10" bls or 1 15" BTL off of 4Kw. I'm thinkin about goin with 1 15" BTL so i got some questions. What options do i need exactly for the following scenario? - It's for daily, tuned to 33hz, running off of 4kw of power. No SPL but i will be playing, sometimes, bass tracks for show off purposes. Absolutely no clipping guaranteed. Let me know if this is correct or if i should change\add something- Cooling, HIXMcoil, 3rd mag(do i need?), Daily. Can the BTL take 4KW daily? I know Meade does it but is it still safe in Fi's eyes? And i would like a discussion on the cooling option. It states not to get it if used for SPL. Can someone please define what specifi…

Hello, I have a kicker zx.750 and a single kicker 12 inch solo-baric L7 woofer. I tried a ported enclosure and now it is in a sealed enclosure, but I just am not getting the bass I am looking for. I have been looking into a Q series woofer and was wondering what size people would recommend and how big of an enclosure for the wattage put out by the zx.750. I currently have a 1992 lexus es300 (4 door sedan) but may possibly be buying a 1998 ford expedition. Could somebody give me some advice about what to do?

Hi all! I have a 2004 Dodge Ram Quad cab. These things are impossible for trying to put in subs without pulling out seats and all kinds of stuff (not interested in). Found a guy who makes a specific "molded" box that goes underneath the rear seats. I really want to go with the Fi Q 12", heard really good things about the Q's and I prefer 12's over 10's for the notes they hit. However, this box has a single chamber totalling 1.8ft^3 in a sealed setup for a 12". Will the .9 - displacement per sub be enough to adequately run? How much polyfil should I use? He also makes a 10" vented @ 36hz and 10" sealed. The airspace would be the same as the above box. Would it rea…

Why is the recommended tuning frequency for the Q 18 so low?

I sent an email asking this but never got a reply. I was wondering if i could seal up a SSD 15? If so what would be an ideal size for the enclosure? I checked the specs under the SSD section in the sticky thread but all i could find was "we are still testing sealed enclosures" etc. Thanks.

I recently purchased a 12" Q series sub. I am installing it in a ported enclosure and I am curious to the size and tuning. After purchasing the sub I found a deal too good to pass up on an amp that is a little underpowered for the Q. It is a kicker zx750.1. It puts out between 800-900 watts rms. I see on the pinned topic at the top the recommended ported enclosure is 1.8-2.5@ 28-33hz. With 12-16 square inches of port volume. My question is should I change the box size or port area since the speaker will not be driven at full rms power? I want to get as much out of the speaker as I can with the power I have available. I thought I would ask on here instead of calling seeing…

i sent my mt motor to you ...it will be delivered this upcoming monday..i have the tracking number if you need it...my email address is [email protected] shoot me a email after you get it fixed, i have a paypal account , i will pay a.s.a.p. ..

i just ordered a 1600 watt hifonic brutus mono and i need some help with the Q. im not sure if it would be better for the Q to be ported or seal, also if i should go dual 1 ohm or dual 2 with my brutus?

ok so my brother wants to get a fully loaded 18" BL for his 00' blazer. hes got a stock alternator i think 105 amps, and hes thinking of getting a hc1800 battery in the back with a hifonics xxv or xx thor amp. will his electrical be okay for this?

OK so i have a hifonics 1606 powering one 12 Q and i have the gain turned all the way down and the multi meter is reading 36.6 volts and if i turn the gain up to about half way it reads like 55 v. i am confused and my headunit is only 2 v preouts what is goin on, is there anywone that lives in so cal that can help me set my gains and check my setup because i am either just plain stupid or something is wrong.

i have a box i was using for some other woofers in that i put to use in my trunk. here are the measurements 35x16x16 with divider and two four inch ports 8" long each i kinda wanna stay with this box for now because it fits perfectly. the problem is tuning what is this box tuned to and what should i change with the ports? the wood is 3/4 mdf. any suggestions? thanks oh yeah in case you didnt know 2 fi ssd12's copper option in the box.

I have the following system... '96 Jeep Grand Cherokee 2 18" Fi BLs 2 Rockford Fosgate T10001's 1 Rockford Fosgate p500-2 1 Pair Infinity Kappa Perfect 6.5" components 1 Pair Alpine Type R Coaxial 6.5" Lots of Lightning Audio Wire Alpine CDA-7897 Head Unit + 6 Disk Changer 225 amp Excessive Amperage alternator Box tuned to about 34 hz My question is, I cannot for the life of me get my subs to play the same. They are phase, wired with 8 gauge, and the polarity is correct (as long as the subs are labeled correctly). I have the amps set for master/slave, set to give each sub 1400 watts. Does anyone know what could be causing this problem?

Is it ok to feed a single BTL 12" with 3000wrms daily? any issues you think I may encounter? thanks!

Hey, I have 2 tc 3hp motors. I know they need to be sent in to be machined to fit the 12 spoke mounting holes. I saw where you posted prices for a 3hp recone, there were prices for a 12/15/18. Can you do a 3hp 10" recone?? The motor measures 7.5 inches wide at the widest point. I'm hoping there won't be a problem with 10's. I'd like to send them this week, but waiting to see what can be done. Thanks FI.

Hey everyone, So i recently sold my 2 audiobahn 12'' sub woofers, and my amplifier. I have the money now to buy my 15''BTL fully loaded. I had a few questions that i am still not sure about. 1.What should my "ohms" be if im using a mono amplifier. 2.If my box is tuned to 3.25feet at 30HZ is that too little feet, and too low HZ? 3. Does anyone know a good mono amp to go with 1 fi BTL 15inch 4. Also is a BTL legit 2000RMS? i really aprciate all help, thanks everyone.

Ok, so I'm wondering if the Q is the right choice for me now. Roughly how much power will a fully loaded Q handle? I plan on running the 1500D at 1 ohm, so I suppose around 1600W. Thanks, Trevor

Hopefully someone can help. I found a 3hp motor, but it only has the 4 bolt layout where the basket secures. I've seen a few of these motors rebuilt w/ fi softparts so i know it can be done. My question is what cone assembly, or coils and spiders should I get (assuming I use FI) to make it perform similar to an eclipse TI? Also, what basket should I use, or is there one that I can use with a four bolt pattern? I need some guidance and am a little knew to this so bare with me please, and maybe a price range so I know what I'm getting into. Thanks for the help. Also, when do the new woven tinsels come into production, and will all products be switched to this? It's …

I've seen that Fi is using woven leads at least on some products, is the Q on of these? Also is this change going to make it over to the AA Havoc any time soon?