Fi Technical

Do you guys offer a recone kit from Fi that will fit the RE SX motor? If so, could you PM me a price please? Also, would you be willing to sell the recone + motor for a Q? Let me know!

I just ordered a FI ssd 12 inch subwoofer, a Kicker zx750.1 amp, and 4 ga wire kit. I previously built a 4.0 cu ft box out of 3/4 mdf. I was wondering if the ssd would be alright in this box. Also how long would the port need to be if using 3" dia. pvc pipe so it is tuned to 33 hz? Thanks.

ok so i have a 15" ssd with copper coil and a us amps md 23 i ordered a audioenhancers ported box for it that was close to the required specs, but i got sent the wrong box. the one i recieved lookes to be 2.3ft at anywhere from 34- 38hz area will this work or is it going to be to small???

I am looking to build a slot port box very similar to the threads that are very recent in the forum. My dimensions are slightly different and I want to flare the port walls which will complicate things. My dimensions are: height: 14" width: 30" depth: variable tuning freq: 32 hz box volume: 2.3 cu ft subwoofer: FI Q12 Dual 2 amp: Soundstream PCA1500D Like I said I would like to flare the vent sides by cutting slits in the MDF and bending it. I have made some test bends and they seem to work out pretty well. I have read that adding the flares will require an additional 1-2" of port length. I can add the additional length that is required for the flared p…

I'm sending in my 3 hp motors to be reconed on WED. I need a addy to send them to. Also I believe its $148 to have them reconed to 18's including shipping each. Correct? So I you could let me know where to send them, and if its ok to sen'd a m/o with the motor, or would it be bast to calll me and I'll pay over the phone with my Debit card?? Thanks, Joe. P Also The 3hp's have the tall top plate. would there be any benefit to miacine cooling channels in the top plate?? Could you do a fully poly cap on the 18" recone(like a havoc), I've seen 1 done, and a 10 with a poly and Fi logo, I'd love to have a full poly with the FI logo. Would look great..

Hey I tried doing a search...I kept getting an error anyone know the specs on a TC7 motor?? I am probably going to buy one because of a good deal on it. What size coil does it fit?? Will a standard 12 spoke basket fit it???

right now i have 1 12" ssd fully powered in a ported box. it is 16X22X14. it sounds good and i listen to almost everything from rap to techno. I was wondering if it would be better to switch to a sealed box? i mean one advantage would be less used space. and which direction should i face the box also...

im trying to stay with an enclosure that is 3cf or less and trying to decide whats better, 2 12s sealed with 3000watts (buy a new sundown 3000 amp) or 1 12 ported with 1500 watts (keep my mtx 1501d)? if the sealed subs would be louder, how much louder? last option is 2 10s ported. looking for LSQ, basically the loudest set up i can get with the space available. appreciate the help!

i'm looking for a speaker box plan for my fi bl 18. would this box work or should i go bigger? http://img35.imageshack.us/my.php?image=5c...hz62sqin6hk.png

Would be grateful for any help. I just got my 18 btl in the mail and would like to start to build a box. I have built alot of sealed boxes but haven't built a ported box. I drive a 98 tahoe so size is not a problem. It will be used in a daily setup would like to tune that way but get loud thanks for any help

I need box plans for a Fi Q12 (dual 2). It going to be powered by a Sundown 1000D. I want it to get loud but also have SQ. So Im thinking tuning it to 32hz. Fi recommends 12-16 square inches of vent area per cubic foot of volume. The demensions I want to use are 14.5 H, 28 W, 18 D. (can change alittle)

hi i wanna buld a new box for my bl15 i have my 15 bl in a 3.25 cuft box right now, my question is if i make a biger box lets say 5 cuft after port and sub displacement would it get louder thant what i got??? i wanna know if its realy worth it building a biger box.

Before anything, how much power will a Q with BP cooling handle, if gains are set properly, no audible clipping, etc.? Okay, first off, the SSD should be louder then the Q, IN THEORY (disregard the box and everything), due to it's higher sensitivity, correct? Second, the SSD is known to be heavy on the low end bass, but a bit lacking in the higher freqs. How does the Q do? Will the Q slam as hard as the SSD? In other words, will the Q reach that ass-dragging low bass that rap music is typical of? Thanks, I'm going to ask a couple more questions based upon the answers I receive to this, so check back. -SteveSan

Just wondering if someone could give me some plans for a ported box. Nick told me to post here and someone would be able to help me.... sub - Fi Q12 amp - TXA 1000-D max dimensions: -Height - 16" -Depth - 18" -Width - 36" Thanks, Ryan

What is the best option setup on a BTL for SPL use only and how much power will they take for Burps only?

how big of a box should i build for 2-12 btl? It will be powered by 2-40.1, i was thinking 4 cu at 35hz bad idea?

So, here is my problem. I am going to be running one sub and I have a slight "Monk" issue...for those of you who know that show. I feel like things have to be balanced out. So, I want to put my sub in the middle of the enclosure and would like to have two ports, one on each side. Is this clausable and how do I go about figuring out how much port area I need. The specs say 12-16 sq inches of port per cu ft of box volume. So I am planning around 40 sq inches of port area total. Would this be 20sq in per port or am I calculating this incorrectly. Any and all help would be happily listened to. Thanks

I own a 2003 Mustang GT, and am trying to get the best system I can in it. I have VERY limited trunk space and so chose a single fully loaded 12" BTL powered by a Kicker ZX2500.1 (2500 watts RMS into one channel @ 2 ohms). I also have a kinetic 2500 in the trunk. The trunk opening is too small to get any sized box thru so I'll be installing it thru the back seat. The opening is 13" high by 32" wide, and 28" deep. I'm looking for a ported box to get the most bang out of the sub. Anyone got the best design for the BTL with the max dimensions (13x32x28)? Thanks.

I was wangin my ssd the other day and it was wangin hard, loud just like fi should then i turned it off went inside and about 2 or so hours later i went back out there was about to leave and the sub or amp just didnt pound like it did before. It just wasnt as loud and didnt vibrate my whole car like it did before. I think it might be the amp, but im not quite sure. I figure it might be a connection problem or somethin, but i checked all that and no problems. Thanks Mike

So I have 2 designs to choose from. Both designs have a total of 11 cubes and tuned @ 31Hz. This design fires into the side of my Xploder back by the hatch... Subs up, port up... What you guys think? EDIT: Big thanks to AMATT85 over @ SMD! I will be running the Qs off a MTX 92001

12" ssd bp and flatwind options ordered it yesterday now i need help on dimensions for a sealed box any help or suggestions?

Do you think 2 loaded BTL's with daily option will work with 4 SAZ-3000D's in a SPL only setup (burp). This will be a 16 volt system and box after sub and port displacement will be 8.75 cubic feet tuned to 50hz. If not what subs.

I'm putting a Q10 in a sealed box and am looking for a good size for SQ. The website recommends .2 to .6 cu ft. I should have 1000 watts @2Ohms available. Would a larger or smaller box lend itself to better SQ. Thanks.

ok so the set up would be 3 12" BTL's (fully loaded) and 3 sundown 3000d's..I'm lookin for some basic dimensions for an encloser and some places online that can do a quality build.Also,any suggestions on port Fq. would be appreciated..It's gonna be a daily driver in a '96 impala trunk so i have room to play with.Thanks!

Ok, so I already have a Fi Q that I have been bumpin for about 4 months now. I am planning on getting a second Q after X-mas. Should I recon my broken in one before throwing it in a box with a new woofer? Also, what would be the total price for a recon kit with is being sent to 95677. The sub is a Q 18