Fi Technical

Hey i use to have 2 (dual 2)12" kicker cvrs running off of a zx750.1 now i have 2 (dual 2)12" FI ssds running of a zx1500.1 and my cvrs are louder then my ssds, the ssds are in a 4 cube ported box tuned to 32hz. My electrical is a 200a EA alt, Yellowtop under the hood. Ive got 10guage speaker wire, 1/0 power/ground wire. When i try to set the gains using the gain setting tutorial i dont get any voltage reading from my dmm so i try and set it by ear and the subs just stop playing when the subs arent moving that much. Im not sure whats going on. Im almost positive i hooked the subs up to read a 2ohm load i remember goin gfrom the positive from amp to positive to sub to posi…

after beating my subs for 8 months it appears my spiders got real soft. if i pust the cone its not as stiff as it used to be. so i was wondering. if i recone my subs, how much increase in output will i see. a rough estimate will do. thanks in advance.

I'm seriously considering getting a Fi BL 12 and was wondering if the amp I link to below this would still be a good choice. Thanks in advance. http://www.db-r.com/sell/store2/index.php?main_page=product_info&cPath=65_67_69_105&products_id=248

Still need tinsel leads and a dust cap for an 18 BTL, older style

id like to know why my 4000 watt amp wont push 1 15 Bl fully loaded without blowing both my 40 amp fuses in it.

I recently had a s10 ext cab with a 15 inch bl in it which im now selling because I traded it in on a silverado ss....oddly enough bigger truck does not mean more sub room sadly so it won't fit. Ive looked around alot and can't seem to find a case where someone used 2 12s in a ported box under the rear seat of the silverado and im not a fan of sealed boxes but it looks like thats my only option unless smoene could suggest something else. Was thinking 2 12 q's or ssds running off my memphis pr1000.1 amp and im not sure if i want them forward facing or downward facing, Im sure i could get a little more airspace if they were forward facing but does it really matter which way…

For some reason outside of my power my 08 Bl with cooling caught fire. I was on my way home from work about an hour and a half ago, i smelt something kinda like burning leaves so I turned the radio off and pulled over and opened the hatch of my jimmy and the sub was on fire. I could see this bcuz there is aplexiglass window on the front of my box... I have no idea how or why it did this, it was on fire at the spider btw. The amp wasn't warm nor the wires... The amp isa sundown saz 1500d. 0g wire, 12g speaker wire. Itwas only playing for about 5 min when it all happened. I think the warrenty is still in effect, but I'm not sure if that is even covered. The gains are all se…

hey all. i want as big of a sub as possible but the only problem is that i will have only 16.5" of height in my trunk. thats means if i get a bl 15 my sub will be very close to touching the wood (height wise) in my subwoofer encloser. is it bad if the sub doesnt have a lot of clearance height wise in its encloser or does that only apply sideways in corelation to the port. just wondering if i should be ok soundwise with a tight box or will i sacrifise sound quality by doing this and just stick to getting a bl12. thx -phil

I have a 12" bl and and I recently built a new box for it. I noticed some what of a clicking sound coming from the sub. At first I just thought it was something rattling in the back of my car but today I went to check it out and noticed it was coming from the sub. It only seems to do it on the low notes and it doesn't do it every time either. I can't seem to figure out what or why it is making that sound.

where is the optimal placement for the sub cut out. i went a head and am building a box for my single 12"Q. and it's just a basic little 2.36cuft @ 31.69hzported box. i got to thinking before am going to make my cut out for the sub. should i put the sub closer to the port? or dead center? or away from the port? what are the advantages and disadvantages of each? and what would you recommend? also the sub cut out should be at 11.7 inches right? on the website i got that from the cut ID number. thanks guys

i would greatly appreciate it if someone can tell me where i can get a book/manual on how to build enclosures all types

i know every car is different. i have a civic sedan 98. my btl is firing forward with the port forwrd. i was wondering will it get louder if i face everything towards the rear of the car.

i am planning on hooking a fi bl 12 up to my kicker zx 1000.1 amp which is 2ohm stable. do i buy a dual 1 ohm sub or a dual 2ohm? please help! thanks

I have an ssd 10 under the back seat of my nissan titan and im havin problems with it hitting the grill i have on the box when it pounds. Ive been adding wood to create more space between the sub and the grill but i was wondering if there are any other techniques i could try. Any help would be appreciated.

Guys Prob havent post for over a year now, thats because I have kept all my things in the closet and lost touch about car audio while playing mafia wars LOL. My question are: i. How long does a sub magnet stays magnetize? In my place 33c-35c is considered a normal sunny day. ii. Does heat from the sun + heat from playing music will effect the magnet strength? iii. Does keeping the sub in the closet (its bare and I didnt put it in the box) will have other effects like rust, deterioration of rubber, spider getting weaker etc? Btw I own 2 15Q's which I bought back in 2007

hey all my brother is about to buy a 15 Bl(d2, cooling) and hopeing to run it off a b120d(brutus) in an enclosure witch is about 3.4-3.7 cubes...idk about how much port tho.. i do have a couple of questions tho.. is the Bl ok to run at 1200, i know the rms is at 1k and i think it can take the extra 200 watts but i want to make sure that it can, can it? is 3.4-3.7 cube well enough to run the bl at, and if so how much port would i be looking at? ok with ported boxes is it better to have the sub more towards the begining of the port or further away from the port begining? thanks, steveyblack

First i want to say hello, first time posting here (hope its in the right section) and after hours and hours of searching and learning i figured i would ask you guys. Well my old system ended up taking a crap on me, the 7 year old crossfire cfa-402 amp i had finally died (still kept the amp) so i upgraded to a Alpine mrp-m1000 amp to give me some room to upgrade, about 4 weeks later my sub died due to my stupidity of not keeping my finger off the volume knob (mtx 5500 15"). but hey i bought it 3 years ago before i knew anything about car audio and it was only $164 and i know i can get alot better from Fi. So now I'm without bass and I'm looking to upgrade to Fi since i …

I just hooked up my brand new fi ssd 12 dual 1 ohm sub and hooked it up to a kicker zx750.1 amp and put it in a 2.5 cu ft box tuned to 33 hz. i turned the gain 1/2 way and bass boost to 9db. When i turn the head unit up the sub starts to smell like its burning glue or something. any ideas?

Hey everybody, i have 2 2400 watt mono amps (linked together it makes a 2 ohm load) each amp is 1700 rms (by titanium power) im hooking up a Fi 15"btl 1ohm dvc. how do i wire my sub to have a 2 ohm load? Because my amp goes in protect mode at really high volume help please!!! i just have it wired like this (dont pay attention to the ohms) this connection works alomost to the highest voulume output on my stereo but then goes to protect mode http://www.rockfordfosgate.com/rftech/woof...mp;woofer_imp=1 i tried this but it gets the amp in safe mode at mid volume http://i81.photobucket.com/albums/j230/spa...SERIES-DUAL.jpg any help please!!

Hey, I sent in my sub over a month ago. I tried getting ahold of Fi to let them know I never included an email or phone in the package because I forgot. What's going on with my sub? I should have it back by now? TIA

what fi specifiacations (dual voice coil, hixm, etc) shoud i pair up with a 2600 rms hifonics?

I bought 2 12" SSD 2 ohm DVC subwoofers about 4 months months ago. I finally finished the fiberglass box three days ago. Anyways, I'm using the Sundown Audio Mono 1500W rms amp, and as my cousin and I were looking over it we realized that there was no possible way to get two 2 Ohm DVC subs down to one ohm with that set up. We'd have to do 2ohms which would only be giving me half the power from that amp. My question is, what can I do about it? I emailed [email protected] 2 days ago and I haven't gotten a response so I was hoping the forums would be a little faster. Is there any way that I could ship the subwoofers back to you guys and get the dual voice coils changed to…

Hey guys I'm running (2) 12 btl on 4000rms tuned at 35hz. My low past freq is set some where between 75hz-80hz but no high past filter.I ordered an pfmod adjustable subsonic filter but I'm not sure should I set it at 30hz or 35hz. I would have preferred setting it at 33hz but it not an option on the filter that I'm useing. Fi recommend setting 2hz to 3hz below enclosure tuning thank guys.

hello, well i decided to put my (4) Q 15in. subwoofers in the bed of my chevy s-10, standard cab, it will be a blow through, has anyone done this? where can i get some information on how to do this? where i can find the boot to put between the cab and box? well thanks for your help, Brian

Will somebody please explain to me where the length of the port is. In order for my box to be tuned to 32Hz it has to be 22.5" long but which piece of the box is it? is it C or B?