Subwoofers / Speakers

Hey guys. I' m going to be buying a new sub in a couple weeks. I can't decide between a 15" DC Level 4 or a 15" Fi Bl. I will be running it off of the AQ1200D. My goal is to get the loudest/hardest bass. Thanks for the input!

I have a ED Nine.1 and I need help deciding on what subs to get. The amp supposed to do 1200w RMS @1ohm 12.5v. I have a MB Quart 4125 powering a pair of ID CTX65cs comps and a pair of ID CTX65 coaxials. This is all going into a '09 Jeep Wrangler Unlimited. I listen to all types of music. I want something to get low and loud. Would 2 Icon 12's be a better choice than 1 Xcon 12 with that amp?

i have a ab400.1 and i have dd1008a and a dd1510 that im going to recone to 15's.im going to pick up 2 more dd 1515's soon.i was wondering if my ab 400.1 is to much power for 4 dd 1515s4? im going to use this setup for daily use and comp use. this setup will be going in a 1991 ford explorer.

I've been looking to upgrade to either 2 12 SA's or 2 Lethal Injections. Ill be powering either set with a Sundown Sae 1200 v2 and will build an enclosure to specifications. I know it'll probably just come down to brand preference since both are quality subwoofers. So basically I'd just like to hear other peoples input because I havent heard any sundown or ia subs. Thanks in advance, looking forward to trying something new.

Currently own 1 Fi BL 15 and I have been looking into competing. I have been doing some reading and a common limitation for the lowest power class in USACI, (1-600watts at 4 ohms? best I could find: stock 1, street beat 1, etc.) is one 12", two 10" or 3 8". Feel free to correct me and my stupidity any time! If I was looking to compete in said class(es), one 12 seems to be the cheapest route, so here are the options I have found for my budget, (whatever I can get for my BL + less than $100) 1: Used DC level 4 XL, (dual one) for ~ $290 (should I turn into dual 2? is that possible?) 2: Just the motor of the level 4 XL (send it into PSI or something and get it rebuilt?) …

So what size speaker wire should I use to go from my sub to sub box? Also what size should I use to go from my sub box to amp. I am getting a 12" Lethal Injection and a Sundown Audio SAE-1200D. Thanks in advance. Jeremy

I'm using a stealth enclosure that holds a single 10". Mounting depth is 8" and has .75 cu.ft air space and is sealed.I listen to all sorts of music,rock,rap,r&b,metal,etc. I have looked at the following subs...Alpine Type-R 1042D(sounded good),IDQ v.3 (haven't heard) and Re Audio SE-10 (haven't heard).That 's mostly where the problem lies,I don't have any dealers locally that I can actually listen to these subs. I already have a MB Quart Discus 500.1( 250W x 1 @ 4ohms, 500W x 1 @ 2 ohms) that I picked up a few weeks ago for cheap.Would like to keep it under 150.00. Thanks

selling my 12" ssps wondering if any one was intrested down in southern california

I'm using a stealth enclosure that holds a single 10". Mounting depth is 8" and has .75 cu.ft air space and is sealed.I listen to all sorts of music,rock,rap,r&b,metal,etc. I have looked at the following subs...Alpine Type-R 1042D(sounded good),IDQ v.3 (haven't heard) and Re Audio SE-10 (haven't heard).That 's mostly where the problem lies,I don't have any dealers locally that I can actually listen to these subs. I already have a MB Quart Discus 500.1( 250W x 1 @ 4ohms, 500W x 1 @ 2 ohms) that I picked up a few weeks ago for cheap.woild like to keep it under 150.00. Thanks

So I have a 2007 Honda Accord Coupe. I am looking to get a 12'' Lethal Injection and I am looking for a sub box. I was looking on the Fisher Custom site but that is out of my price range. I was hoping that this one I found on SonicElectronix would be good. If someone could please help me out it would be much appreciated. I will ask my other question here so I don't make an extra post. Like stated above I want to get a 12'' Lethal Injection and I was wondering what would be a good amplifier to get? I was looking at a Sundown Audio but I guess the prices were just raised? That or the 1000 watt was taken off of this website? If someone could help me out it would be much ap…

I have the chance to buy a brand new rockford T1 12" for $180 each or should I go with some RE SEx 12" for $160 each? Im running a sundown 1200d v2 to them so its gotta be able to handle the power. I just want a sub thats going to work good in 1cu ft sealed. hard hitting is key

I was going to shoot for Fi SSDs or BLs to go with my sundown 1200d v2 But I can grab brand new Rockford P3s 12" for $220 from my buddy who bought them and decided to go a different route I know most of you on here eat, sleep and breath car audio but over all what do you guys think of these subs honestly? Can they handle a sundown 1200d v2 without turning everything way down? By no means do I plan on cranking it way up, but I just dont want to blow these subs with that amp. So for the price what would you guys do?

Tru Technology S44 (2x200 @ 4 ohms) to a pair of DLS X-Program SA62 6.5" comps. Speaker wire size recommendation? Thanks!

I found a good priced amp for the LI 12 I'm getting soon and was hoping to get some feed back on if it is a good buy or not. Phoenix Gold RSd 600.1 (RSd600.1) (rsd6001) Mono Subwoofer Amps Car Amplifiers Car Audio Car Audio, Video, & GPS Navigation - Sonic Electronix The link is what I was looking at. So if I were to get that amp and get a DVC 4 ohm LI would I wire it like http://a248.e.akamai.net/pix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/1DVC_4-ohm_mono.jpg <That? Any help and feedback would be much appreciated. Thanks, Jeremy

I know that this post maybe useless to some ppl, and I may not even get a single response but here goes. I am planning to purchase either a single 12" or 15" IA Death Penalty for my application. It will be going into a 2000 dokota ext.cab and am running the AQ2200 in either a 2.5 cb.ft net for the 12" or 3.75 cb.ft net for the 15". I was woundering which would play the low end with more authority. The reason for my asking is for a 15" enclosure, the enclosure will take up most all of the cab space under the glass (no wall). I believe that with so much room taken up, it would give the sound less surfaces to bounce of giving a more boomy sound than low end. Whereas with a 1…

Im in love with it! its not even broken in yet and it sounds deeper than my two audiopipe 15's! And i forget who said it but its does sound louder and deeper than my two 15s. But the other ones are louder on the meter. Plus its two to one. The magnet on this thing is huge (plus its 54 pounds). Can't wait til the Jan. 30 to order another one. Rusty is awesome. It came exactly when he said it would. Great customer service. i'll try to post pics today. The files on my phone is too large.

I WAS JUST CURIOUS AS TO WHEN THE FLAT CONES WOULD BE AVAILABLE FOR ORDERING BECAUSE I REALLY LOVED THE LOOK OF THE ONE I HAD SEEN IN A FEW VIDS POSTED AND I PLAN ON GETTING A NEW SUB SOMETIME IN THE NEXT 2 MONTHS ALL HELP WILL BE APPRECIATED

So right now I have an alpine type-r 10" sub in a sealed box. Im planning on buying another alpine type-r, would it sound weird if i put it in a ported box? Or should I just have it match the other sub in a sealed box? So basically, 1 sealed & 1 ported vs 2 sealed whats your input? Thanks

I was wondering what subs can handle 3000 rms these are the ones I have heard of and does anyone know of prices on these? RE MT RD HW/SHW Sundown Nightshade IA Warden T3 TSNS

I currently have a 2005 F=150 Lariat super crew. Im finally have enough money to do what i want with it (thank you afghanistan, nah jk afghan sucks). So far i found the right box for my rear seat without removing the jack. Its a fox box and it has about .80 cubic ft. So i started to look around for a sub that can fit its dimensions. I really dont want to buy a shallow mount sub without listening to it first. Im still in afghan and im wanting to get this by the time i get home. The last sub i bought was a 12" FI Q with an elemental designs amp and that combo was amazing. Im hoping to try something just as good if not better. HU: currently have a panasonic one but looking …

I see all these weird specs for a sub and I dont know what half of them mean. Is there a site that someone can link me to so I can read up on it? Specs Im talking about are below. Fs (Hz): 28.0 Re (Ohms): 6.60 Le (mH): 5.8 Qts: 0.52 Qes: 0.56 Qms: 6.80 Cms (m/N): 0.15 Vas (L): 54.3 Mms (g): 206.0 Mmd (g): 199.4 Rms (kg/s): 5.4 Airload (g): 6.4 No (%): 0.2 SPL (dB - 1W/1M): 85.0 BL (T*M): 21.1 *Xmax10 (mm): 16.2 Sd (cm2): 500 EBP: 50 Krm (mOhms): 3.65

i am going to be putting some subs in my room, i have pretty much narrowed it down to three woofers, which one should i get; Sundown audio SA-12 Incriminator audio Lethal Injection 12 DC audio level 3 12 Looking to be able to drop real low, im gonna tune the box to 25-27hz, it is going to be used in a home theatre setup i am looking for lots of output, but the most i can spend is like 250 per sub. With that in mind, feel free to throw in some other subs that you feel fit the description.

Its a down fire box and the speaker cut out is like 1/4" too big. Its 11 1/4 and the subs I have right now wont screw in because they screw holes arent furhter out than 11 1/4 for some odd reason. This is a box for 2 12s Its a downfire box so if I were to put a plate on there and do a new cut out Id lose some clearance. Any other suggestions?

working on my new build,getting ready to build my box. subs are going in a 2007 Chevy impala,looking for opinions on which way to fire my aeros.i know that firing sub's back and ports back would probably yield best output, but I'm not going to have enough room on the baffle for the subs and areos.so what about subs back ports to the driver side firewall or subs up ports to the rear/tail lights,basically a crx type box. not really wanting to cut the rear deck as I'm trying to keep the stock look, any thoughts or ideas would be appreciated. thanks

I just ordered my 12" Level3 sub. Im anxious to start building the enclosure and wanted to know if anyone knew the outer diameter of the sub. I want the sub recessed against the enclosure. Thanks!!!