Subwoofers / Speakers

i am planning on getting a 12" 2ohm dvc lethal injection and the buy is claiming that wired in paralell it will run at 1 ohm and be able to handle 1000watts rms. is this true?

Anybody heard them? I've read on ca that they are top notch comps... Wanted to know what you guys think about them, one dude kept stressing that they were made in china and overpriced compared to other brands. Thoughts?

My current box is 16cf net. with 232sq inches of port area, it was built for four 18's The first set of subs eD 19ov.2s [ pros] accurate, clean bass deep impact [ cons] weak suspension second set up audioque hdc3 18's [pros] durable, and veryloud [cons ] sounds like horse ass, lowend sounded hollow. Now i'm lookin at SSA X con. Just wanna know should i swap out 18s or build a new baffle and step down to 15's since my air space is limited for most 18s. I'm not an spl fiend nor an sq purist i just want a daily set that pounds hard and sound great at the same time btw my ports on my box is tuned@33hz

How much power would you guys recommend for a DC Level 4 XL 10 or 12. I just want the shock factor of holy shit thats a 10?!?!?! lol

i need a z 15 d2 u guys now if any left i pm jacob but got no answer yet need to buy one yesterday

If I have D1 12" AA Mayhems and I hook them up to the sundown 4500D by running the voice coils on each sub in series(which makes each sub a 2ohm load) then run them parallel to the 4500D would that give me a ~1ohm load to the amp? Or am I missing something here? Ive been told by many different people who are very well versed in audio that I need D2 and D1 for that amp. Any insight or help? Also the electrical is big 3, 220A alt, 3/0ga run to two 3100D batts, then hooked up to the 4500D.

Couple Numbers so far- 150.0db @20hz (tone) 153db+ @26-27hz (Rubberbands Slowed) 155.4db @ 37hz (BME Click?) All on two DC 3000.1s sealed Vid: Thanks for looking! -Drew

i have a 08zx750.1 kicker mono amp and i have been looking into the ia lethal injection sub but not sure what type of inclosure to go with. If you are using this sub what spec inclosure do you recommend im looking with going with a porter box but unsure what port tune and size.According to reaserching 32hz sounds good but is it good for my type of music hip-hop/trance your input is appreciated.

Sorry, I hate to be that guy making all the stupid threads asking a bunch of stupid questions and in this case one that can't really be answered and has already been discussed to death. BUT... After all my reading I'm still not completely sure what to do. The vehicle I'm using is a Suburban so space really isn't an issue. Although I'd like to keep some usable space in the back. I probably want to stay under 8cuft unless going larger would produce substantial gains. I'd like to run no more than 3000watts rms. There's virtually no car audio "scene" where I live so this is really only for my listening pleasure, I'm not interested in competing since there's maybe a couple com…

I got curious and wanted too check out the ohm reading on my sub, so i just disconnected the speaker cable from my amp, then put the probes of my dmm on the the positive and negative cables. The dmm says its wired to 1.8-2.0 ohms. Is this normal? or by some mistake do i have a d4 ohm sub? I have a SS RL-p 18 d2, wired in parallel to my sundown saz1000d. thanks!

I managed to get my hands on 4 old school Rockford Fosgate 12" Punch Z's yesterday in about a 4ft^3 sealed box for 30$ and a pre-fab sealed box for 2 15's... Just for kicks and giggles, I put this setup in the trunk of my Grand Am hooked to a 1000w memphis amp. Drove up the street playing "I'm Raw" by Lil Wayne, turned the bass knob up, and just about S*** myself. I was absolutely blown away by the performance of these things! They don't look like they could blow the dust off of the dustcap.. but looks obviously aren't everything. For 30$, I'd say I've found myself a great temporary daily setup until I order my Z15. I'll record a video saturday while I'm off work to show …

My dad is looking for a good sub for the boat. It will be in a cutout in the inner hull in the cabin area, so it will need to perform well in IB. I'm not too sure of the amount of moisture it will be exposed to, and I'm not sure if any of the actual marine subs will perform in IB. Any suggestions?

Ok, I already have one 3512 dual 2 ohm and a single saz-1500d. just wondering if it would be ok to get another dual 2ohm 3512 and wire them down to .5 on a saz 3500, or to wire them at 2 ohm on 2 1500's? expanding in the future is a possibility too.

OK, I know that this topic will piss off 95.9999% of you guys, lol. But am using a AQ2200D and wanting to know which sub would be most suited for its intended purpose. Am deciding between the IA DR or DP. Am just wanting to know which would be most suited with the power. Am using either for a daily driver that sounds good but can get loud. Thanks

How do these two stack up against each other? I like Fi, but am now the owner of a DC amp. Matching equipment might be nice. Plus, I don't think anyone in Miami has DC.

some effects of the glue ....

Okay so i have a powerbass pb-b125dv2 and it is popped and i want an fi recone. I was going to get the re se recone from them. I was going to change the gasket to 12 spoke and buy the recone and drop it in. Will this work. And it is a DVC sub. Is this possible. The sub is pratically new.

some guy offered me a brand new re xxx 18 even trade for my fi bl 15s. the bls are only like 4 months old. do i do it. no goals just loud well defined music

so i found a just like new rf power hx2 15 for $200 but im trying to find sumthing a lil cheaper or atleast brand new that will satisfy. i've been thinking bout a sa-8 or orphan 8 and was wondering what the most power i should put to one daily to get the most output......im interested in any ones suggestions for single sub in the cab of a 76 caprice. going for spl not sq but wanna spend under $200 and run about 1000rms

I've briefly heard a pair of JL 10W6 in a ported enclosure, i liked there sound from what i heard, but i would like more output. My budget is ~$400 Sub will be going in my ext cab Silverado, and I'm willing to take/leave my back seat out. I listen to basically everything, from rap to country. About 70% rap/hip-hop and 30% everything else. My goals are to have a nice sounding setup, with a good amount of output. I'm not looking for amazing SQ, but I don't want a one note wonder either. I've been thinking about a DC LVL4, LVL4XL, SSA XCON, Fi BL; I've even thought about going with two lower power subs. I am leaning towards a single 15" sub or maybe even an 18". Whatever I c…

So i have a friend giving me 4 RF 12" punches tomorrow in a big sealed box. I'm wanting to put it in my car just to see how it sounds. I'm pretty sure the punches are 4 ohm DVCs. Anyone have a good diagram on how I should wire these for minimal impedance? It would be much appreciated. Also, if anyone is curious on how they perform, I will shoot a video and post it on here.

As of now i have an AQ2200 and 2 12 Type R's.. I cannot decide if i want to get 2 more type r's or sell the current type r's and buy 2 15'' HDC3s(copper) If i was to get the HDC3 i'd buy another AQ2200, but if i was to get 2 more type r's i would just use the 1 AQ2200 I alrdy know im going to need more batts with the 2 AQ2200 then i would with 1 AQ2200 and possibly a bigger alt. Dont think about budget when picking between the 2 choises Thanks Dom.

I have made up my mind that i want to run 2000wrms, but I can't decide is whether on 2 15's or just one 18. I feel the two 15's will just be too much and the one 18 will do what I want it to. I want it to be at least semi-musical, but kill the lows. Nothing too loud, just something louder than my two type r 12's that we shoved in my friend's camaro (build log coming) This is a daily driver setup. Nothing extreme, just an enthusiast.

Ok..My original plan was to go with a single 12" Q sub. However in my intro thread I was informed I would probably want to look at the BL instead. This is waht Ihave to work with: 1999 Mercury Cougar Looking at about a 1.1ft^3 Sealed enclosure. Amp: Kicker XS100 1200watts I'm aware the Q is rated at 1000w rms. I didn't think the 1200 would be that big of a difference. I read the BL is not a sealed enclosure friendly sub which kind of steered me on a differnt course. Any recommendations are welcome. I'm trying to keep it in the $300 and below range if possible. Thanks

Cant be deeper than 7" and the magnet diameter cant be bigger than 6.75" Must be a 12" And Ive already got the box and paid for it so it HAS to meet these standards Its a downfire box under the seat of my crew cab silverado Running an Sundown 1200 v2